m (Text replacement - "| affiliations = " to "| organizations = ")
 
(75 intermediate revisions by 12 users not shown)
Line 1: Line 1:
{{777 notice}}
[[File:Kjkurtz spreaderassemb2.png|thumb]]
{{Device data
| manufacturing-files = https://www.youmagine.com/designs/2-l-seed-spreader-or-salt-shaker
}}
{{Project data
| authors = User:Kjkurtz
| made = Yes
| replicated = No
| cost = USD 3
| instance-of = Seed spreader
}}


{{777}}
== 2L Seeder / Salt Shaker ==
== 2L Seeder / Salt Shaker ==
Project developed by [[[User:Kjkurtz|Kjkurtz]] ([[User talk:Kjkurtz|talk]])]
{{Statusboxtop}}
{{status-design}}
{{status-prototype}}
You can help Appropedia by contributing to the next step in this [[OSAT]]'s [[:Category:Status|status]].
{{boxbottom}}


==Abstract==
Project developed by [[[User:Kjkurtz|Kjkurtz]] ([[User talk:Kjkurtz|talk]])]
 
== Abstract ==
 
# With an over abundance of plastic bottles, there should be some attachments that can be made to make tools out of them! This design can fit any 2L bottle and can be scales down to fit other size bottles. This takes an old 2L pop bottle and turns it into a seed spreader/shaker. With the handle and easy to use adjuster, it is easy to control the flow of whatever you are spreading. Here in the North, this could also be used as a salt spreader for the winter months.
# With an over abundance of plastic bottles, there should be some attachments that can be made to make tools out of them! This design can fit any 2L bottle and can be scales down to fit other size bottles. This takes an old 2L pop bottle and turns it into a seed spreader/shaker. With the handle and easy to use adjuster, it is easy to control the flow of whatever you are spreading. Here in the North, this could also be used as a salt spreader for the winter months.
# Picture of completed print using your printer [[Image:Wood_WorkingClamp_Parts.png|200px|right]]


== Bill of Materials==
== Bill of Materials ==
# BOM:
4 6/32 Hex Nuts
4 6/32 0.5in Bolts
100g of PLA Filament


## Link to all Source CAD and STL's : https://www.youmagine.com/designs/2-l-seed-spreader-or-salt-shaker
# 4 6/32 Hex Nuts
# 4 6/32 0.5in Bolts
# 100g of PLA Filament
# Link to all Source CAD and STL's [https://www.youmagine.com/designs/2-l-seed-spreader-or-salt-shaker]


== Tools needed for fabrication of the OSAT==
== Tools needed ==
# [[AthenaII| MOST Delta RepRap]] or similar RepRap 3-D printer
 
#
# [[AthenaII|MOST Delta RepRap]] or similar RepRap 3-D printer
# Screwdriver and Pliers needed for Final Assembly
 
== Skills and knowledge needed ==


== Skills and Knowledge Necessary to Make the OSAT ==
* If you used special skill – link to relevant Wikipedia or Wikiversity articles/courses
* If you used special skill – link to relevant Wikipedia or Wikiversity articles/courses


== Technical Specifications and Assembly Instructions==
== Technical Specifications and Assembly Instructions ==
# Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
 
# Include print time estimate
# Lay out all printed parts and hardware.
# Include assembly time estimate
# Cut off Bottom of 2L Bottle
# Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
# Slip Handle top over the top of bottle
# Consider video if appropriate
# Slip the end cap over the connecting cap as shown in the image
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
# Cut a small hole in the bottle for the securement screws
!<big>Example video summary of textbook</big>
# Add the screws and the handle to the bottle
|-
|<center>{{#widget:YouTube|id=yiJDx9dCfEQ}} </center>
|-
|}


=== Common Problems and Solutions===
Print time estimate - 6.5 hours , Assembly time estimate - 10 minutes
* Include common mistakes/problems to avoid in building your OSAT and how to overcome them
 
<gallery caption="Seeder Assembly">
Image:Kjkurtz spreaderassemb.png| All Materials
Image:Kjkurtz spreaderassemb1.png| Press Fit Caps and Handle Ring
Image:Kjkurtz spreaderassemb2.png| Fully Assembled with Handle
</gallery>
 
=== Common Problems and Solutions ===
 
* Do not cut the hole too large for the connecting hardware, use a knife to cut a small slot or use a drill to avoid frustration
 
== Cost savings ==


== Cost savings==
* If your solution is not a low cost one then it is not really appropriate.
* If your solution is not a low cost one then it is not really appropriate.
# Estimate your costs
# Hardware Costs for Nuts and Bolts $1
# Find a commercial equivalent, cite it and put the [url in square brackets]
# Filament Costs @100g is approximately $2
# Calculate $ savings and % savings
# Total Cost is $3
# Commercial equivalent for a salt shaker [https://www.homedepot.com/p/Stalwart-Handheld-Salt-Spreader-82-YJ487/301194135?mtc=Shopping-B-F_D28I-G-D28I-28_33_CHORE-MULTI-NA-Feed-PLA-NA-NA-BASE_SHP&cm_mmc=Shopping-B-F_D28I-G-D28I-28_33_CHORE-MULTI-NA-Feed-PLA-NA-NA-BASE_SHP-71700000041074942-58700004788397998-92700040946148972&gclid=EAIaIQobChMIrZKG5die5gIVUh6tBh0bRwqkEAQYASABEgKsrfD_BwE&gclsrc=aw.ds]
# For the salt shaker savings of $5 or 62.5%, however it can be used to spread multiple sizes where the example has a maximum diameter is can spread.


