(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
{{Template:ENGR215inprogress|May 15th, 2013}}
{{TOCright}}
[[File:Team superstar SCRAPHumboldt.jpg|thumb|left|300px|Team SuperStar]]
[[File:Team SuperStar poster.png|thumb|middle|375px|Project Poster]]


[[File:Team SuperStar poster.png|thumb|middle|375px]]
[[File:Team superstar SCRAPHumboldt.jpg|thumb|right|300px|]]


==Abstract==
==Abstract==
''Solar Heater and 3D Printed Molds utilizes 3-D printing capabilities and the energy produced from the Sun to heat and re-purpose crayons, candles, and other waxes. The Solar Heater is constructed out of common waste stream items and up-cycles them into a useful and interesting design whose main function is further up-cycling. This design was created in the [http://www.humboldt.edu/ Humboldt State University] [[Engr215_Introduction_to_Design|Engineering 215]], for the client, [[SCRAP Humboldt]] whose goal is to “inspire creative reuse and environmentally sustainable behavior by providing educational programs and affordable materials to the community.” <ref>[[SCRAP Humboldt]]</ref>''
''Solar Wax Melter with 3D Printed Molds utilizes 3-D printing capabilities and the energy produced from the Sun to heat and re-purpose crayons, candles, and other waxes. The Solar Wax Melter is constructed out of common waste stream items and up-cycles them into a useful and interesting design whose main function is further up-cycling. This design was created in the [http://www.humboldt.edu/ Humboldt State University] [[Engr215_Introduction_to_Design|Engineering 215]], for the client, [[SCRAP Humboldt]] whose goal is to “inspire creative reuse and environmentally sustainable behavior by providing educational programs and affordable materials to the community.” <ref>[[SCRAP Humboldt]]</ref>''


== Background ==
== Background ==
[[Engr215_Introduction_to_Design|Engineering 215]] is a design class at [[Humboldt State University]] that, each semester, partners with a local community business to improve student experience and to improve the business partner. For the 2013 Spring Semester, Engineering 215 has partnered with [[SCRAP Humboldt]], a non-profit organization that promotes creative reuse and up-cycling.
[[Engr215_Introduction_to_Design|Engineering 215]] is a design class at [[Humboldt State University]] that, each semester, partners with a local community business to improve student experience and to improve the business partner. For the 2013 Spring Semester, Engineering 215 has partnered with [[SCRAP Humboldt]], a non-profit organization that promotes creative reuse and up-cycling.
Team SuperStar's (pictured right) goal, and challenge, was to design a 3-D printed object that would add value to the waste stream. And that's what really makes the ''Solar Heater and 3D Printed Molds'' different from other designs; it utilizes [[3-D printing]]. Molds for crayons and candles were created using the 3-D design software, AutoCad.
Team SuperStar's (pictured right) goal, and challenge, was to design a 3-D printed object that would add value to the waste stream. And that's what really makes the ''Solar Wax Melter with 3D Printed Molds'' different from other designs; it utilizes [[3-D printing]]. Molds for crayons and candles were created using the 3-D design software, AutoCAD.


== Problem statement and criteria ==
== Problem statement and criteria ==
Line 44: Line 44:
|-
|-
| Materials
| Materials
| ''Greater then 75% recycled''
| ''Greater then 75% of reused material''
| 10
|-
| Safety
| ''Young children may use under close adult supervision ''
| 10
| 10
|-
|-
|}
|}


== Description of final project ==
== Description of final project ==
The ''Solar Heater and 3D Printed Molds'' encourages reuse of crayons, candles, and other waxes. The parabolic wax melter pulls common items out of the waste stream and continues to utilizes their designed/natural properties. The two main components of the design are the satellite dish, which focuses the energy from the Sun to melt the wax needed, and The 3-D molds which are designed to be unique and resemble local themes.
The ''Solar Wax Melter with 3D Printed Molds'' encourages reuse of crayons, candles, and other waxes. The solar wax melter pulls common items out of the waste stream and continues to utilizes their designed/natural properties. The two main components of the design are the satellite dish, which focuses the energy from the Sun to melt the wax needed, and The 3-D molds which are designed to be unique and resemble local themes.


{{Gallery
{{Gallery
|width=220
|width=180
|height=175
|height=150
|lines=4
|lines=2
|File:3D molds SCRAPHumboldt.png|Example of 3-D wax mold.
|File:3D molds SCRAPHumboldt.png|Example of 3-D wax mold.
|File:Parabolic heater SCRAP solar heater.jpg|Parabolic Heater- Focuses the Sun's energy to a point where the wax has been placed.
|File:Parabolic heater SCRAP solar heater.jpg|Parabolic Heater- Focuses the Sun's energy to a point where the wax has been placed.
Line 64: Line 67:
|File:Example of crayon SCRAP Solar Heater.jpg|Example of crayon/candle
|File:Example of crayon SCRAP Solar Heater.jpg|Example of crayon/candle
}}
}}
{{#widget:YouTube|id=h2ikA4qo9_I}}


== Costs ==
== Costs ==
Line 109: Line 113:


