m (+ cats)
(48 intermediate revisions by 9 users not shown)
Line 1: Line 1:
[[Image:Windbelt.jpg|thumb|right|500px|One of the two Double-Mounted windbelts]]  
[[Image:Buzzardswindbelt.JPG|thumb|right|500px|Double-Mounted Windbelts™ made by The Buzzards.]]  


== Abstract  ==
== Abstract  ==


The [[Humboldt Bay Center for Sustainable Living]], in cooperation with Danco Builders, have commissioned several projects to inform hostellers staying above the [[HBCSL/Samoa forum Nov 6 2010|Samoa cookhouse]] (the future home of the Hostel at Samoa) about sustainability. One such project is The Buzzards’ Windbelt system. The Team known as The Buzzards consists of [[User:Xf1|Bob Xuesi]], [[User:Rsd26|Ryan Dunne]], [[User:Jdw83|Dustin Wiesner]], and [[User:Ddr15|Dustin Revel]]. The Buzzards were given the task to charge USB devices using a windbelt or an array of windbelts. The windbelt was invented by [http://www.humdingerwind.com/ Shawn Frayne] to provide emergency lighting in third world countries<ref>http://www.popularmechanics.com/science/energy/solar-wind/4224763</ref>. Shawn was intrigued by the principle of aero-elastic flutter and designed the windbelt to convert the power generated by this principle to usable [[electricity]]. This project will inform hostellers about this technology, and demonstrate that it has real world application. The Windbelt is not the solution for all of our future energy challenges but it is one of the many technologies that together will someday allow us to live sustainable lives.  
The [[Humboldt Bay Center for Sustainable Living]], in cooperation with Danco Builders, have commissioned several projects to inform hostellers staying above the [[HBCSL/Samoa forum Nov 6 2010|Samoa cookhouse]] (the future home of the Hostel at Samoa) about sustainability. One such project is The Buzzards’ Windbelt™  system. The Team known as The Buzzards consists of [[User:Xf1|Bob Xuesi]], [[User:Rsd26|Ryan Dunne]], [[User:Jdw83|Dustin Wiesner]], and [[User:Ddr15|Dustin Revel]]. The Buzzards were given the task to charge USB devices using a Windbelt™  or an array of Windbelts™. The Windbelt™  was invented by [http://www.humdingerwind.com/ Shawn Frayne] to provide emergency lighting in third world countries<ref>http://www.popularmechanics.com/science/energy/solar-wind/4224763</ref>. Shawn was intrigued by the principle of aero-elastic flutter and designed the Windbelt™ to convert the power generated by this principle to usable [[electricity]]. This project will inform hostellers about this technology, and demonstrate that it has real world application. The Windbelt™  is not the solution for all of our future energy challenges but it is one of the many technologies that together will someday allow us to live sustainable lives.  


[[Image:Samoa hostel.png|thumb|right|500px|Samoa Hostel]]
[[Image:Samoa hostel.png|thumb|right|500px|Samoa Hostel]]
Line 9: Line 9:
== Background  ==
== Background  ==


Danco Builders, in cooperation with the Humboldt Bay Center for Sustainable Living, is building a Hostel above the Samoa Cookhouse. The hostel will educate residents about topics related to sustainable living and will utilize several projects built by Engineering 215 students; one of these projects is a windbelt.  
Danco Builders, in cooperation with the Humboldt Bay Center for Sustainable Living, is building a Hostel above the Samoa Cookhouse. The hostel will educate residents about topics related to sustainable living and will utilize several projects built by Engineering 215 students; one of these projects is a Windbelt™.  
 
In 2004, windbelts were invented by Shawn Frayne who founded Humdinger LLC and patented the invention. A windbelt converts wind into electrical energy, like a wind turbine but uses a fluttering belt rather than spinning propellers to create electricity. The Buzzard’s double-mounted windbelt design is based on Humdinger’s “Medium” windbelt and is capable of charging USB devices brought by hostellers.
 


In 2004, Windbelts™ were invented by Shawn Frayne who founded Humdinger LLC and patented the invention. A Windbelt™  converts wind into electrical energy, like a wind turbine but uses a fluttering belt rather than spinning propellers to create electricity. The Buzzard’s double-mounted Windbelt™ design is based on [http://www.humdingerwind.com/#/wi_medium/ Humdinger’s “Medium” Windbelt™] and is capable of charging USB devices brought by hostellers.