== Benefited Internet Communities ==
== Benefited Internet Communities ==
* Name and add links to at least 5 using single brackets around [url name]


==References==
* Michigan Sportsman - Deer Management [https://www.michigan-sportsman.com/forum/forums/whitetail-deer-habitat.84/]
* Michigan Tech Reddit [https://www.reddit.com/r/MTU/]
 
== References ==


* The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <nowiki> <ref> </ref> and <references/>  </nowiki>tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: <ref> web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html</ref>
* Initial idea for the design [https://www.cabelas.com/product/WHITETAIL-INSTITUTE-EARTHWAY-SEED-SPREADER/2521681.uts?productVariantId=5129382&WT.tsrc=PPC&WT.mc_id=GoogleProductAds&WT.z_mc_id1=04771747&rid=20&ds_rl=1252079&ds_rl=1252079&gclid=EAIaIQobChMIhbXpu-ie5gIVVh-tBh0XSAlEEAQYASABEgKOR_D_BwE&gclsrc=aw.ds]


<references/>  
<references />
<nowiki>
<nowiki>
Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health  care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in


[[Category:How tos]]
.
[[Category:Electricity]]
</nowiki>
[[Category:Electric lighting]].


</nowiki>
{{Page data
| keywords = 3D printing, plastic reuse, retrofit, seed spreader, handle, plastic
| sdg = SDG11 Sustainable cities and communities, SDG09 Industry innovation and infrastructure
| organizations = MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab
| license = CC-BY-SA-3.0
| language = en
}}


[[category:OSAT 3D-Printable Designs]]
[[Category:How tos]]
[[Category:Deer Management]]
[[Category:Salt Shaker]]
[[Category:Winter]]
[[Category:House Hold Items]]
[[Category:OSAT 3D-Printable Designs]]
[[Category:3D printing]]
[[Category:Plastic]]

Latest revision as of 15:04, 28 February 2024

Kjkurtz spreaderassemb2.png
FA info icon.svg Angle down icon.svg Project data
Authors Keenan Kurtz
Made Yes
Replicated No
Cost USD 3
Instance of Seed spreader
OKH Manifest Download

2L Seeder / Salt Shaker[edit | edit source]

Project developed by [[[User:Kjkurtz|Kjkurtz]] (talk)]

Abstract[edit | edit source]

  1. With an over abundance of plastic bottles, there should be some attachments that can be made to make tools out of them! This design can fit any 2L bottle and can be scales down to fit other size bottles. This takes an old 2L pop bottle and turns it into a seed spreader/shaker. With the handle and easy to use adjuster, it is easy to control the flow of whatever you are spreading. Here in the North, this could also be used as a salt spreader for the winter months.

Bill of Materials[edit | edit source]

  1. 4 6/32 Hex Nuts
  2. 4 6/32 0.5in Bolts
  3. 100g of PLA Filament
  4. Link to all Source CAD and STL's [1]

Tools needed[edit | edit source]

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Screwdriver and Pliers needed for Final Assembly

Skills and knowledge needed[edit | edit source]

  • If you used special skill – link to relevant Wikipedia or Wikiversity articles/courses

Technical Specifications and Assembly Instructions[edit | edit source]

  1. Lay out all printed parts and hardware.
  2. Cut off Bottom of 2L Bottle
  3. Slip Handle top over the top of bottle
  4. Slip the end cap over the connecting cap as shown in the image
  5. Cut a small hole in the bottle for the securement screws
  6. Add the screws and the handle to the bottle

Print time estimate - 6.5 hours , Assembly time estimate - 10 minutes

Common Problems and Solutions[edit | edit source]

  • Do not cut the hole too large for the connecting hardware, use a knife to cut a small slot or use a drill to avoid frustration

Cost savings[edit | edit source]

  • If your solution is not a low cost one then it is not really appropriate.
  1. Hardware Costs for Nuts and Bolts $1
  2. Filament Costs @100g is approximately $2
  3. Total Cost is $3
  4. Commercial equivalent for a salt shaker [2]
  5. For the salt shaker savings of $5 or 62.5%, however it can be used to spread multiple sizes where the example has a maximum diameter is can spread.

Benefited Internet Communities[edit | edit source]

  • Michigan Sportsman - Deer Management [3]
  • Michigan Tech Reddit [4]

References[edit | edit source]

  • Initial idea for the design [5]


.

FA info icon.svg Angle down icon.svg Page data
Keywords 3d printing, plastic reuse, retrofit, seed spreader, handle, plastic
SDG SDG11 Sustainable cities and communities, SDG09 Industry innovation and infrastructure
Authors Keenan Kurtz
License CC-BY-SA-3.0
Organizations MTU, Michigan_Tech's_Open_Sustainability_Technology_Lab
Language English (en)
Related 0 subpages, 1 pages link here
Aliases Seed Spreader / Salt Shaker
Impact 408 page views
Created December 5, 2019 by Keenan Kurtz
Modified February 28, 2024 by Felipe Schenone
Cookies help us deliver our services. By using our services, you agree to our use of cookies.