2L Seeder / Salt Shaker

Project developed by [[[User:Kjkurtz|Kjkurtz]] (talk)]

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

  1. With an over abundance of plastic bottles, there should be some attachments that can be made to make tools out of them! This design can fit any 2L bottle and can be scales down to fit other size bottles. This takes an old 2L pop bottle and turns it into a seed spreader/shaker. With the handle and easy to use adjuster, it is easy to control the flow of whatever you are spreading. Here in the North, this could also be used as a salt spreader for the winter months.
  2. Picture of completed print using your printer
    Wood WorkingClamp Parts.png

Bill of Materials

  1. Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
    1. Upload and link to all source files from open source CAD
    2. Upload and link to all STLs

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer

Skills and Knowledge Necessary to Make the OSAT

  • If you used special skill – link to relevant Wikipedia or Wikiversity articles/courses

Technical Specifications and Assembly Instructions

  1. Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
  2. Include print time estimate
  3. Include assembly time estimate
  4. Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
  5. Consider video if appropriate
Example video summary of textbook
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Common Problems and Solutions

  • Include common mistakes/problems to avoid in building your OSAT and how to overcome them

Cost savings

  • If your solution is not a low cost one then it is not really appropriate.
  1. Estimate your costs
  2. Find a commercial equivalent, cite it and put the [url in square brackets]
  3. Calculate $ savings and % savings

Benefited Internet Communities

  • Name and add links to at least 5 using single brackets around [url name]

References

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: [1]
  1. web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].

Cookies help us deliver our services. By using our services, you agree to our use of cookies.