== Problem statement  ==
== Problem statement  ==
Line 21: Line 19:
=== Criteria  ===
=== Criteria  ===


A list of criteria and constraints were developed to recognize what characteristics and abilities the windbelt must possess or not possess.  
A list of criteria and constraints were developed to recognize what characteristics and abilities the Windbelt™ must possess or not possess.  




Line 32: Line 30:
|-
|-
| Safety  
| Safety  
| The windbelt should be as safe as possible.  
| The Windbelt™ should be as safe as possible.  
| align="right" | 10
| align="right" | 10
|-
|-
| Power  
| Power  
| The more power the windbelt produces, the better.  
| The more power the Windbelt™ produces, the better.  
| align="right" | 10
| align="right" | 10
|-
|-
| Effectiveness  
| Effectiveness  
| The windbelt should be able to produce power as often as possible.  
| The Windbelt™ should be able to produce power as often as possible.  
| align="right" | 8
| align="right" | 8
|-
|-
| Build-ability  
| Build-ability  
| The windbelt should be as easy to build as possible.  
| The Windbelt™ should be as easy to build as possible.  
| align="right" | 7
| align="right" | 7
|-
|-
| Cost  
| Cost  
| The windbelt should be as inexpensive as possible.  
| The Windbelt™ should be as inexpensive as possible.  
| align="right" | 6
| align="right" | 6
|-
|-
| Durability  
| Durability  
| The windbelt should last as long as possible.  
| The Windbelt™  should last as long as possible.  
| align="right" | 6
| align="right" | 6
|-
|-
| Noise  
| Noise  
| The windbelt should make as little noise as possible.  
| The Windbelt™  should make as little noise as possible.  
| align="right" | 2
| align="right" | 2
|}
|}
Line 62: Line 60:
== Description of final project  ==
== Description of final project  ==


[[Image:CAD.png|thumb|right|400px|AutoCAD Schematic]] The final solution is two, four foot long windbelts. Each windbelt utilizes four 200 ohm coils and eight N52 Neodymium magnets. Two coils are mounted in each corner of the frame and each coil has two corresponding magnets mounted on a Mylar coated taffeta belt. The belt is attached on each end with a custom clamp mounted to a U-bolt, allowing the belt to be tensioned on either end. The frame is built out of Purpleheart, a very hard and weather resistant wood, because there is a large amount of tension exerted on the frame. With average wind, the system is expected to provide between one half to one watt of power to for charging USB devices.  
[[Image:CAD.png|thumb|right|600px|AutoCAD Schematic]] The final solution is two, four foot long Windbelts™. Each Windbelt™  utilizes four 200 ohm coils and eight N52 Neodymium magnets. Two coils are mounted in each corner of the frame and each coil has two corresponding magnets mounted on a Mylar coated taffeta belt. The belt is attached on each end with a custom clamp mounted to a U-bolt, allowing the belt to be tensioned on either end. The frame is built out of Purpleheart, a very hard and weather resistant wood, because there is a large amount of tension exerted on the frame. With average wind, the system is expected to provide between one half to one watt of power to for charging USB devices.  
 
[[Image:Coil.png|thumb|left|350px|Coil-cross sectional view]] <br><br><br><br><br><br><br><br />
 
This design will be used at the Hostel located on the second floor of the Samoa cookhouse to charge USB devices, such as cell phones, that hostellers bring. The Windbelts™ will be mounted, using satellite dish mounts, on the roof of the cookhouse facing north. A wire carries the current generated by the Windbelt™  from the roof to a female USB port mounted in the building. An ammeter is mounted above the port that displays the amount of current being delivered to the USB device.
 
<br />
<br />
 
== Assembly ==


[[Image:Coil.png|thumb|left|350px|Coil-cross sectional view]] <br><br><br><br><br><br><br><br />This design will be used at the Hostel located on the second floor of the Samoa cookhouse to charge USB devices, such as cell phones, that hostellers bring. The windbelts will be mounted, using satellite dish mounts, on the roof of the cookhouse facing north. A wire carries the current generated by the windbelt from the roof to a female USB port mounted in the building. An ammeter is mounted above the port that displays the amount of current being delivered to the USB device.
[[Image:Component.png|thumb|center|400px|Windbelt™  Components]]
The major components of one of our Windbelts™ from our MultiBelt Windbelt™  are shown. This includes the frame, tensioners, coils, magnets, and the belt.




[[Image:Tensioning.jpg|thumb|center|400px|Tensioning Apparatus ]]
Part of our tensioning system is shown. It allows the belt to be tightened and loosened.  These pictures show the first version of the system. The first version tensioned our belt based on how far we tightened the nuts along the U-bolt. However, the belt had to be attached to the U-bolt via sewing and glue. The design was modified so that the U-bolt was put into the frame from the outside, and two washers were added to each U-Bolt (as can be seen in the video below) so the belt could be clamped between two washers - keeping it from sliding and also simplifying temporary adjustments.