==Testing Results==
==Testing Results==
The final ''Wax Melter with 3D Molds'' product accomplishes exactly what is designed to do. It is able to transform old broken wax items into new, fresh looking products. The ''Wax Melter with 3D Molds'' completes this impressive task in a fairly reasonable amount of time (depending on the weather).
The final ''Solar Wax Melter with 3D Printed Molds'' product accomplishes exactly what is designed to do. It is able to transform old broken wax items into new, fresh looking products. The ''Solar Wax Melter with 3D Printed Molds'' completes this impressive task in a fairly reasonable amount of time (depending on the weather).
{{Gallery
{{Gallery
|width=220
|width=220
Line 160: Line 164:
==Team Members==
==Team Members==


[[User:MaryK| Mary Krieger]]
*[[User:MaryK| Mary Krieger]]
 
*[[User:Pjk87| Jenny Kunna]]
[[User:Pjk87| Jenny Kunna]]
*[[User:Josh| Josh Martinez]]
 
*[[User:Kew403| Ky Wagner]]
[[User:Josh| Josh Martinez]]
 
[[User:Kew403| Ky Wagner]]


[[Category:Engr215 Introduction to Design]]
[[Category:Engr215 Introduction to Design]]
[[Category:SCRAP Humboldt]]
[[Category:SCRAP Humboldt]]
[[Category:OSAT 3D-Printable Designs]]
[[Category:Parabolic solar cookers]]
[[Category:Upcycling]]

Revision as of 06:30, 10 May 2014

Team SuperStar
Project Poster


Abstract

Solar Wax Melter with 3D Printed Molds utilizes 3-D printing capabilities and the energy produced from the Sun to heat and re-purpose crayons, candles, and other waxes. The Solar Wax Melter is constructed out of common waste stream items and up-cycles them into a useful and interesting design whose main function is further up-cycling. This design was created in the Humboldt State University Engineering 215, for the client, SCRAP Humboldt whose goal is to “inspire creative reuse and environmentally sustainable behavior by providing educational programs and affordable materials to the community.” [1]

Background

Engineering 215 is a design class at Humboldt State University that, each semester, partners with a local community business to improve student experience and to improve the business partner. For the 2013 Spring Semester, Engineering 215 has partnered with SCRAP Humboldt, a non-profit organization that promotes creative reuse and up-cycling. Team SuperStar's (pictured right) goal, and challenge, was to design a 3-D printed object that would add value to the waste stream. And that's what really makes the Solar Wax Melter with 3D Printed Molds different from other designs; it utilizes 3-D printing. Molds for crayons and candles were created using the 3-D design software, AutoCAD.

Problem statement and criteria

There are to many common household items that are going in to the waste stream and no solutions that take advantage of 3-D printing.

Criteria Constraints Weight (1-10)
Aesthetics Does not look like trash 7
Reusability Ability to transform waste into a solution 9
Replicability Possible to replicate at home 4
Durability Able to last 6 months 1
Cost Make as least costly as possible 8
Size Be mobile 1
Materials Greater then 75% of reused material 10
Safety Young children may use under close adult supervision 10

Description of final project

The Solar Wax Melter with 3D Printed Molds encourages reuse of crayons, candles, and other waxes. The solar wax melter pulls common items out of the waste stream and continues to utilizes their designed/natural properties. The two main components of the design are the satellite dish, which focuses the energy from the Sun to melt the wax needed, and The 3-D molds which are designed to be unique and resemble local themes.

Error in widget YouTube: Unable to load template 'wiki:YouTube'

Costs

The costs of the project was extremely low due to the fact that many of the items used were donated or salvaged. However, anyone attempting to recreate this project will most likely be able to construct it for around the same price. The high price items are common in the waste stream and should be easy to obtain or have donated.

Design hours come to a total of 207
Material Retail Cost ($) Our Cost ($) Total (Retail) Total (Ours)
Satellite Dish 100.00 Donated 100.00 0.00
Assorted Sand Paper 9.22 9.22 109.22 9.22
Used Tire 20.00 Donated 129.22 9.22
Wire Hanger 0.99 Donated 130.21 9.22
3-D Printed Molds 45.00 Donated 175.21 9.22
Tin Cans 1.50 Donated 176.71 9.22
Paint 7.98 Donated 184.69 9.22
Total Cost $9.22

Testing Results

The final Solar Wax Melter with 3D Printed Molds product accomplishes exactly what is designed to do. It is able to transform old broken wax items into new, fresh looking products. The Solar Wax Melter with 3D Printed Molds completes this impressive task in a fairly reasonable amount of time (depending on the weather).

How to build

Solar Heater and 3-D Printed Molds

Discussion and next steps

The overall goal was to design something that can take items out of the waste stream and transform them into an object that can do another task. Our design not only pulls common items out of the wast stream, but it puts them to work in preventing other items from entering the waste stream. As far as application goes SCRAP Humboldt has already come up with the idea to use this design to teach children about reuse and sustainability.

References

Template:Reflist

Team Members

Cookies help us deliver our services. By using our services, you agree to our use of cookies.