Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Solar Pura: High-efficiency vertical solar still"

From Appropedia
Jump to navigation Jump to search
Line 99: Line 99:
== Contact details ==
== Contact details ==
Add your contact information.
Get in touch at (replace % with @) if you want to know more about the project or chat about solar stills. All plans are freely avaialble by request 
<!-- Don't change the next line unless you intend to change the categorization -->
<!-- Don't change the next line unless you intend to change the categorization -->

Revision as of 11:43, 1 June 2017

Render of the Solar Pura prototype in Fusion 360.
Solar Pura is an appropriate technology project aiming to provide safe drinking water by harnessing the power of the sun.

Around 2 billion people lack access to clean drinking water across the globe and many of those live in arid and remote areas perfect for the implementation of a highly efficient, low cost, small scale solar still. The aim is for it to produce between 5-10 liters of fresh water per day in a sunny climate, enough for a small family’s needs. The design has been optimised to be lightweight, low cost, robust and user friendly. And a scale functional prototype has been built and tested.

Solar Pura is part of my honours thesis in the school of design at RMIT in Melbourne, Australia. It is the culmination of a year of research into creating technology that can empower those caught in the poverty cycle and how by open sourcing designs and solutions we can give people the means to be self sufficient and build resilience for communities in need.

Vertical multiple effect diffusion type solar stills vs basin solar stills

You can learn about the mechanics and history of solar stills here solar stills and here improving basin solar stills and here understanding solar stills. These pages have a lot of great information on how single effect basin solar stills function. This design would have to be the norm for low tech solar distillation.

After many experiments and a lot of research I decided that a single effect basin type solar still could not meet these criteria and looked towards more experimental and complex designs. That is how I came across the work of R.V Dunkle and his 1961 paper on the topic of multiple effect diffusion solar stills[1]. As well as contemporary research groups such as Hiroshi Tanaka et al from Japan[2]. As well as researchers from Taiwan national university also exploring this space [3].

The principle behind the vertical multiple effect diffusion solar still is best described visually:

Multi effect diffusion principle

The multi effect diffusion principle works by stacking plates very close together to create different cells or 'effects' this is so that the latent heat of vaporization can be recycled multiple times before being dissipated into the atmosphere. From the diagram, Heat enters the device from the left while water is fed from above onto absorbent wicks. The wicks are laminated to one side of the conducting plate while the other side acts as the condenser. When the water on the wick is heated via conduction through the plate it vaporizes and then 'looks' for the next coldest surface to condense upon (the next plate) where it then drips down into a collection gutter that routes the distillate into a storage vessel. This process is repeated for as many effects as the device contains.

Researchers mentioned above have found that around 12 effects is optimal before returns are diminished. With 5mm spacing between plates being optimal to create the effect. This has lead to productivity for these devices to be anywhere from 20 to 40 liters per day per square meter. This is a 4 - 8 x increase in productivity compared to a single effect basin type still.

Project goals

For my project I developed 5 key design goals to focus my research around:

  • low cost
  • high efficiency
  • mobility
  • robustness
  • usability.

I followed a simple iterative methodology with 3 key stages

  1. Research
  2. Experiment
  3. Evaluate


There is very little experimental research that has been done on the construction and optimisation of these devices. Most of Tanakas designs he never built fully functional prototypes, just tested 1 effect and theorized the rest of the work. While the team at Taiwan univesity did build their prototypes, they were all hooked up to evacuated tube collectors that could supply a steady stream of 100 degree heat to the device. This coupling adds so much cost that in my eyes moves the device out of appropriate technology.

The inspiration for my design came from the Tanaka's paper from 2005 [4] where in he describes a multi effect diffuser that is coupled to a flat plate collector. I was very attracted to this idea because of its integration of the solar collector and the condenser. So from that point to move forward I used 3d CAD tools to flesh out the various systems and went about building my first prototype.

Next level heading

You may need deeper level headings. Just keep adding equal signs to get that.


You may describe your costs here.

header 1 header 2 header 3
row 1, cell 1 row 1, cell 2 row 1, cell 3
row 2, cell 1 row 2, cell 2 row 2, cell 3

See Help:Tables and Help:Table examples for more.


Your discussion.

Next steps

The next steps.


Your conclusions.


Contact details

Get in touch at (replace % with @) if you want to know more about the project or chat about solar stills. All plans are freely avaialble by request