[[Image:assembly.jpg|thumb|center|400px|Frame Assembly]]
One of the Windbelts™ being drilled for assembly.


[[Image:WiringDiagram.PNG|thumb|center|500px|Wiring Diagram]]
The wiring diagram above shows the systems electronics from the coils (~), through the rectifiers (diamonds) to the voltage regulator.


== Cost  ==
== Cost  ==
Line 243: Line 257:
|-
|-
| Mount  
| Mount  
| satelited dish mount  
| satellite dish mount  
| 1  
| 1  
| 70  
| 70  
Line 279: Line 293:
== Testing Results  ==
== Testing Results  ==


Using a 24" circular fan, the system of two windbelts system produces .64W before the electricity is converted to DC and is regulated to 5V.  After losses incurred in these steps the output to USB devices is .4 watts.  We expect similar results at the Samoa Hostel on windy days.
Using a 24" circular fan, the system of two Windbelts™ system produces .64W before the electricity is converted to DC and is regulated to 5V.  After losses incurred in these steps the output to USB devices is .4 watts.  We expect similar results at the Samoa Hostel on windy days.
 
 
{{#widget:YouTube|id=DGyr94uSb4g}}                {{#widget:YouTube|id=DPR_eOPkcPI}}


== Discussion and next steps  ==
== Discussion and next steps  ==


Based on our research and testing we have designed the most appropriate windbelt for the Samoa Hostel climate; however, there are a few components that could be improved.  
Based on our research and testing we have designed the most appropriate Windbelt™  for the Samoa Hostel climate; however, there are a few components that could be improved.  


*First, the windbelt produces better results when precisely tuned for the wind speed it operates in. Our tensioning system does an adequate job of tuning the windbelt to the climate of the Samoa Cookhouse, but a more precise tensioning system could be used to achieve better results.  
*The Windbelt™  produces better results when precisely tuned for the wind speed it operates in. Our tensioning system does an adequate job of tuning the Windbelt™  to the climate of the Samoa Cookhouse, but a more precise tensioning system could be used to achieve better results.  
*Second, the placement of the coils also affects the reslts produced by the windbelt; the more precise the coils are mounted, the better results acieved. Although our method for mounting the coils is adequate, a more precise mounting system could be used to achieve better results.  
*The placement of the coils also affects the results produced by the Windbelt™ ; the more precise the coils are mounted, the better results achieved. Although our method for mounting the coils is adequate, a more precise mounting system could be used to achieve better results.  
*Lastly, the amount and size of magnets used on the windbelt affects the results produced by the windbelt. Our magnet stack produces adequate results with our windbelt, but with more experimentation of the relationship between magnet size, strenth, and quanitity: a more apropriate magnet stack could produce better results.
*The Windbelts™ could be mounted on a swiveling base with a rudder to make sure they are facing directly into the wind.
*The Windbelt™  will likely be easier to tune if it were shorter.  The Windbelts™ that are going to be mounted on the roof of the Samoa Cookhouse are approximately four feet long, and we would not recommend constructing a Windbelt™  that is any longer than four feet.  In fact, we would recommend making them shorter (closer to three feet).
*The amount and size of magnets used on the Windbelt™  affects the results produced by the Windbelt™ . Our magnet stack produces adequate results with our Windbelt™ , but with more experimentation of the relationship between magnet size, strength, and quantity: a more appropriate magnet stack could produce better results.


== The Buzzards  ==
== The Buzzards  ==


[[Image:Thebuzzards.jpg|thumb|right|380px|Team Logo]] [[Image:Teampicture.jpg|thumb|left|330px|Dustin Wiesner, Dustin Revel, Ryan Dunne, Bob Feng]]  
[[Image:Thebuzzards.jpg|thumb|right|380px|Team Logo]] [[Image:Teampicture.jpg|thumb|left|330px|[[User:Jdw83|Dustin Wiesner]], Dustin Revel, Ryan Dunne, Bob Feng]]  
 
<br><br><br>Humboldt State University<br><br>Engineering 215, Fall 2010<br><br>Project Manager: Lonny Grafman
 
 
 
 
 
 


<br />


Humboldt State University<br><br>Engineering 215, Fall 2010<br><br>Project Manager: Lonny Grafman


== Credits ==
The Buzzards would like to give a special thank you to the following people, and organizations for their invaluable help in planning, designing, and building our Windbelt™ .


