mNo edit summary
Line 1: Line 1:
{{305inprogress|May 15, 2010}}
{{305inprogress|May 15, 2010}}
{{TOCright}}
{{TOCright}}
== '''SYNRGY Hot Box''' ==


'''ED: CHANGE NAME OF PAGE (USING THE MOVE TAB) TO SOMETHING MORE SPECIFIC, SUCH AS [[Synrgy solar heating box]].'''
== Project Participants ==
== '''SYNRGY PASSIVE SOLAR HEATING BOX''' ==
 
  == Project Participants ==  
'''ED: REMOVE THE SPACE BEFORE THE PREVIOUS LINE TO MAKE THE FORMATTING WORK.'''


'''Spring 2010:'''
'''Spring 2010:'''
Line 12: Line 9:
==Opportunity Definition==
==Opportunity Definition==


My project is to design and implement a passive [[solar]] [[heating]] box. It is to be installed in the garage/jam space of Synrgy-reggae massive from [[Humboldt County]].  The band utilizes the garage from 8-10 pm when the average temperature in the room is about 45-50 degrees '''ED: Fahrenheit or °F.'''. I want generate enough energy to raise the temperature about 10 degrees, thus increasing the morale of the practice. '''ED: WATCH GRAMMAR AND SCIENTIFIC LANGUAGE.'''
My project is to design and test a passive [[solar]] [[heating]] box. The objective of the design is to collect heat and transfer it into a house via convection.  


Solar heating boxes are appropriate technology because it utilizes the resource available in an effective manner. This type of design is appropriate in almost any location, being that it's means of energy are solar and natural convection. Passive solar designs can provide a comfortable environment anywhere from garages and workshops to third world villages. It has a smaller carbon footprint than conventional heating systems.
---
It was to originally be installed in the garage/jam space of Synrgy, reggae massive from Humboldt County. However, due to lack of solar exposure, the decision was made to test the design at another garage right down the road that serves as the jam space for local bands Acufunkture and Blue Street Junction.
----
----
The heating box is built from a simple box frame w/ a tempered glass cover. In the middle of the box is a panel of corrogated metal painted black.  This is our heat absorber with a dead air space between the glass and the metal. Beneath the metal sheet is where our manifolds are. We attached it to the south facing wall with a cold air inlet duct at the bottom towards the floor and a hot air outlet duct above it.  So when the air heats up in the box, convection generates the air flow from the house, drawing cool air from the floor and releasing hot air from the duct above.
'''ED: SAVE THESE DETAILS FOR THE DESCRIBING THE PROJECT DESIGN AND IMPLEMENTATION.  ALSO WATCH SPELLING AND UNPROFESSIONAL WRITING, SUCH AS W/.'''


==Literature Review==
==Literature Review==
Line 51: Line 47:


==Criteria==
==Criteria==
'''ED: INTRODUCE THIS CRITERIA SECTION.'''
 


{| class="wikitable"
{| class="wikitable"
Line 105: Line 101:
| 25
| 25
|}
|}
'''ED: LET'S TALK ABOUT HOW TO FORMAT THE DELPHI.'''
 


*Alt solution#2 is a energy star floor heater
*Alt solution#2 is a energy star floor heater
'''ED: THE ENERGY STAR FLOOR HEATER GENERATES LESS HEAT?'''
 


==Budget==
==Budget==

Revision as of 05:54, 5 May 2010

Template:305inprogress

SYNRGY Hot Box

Project Participants

Spring 2010:

Opportunity Definition

My project is to design and test a passive solar heating box. The objective of the design is to collect heat and transfer it into a house via convection.

Solar heating boxes are appropriate technology because it utilizes the resource available in an effective manner. This type of design is appropriate in almost any location, being that it's means of energy are solar and natural convection. Passive solar designs can provide a comfortable environment anywhere from garages and workshops to third world villages. It has a smaller carbon footprint than conventional heating systems. --- It was to originally be installed in the garage/jam space of Synrgy, reggae massive from Humboldt County. However, due to lack of solar exposure, the decision was made to test the design at another garage right down the road that serves as the jam space for local bands Acufunkture and Blue Street Junction.


Literature Review

 ===Energy:It's Use and the Environment===

ED: REMOVE THE SPACE BEFORE THE PREVIOUS LINE TO MAKE THE FORMATTING WORK. WATCH YOUR APOSTROPHES.

This is a college level textbook that breaks down the physics of energy and heat transformation. It breaks down all of the necessary mathematical procedures on finding heating loads, specific heat, amount of solar insolation, ect.[1]

 ===The Passive Solar Construction Handbook===

This Book breaks down the necessary components of a passive solar house or heating system.[2]

 ===Solar Energy for Heating and Cooling===

This book lists the amount of solar insolation of virtually every city in America, breaking it down by the time of year, time of day and latitude. [3]

 ===Peer reviewed Journal===
 
A journal discussing the heating storage capacity of various building materials.[4]

Criteria

Criteria Weight Constraints/considerations
Generates Heat 10 Must be Passive/Increase room temp ~10 degrees
Aesthetics 5 Interior of box must be black
Cost 8 Less than ~$200 material
Heat Storage 8 System must be Closed at night/materials in room can increase heat storage

ED: NO OTHER CRITERIA, SUCH AS SAFETY OR DURABILITY?

Criteria Weight Alt Solution 1 Alt Solution 2
Generate Heat 10 50 20
Aesthetics 5 25 40
Cost 8 40 30
Heat Storage 8 45 25


  • Alt solution#2 is a energy star floor heater


Budget

Quantity Material Source Cost ($) Total ($)
1 Plexiglass 36"x48" acrylic sheet Professionalplastic.com $35.80 $35.80
2 Pasco Dryer vent kit nextag.com $8.10 $16.20
1 OSB Sheetwood 3/4" Arcata Lumber $16.00 $16.00
1 2x6x20 dougfir Arcata Lumber $9.08 $9.08
1 Can black bbq paint azpartsmaster.com $5.39 $5.39
A lot R-12 insulation Donated $0 $0
1 Corrugated sheet metal Recycled scrap $0 $0
TOTAL PRICE $82.47

ED: CHECK OUT THE EXAMPLE AT Help:Table_examples#Cost_Table

Tenative Timeline

March 15th-Collect Materials from Hardware store

March 20th-Collect Plexiglass and donated materials. Start taking measuring and taking temperature of the room. Start Calculations

April 1st-Have all calculations finished

April 2nd-Size the heat box

April 10th-Build box, Attach vents to house

April 11-15th-Test the box. Take Temperature of room. ED: USE A SIMPLE TABLE FOR THIS TIMELINE. ED: THIS IS NOT ENOUGH TIME FOR TESTING AND TWEAKING.

References

  1. Hinrichs,R.A. Kleinbach,M.H.(2005). "Energy:It's Use and The Environment." 4th Edition. Brooks Cole. New York.
  2. Levy, Emanuel(1983). "The Passive Solar Construction Handbook." Steven Winter Associates,Inc. Rodale Press.
  3. Jordan, Richard (1977). "Applications of Solar Energy For Heating and Cooling of Buildings." American Society of Heating, Refigerating, and Air Conditioning Engineers, inc. New York.
  4. Kedl, R.J.(2001). "Thermodynamics of Wallboard with Latent Heat Storage for Passive Solar Applications." U.S. Department of Energy. Sante Fe, New Mexico.
Cookies help us deliver our services. By using our services, you agree to our use of cookies.