We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Changes

Jump to navigation Jump to search

Scrub Brush

204 bytes added, 13:09, 6 December 2019
== Technical Specifications and Assembly Instructions==
# Cura Print Settings
##Scale to 101% so G-code will slice bristles
## Set layer height to 0.3 mm if using uncostumized bristles
##At least 25% infill
## Set default print speed to 60 mm/s
## Enable "Print thin walls"
###Min. bridge wall length: 0.5 mm
###Bridge skin threshold: 70%
###Bridge wall casting: 0%
###Bridge wall speed: 30 mm/s
###Bridge wall flow: 108%
=== Common Problems and Solutions===
* Include common mistakes/problems Bristles are not printing right**Change bridge print settings**Make changes to avoid bristle dimensions in building your OSAT and how to overcome them.scad*Bristle breaking during cutting**Try a different color or different filament (Any color PETG should work well)
== Cost savings==

Navigation menu