*[http://www.humdingerwind.com/#/home/ Shawn Frayne Humdinger Wind Energy, LLC]
*Marty Reed
*[[User:Lonny|Lonny Grafman]]
*Collin Wingfield
*[http://www.customcoils.com/ Custom Coils Inc.]
*[http://www.cosmocorp.com/en/index.cfm?loc=1& Cosmo Corporation]
*Industrial Electrical Supply
*Sean Armstrong


== References  ==
== References  ==
<references/>
<references/>


[[Category:HBCSL]] [[Category:Engr215_Introduction_to_Design]] [[Category:Windbelts]]
 
[[Category:HBCSL]]  
[[Category:Engr215_Introduction_to_Design]]  
[[Category:Windbelts]]
[[Category:Videos]]
[[Category:Energy videos]]
[[Category:Engineering videos]]

Revision as of 23:30, 23 March 2013

Double-Mounted Windbelts™ made by The Buzzards.

Abstract

The Humboldt Bay Center for Sustainable Living, in cooperation with Danco Builders, have commissioned several projects to inform hostellers staying above the Samoa cookhouse (the future home of the Hostel at Samoa) about sustainability. One such project is The Buzzards’ Windbelt™ system. The Team known as The Buzzards consists of Bob Xuesi, Ryan Dunne, Dustin Wiesner, and Dustin Revel. The Buzzards were given the task to charge USB devices using a Windbelt™ or an array of Windbelts™. The Windbelt™ was invented by Shawn Frayne to provide emergency lighting in third world countries[1]. Shawn was intrigued by the principle of aero-elastic flutter and designed the Windbelt™ to convert the power generated by this principle to usable electricity. This project will inform hostellers about this technology, and demonstrate that it has real world application. The Windbelt™ is not the solution for all of our future energy challenges but it is one of the many technologies that together will someday allow us to live sustainable lives.

Samoa Hostel

Background

Danco Builders, in cooperation with the Humboldt Bay Center for Sustainable Living, is building a Hostel above the Samoa Cookhouse. The hostel will educate residents about topics related to sustainable living and will utilize several projects built by Engineering 215 students; one of these projects is a Windbelt™.

In 2004, Windbelts™ were invented by Shawn Frayne who founded Humdinger LLC and patented the invention. A Windbelt™ converts wind into electrical energy, like a wind turbine but uses a fluttering belt rather than spinning propellers to create electricity. The Buzzard’s double-mounted Windbelt™ design is based on Humdinger’s “Medium” Windbelt™ and is capable of charging USB devices brought by hostellers.

Problem statement

The objective of this project is to create an array of wind belts that will charge a cell phone as well as educate and inspire occupants of the Eco-Hostel about alternative wind energy systems.

Criteria

A list of criteria and constraints were developed to recognize what characteristics and abilities the Windbelt™ must possess or not possess.


Criteria Description Weight
Safety The Windbelt™ should be as safe as possible. 10
Power The more power the Windbelt™ produces, the better. 10
Effectiveness The Windbelt™ should be able to produce power as often as possible. 8
Build-ability The Windbelt™ should be as easy to build as possible. 7
Cost The Windbelt™ should be as inexpensive as possible. 6
Durability The Windbelt™ should last as long as possible. 6
Noise The Windbelt™ should make as little noise as possible. 2

Description of final project

AutoCAD Schematic

The final solution is two, four foot long Windbelts™. Each Windbelt™ utilizes four 200 ohm coils and eight N52 Neodymium magnets. Two coils are mounted in each corner of the frame and each coil has two corresponding magnets mounted on a Mylar coated taffeta belt. The belt is attached on each end with a custom clamp mounted to a U-bolt, allowing the belt to be tensioned on either end. The frame is built out of Purpleheart, a very hard and weather resistant wood, because there is a large amount of tension exerted on the frame. With average wind, the system is expected to provide between one half to one watt of power to for charging USB devices.

Coil-cross sectional view









This design will be used at the Hostel located on the second floor of the Samoa cookhouse to charge USB devices, such as cell phones, that hostellers bring. The Windbelts™ will be mounted, using satellite dish mounts, on the roof of the cookhouse facing north. A wire carries the current generated by the Windbelt™ from the roof to a female USB port mounted in the building. An ammeter is mounted above the port that displays the amount of current being delivered to the USB device.



Assembly

Windbelt™ Components

The major components of one of our Windbelts™ from our MultiBelt Windbelt™ are shown. This includes the frame, tensioners, coils, magnets, and the belt.


Tensioning Apparatus

Part of our tensioning system is shown. It allows the belt to be tightened and loosened. These pictures show the first version of the system. The first version tensioned our belt based on how far we tightened the nuts along the U-bolt. However, the belt had to be attached to the U-bolt via sewing and glue. The design was modified so that the U-bolt was put into the frame from the outside, and two washers were added to each U-Bolt (as can be seen in the video below) so the belt could be clamped between two washers - keeping it from sliding and also simplifying temporary adjustments.

Frame Assembly

One of the Windbelts™ being drilled for assembly.

Wiring Diagram

The wiring diagram above shows the systems electronics from the coils (~), through the rectifiers (diamonds) to the voltage regulator.

Cost

Item Description Quantity Retail Price($) Our Price($) Retail Total($) Our Total($)
Magnets 42-Assorted, w/shipping 1 42.20 42.20 42.20 42.20
Wood Per Board ft. 8 5.94 5.94 47.54 47.54
U Bolt 5/16"x2"x4.75" 1 4.13 4.13 4.13 4.13
U Bolt 5/16"x2"x4.75" 3 4.13 3.72 12.39 11.15
Gorilla Tape 2"x12yd 1 5.47 5.47 5.47 5.47
Washers 5/16" 4 0.17 0.17 0.68 0.68
Nuts 5/16" 4 0.16 0.16 0.64 0.64
Taffeta 3"x9yd 1 9 9 9 9
Coils Wrapped w/35ga 2 16 12.5 32 25
Coil Housings Assortment, w/shipping 6 0.2 0 1.2 0
Screws Wood Screws 16 0.05 0 0.8 0
Wood Glue Titebond III 16oz 1 11 0 11 0
Magnets 2 Square 2 1 1 2 2
9V Battery For multimeter 1 5.49 3.26 5.49 3.26
Plexiglass For mounting coils 8 0.2 0 1.6 0
Diodes Schottky, unspecified 4 1.94 1.94 7.74 7.74
Magnets 8xDA4-52, 8xD82-N52 1 31.08 31.08 31.08 31.08
Diodes P/N#:1N5817 Schottky 1A 20V 32 0.32 0.32 10.18 10.18
Voltage Regulator 7805 5v voltage regulator 2 1.74 1.74 3.47 3.47
Ammeter 0 to 200 mA, Part #7309Z 1 46.03 46.03 46.03 46.03
Mount satellite dish mount 1 70 5 70 5
Coil wrapped w/34 gauge 8 16 10.83 128 86.60
TOTAL 472.64 341.17
Savings: 131.47
Time spent

Testing Results

Using a 24" circular fan, the system of two Windbelts™ system produces .64W before the electricity is converted to DC and is regulated to 5V. After losses incurred in these steps the output to USB devices is .4 watts. We expect similar results at the Samoa Hostel on windy days.


Error in widget YouTube: Unable to load template 'wiki:YouTube'
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Discussion and next steps

Based on our research and testing we have designed the most appropriate Windbelt™ for the Samoa Hostel climate; however, there are a few components that could be improved.

  • The Windbelt™ produces better results when precisely tuned for the wind speed it operates in. Our tensioning system does an adequate job of tuning the Windbelt™ to the climate of the Samoa Cookhouse, but a more precise tensioning system could be used to achieve better results.
  • The placement of the coils also affects the results produced by the Windbelt™ ; the more precise the coils are mounted, the better results achieved. Although our method for mounting the coils is adequate, a more precise mounting system could be used to achieve better results.
  • The Windbelts™ could be mounted on a swiveling base with a rudder to make sure they are facing directly into the wind.
  • The Windbelt™ will likely be easier to tune if it were shorter. The Windbelts™ that are going to be mounted on the roof of the Samoa Cookhouse are approximately four feet long, and we would not recommend constructing a Windbelt™ that is any longer than four feet. In fact, we would recommend making them shorter (closer to three feet).
  • The amount and size of magnets used on the Windbelt™ affects the results produced by the Windbelt™ . Our magnet stack produces adequate results with our Windbelt™ , but with more experimentation of the relationship between magnet size, strength, and quantity: a more appropriate magnet stack could produce better results.

The Buzzards

Team Logo
Dustin Wiesner, Dustin Revel, Ryan Dunne, Bob Feng


Humboldt State University

Engineering 215, Fall 2010

Project Manager: Lonny Grafman

Credits

The Buzzards would like to give a special thank you to the following people, and organizations for their invaluable help in planning, designing, and building our Windbelt™ .

References

Cookies help us deliver our services. By using our services, you agree to our use of cookies.