The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Side view of All Book No Hands book reader.

SCRAP Humboldt is a non-profit organization that aims at educating local communities about creative and effective reuse through inventive and applicable projects. Through Cal Poly Humboldt and the Engr 215 Introduction to Design class, our group "Don't Just Scrap It" aimed at designing an effective solution for reducing the amount of binders that end up in the waste stream. The result is our device named the "All Book No Hands" which turns old binders into an effective book holder that allows you to read hands-free. We hope to see our solution exemplify reuse and upcycling in the community and how it can be effectively implemented.

Background

Poster of the All Book No Hands book reader.

SCRAP Humboldt is a creative reuse center that has access to a surplus of old binders that they wanted to find a way to reuse. Many campuses and offices have a surplus of old binders. The R.O.S.E Center at Cal Poly Humboldt is an example of a school resource center where binders can be found for free. Vinyl binders are considered to be too toxic to throw into the waste stream, so upcycling them is a useful way to reduce the quantity of binders in landfills while providing companies and individuals a way to re-purpose their unwanted binders.

Problem statement and criteria

This project must result in a product that reduces the number of binders in the waste stream.

Criteria Constraints Weight (1-10)
Cost Must be within budget. 6
Environmental Impact Only uses non-toxic materials. 5
Recycled Materials Used (%) 50% by weight. 8
Recreatability Must be possible to create at home. 7
Aesthetics Looks good enough to spark interest. 4
Longevity Expected to last at least 6 months. 6
Number of binders per project ≤10 5
Practicality Legitimately useful 10

Description of final project

Front view of All Book No Hands book reader.

The final All Book No Hands book reader is shown to the left and below. It uses string to fasten the book to the book reader, and paper clips to secure the several pages to be read. A page is turned by sliding it downwards out of one paperclip and into the other. The strings are fed through slits at the base of the top binder panel. The slits are lined with duct tape to improve durability and aesthetics. One skewer attached to a zipper piece acts as a hinged stand, which rests in a bottle cap peg. Multiple bottle caps can give different inclination options. A book light may be attached to the top of the book reader for nighttime reading.

Costs

Item Quantity Team Cost ($) Retail Cost ($)
Batteries (Sets) 3 1.00 1.00
Binders 10 Donated 2.00
Binder Pieces 6 Donated NA
Velcro Straps 2 Donated 5.00
Skewers (Pack) 1 2.99 2.99
Binder Clips 10 Donated 1.50
Scrap Wood 1 Donated 20.00
Tape 1 Donated 3.00
Paper 1 Donated 0.25
Solder & Iron 1 Donated 20.00
String 1 Donated 1.00
Weights 1 Donated 10.00
Books 1 Donated 25.00
Total $5.99 $91.74

Cost Per Book Reader

Item Quantity Team Cost ($) Retail Cost ($)
Batteries (Sets) 1 0.33 0.33
Binder 1 Donated 4.00
Velcro Straps 2 Donated 5.00
Skewers (Pack) 1 1.79 1.79
Paper Clips 2 Donated 0.20
Bottle Caps 6 Donated 0.10
Tape 1 Donated 3.00
Solder & Iron 1 Donated 20.00
Glue 1 Donated 3.00
Total $2.12 $37.42

Testing Results

Our testing results for the All Book No Hands book reader comes from direct hands on building and voluntary indirect observations of building as well as implementation. While first building the prototypes of the All Book as a group the most difficult part of building was finding a way to keep to the book open while also being easily readable. This resulted in a number of solutions but ultimately ended with Velcro straps and paper clips. However while gathering data on first time voluntary building the most difficult part was creating the slits in the binder. More explicit directions were needed in order for the slits to be cut open and the tape applied in an easy and non-confusing way. From implementation these showed that in comparison to just holding a book reading was deemed much slower. However while performing another task while also reading did allow for effective multitasking and was not comparable to reading and multitasking without a book holder. If paperclips are used to hold the pages open it takes only 2-3 seconds to turn a page. Glue was used to fasten the bottle caps to the base panel and the zipper piece to the top panel. Tape was used to fasten the skewer to the zipper piece. After a few weeks of occasional use one of the bottle caps fell off, and the skewer began to slide out of the tape. The zipper piece also came out when we tried to fix the skewer position. The glue fastenings can were then strengthened by using super glue instead of regular Elmer's glue, and by cutting small holes in the vinyl and glueing the pieces to the cardboard underneath the vinyl, instead of glueing straight onto the vinyl. Glue was also applied to the skewer-zipper connection in addition to the tape for increased durability. The book light provides adequate light, but it flickers if it is not set just right, which can be a little tricky to do.

How to build

1

Prepping the Top Panel.

2

Making it Stand.

3

Optional Book Light.

mqdefault.jpgYouTube_icon.svg
4

Attaching the Book.

5

How To Video.

mqdefault.jpgYouTube_icon.svg

Next steps

  • Implement solution into Humboldt Community.
  • Network solution into upcycling Movement.
  • Help exemplify to younger generations how used office supplies and other waste can be usefully upcycled.

Authors

Don't Just Scrap It (from left to right): Samuel Gunnerson, Jacob Burns , Dominick Triola
FA info icon.svg Angle down icon.svg Page data
Keywords upcycling gallery
Authors Dominick Triola, jake
License CC-BY-SA-3.0
Language English (en)
Related 0 subpages, 5 pages link here
Impact 303 page views
Created April 12, 2013 by jake
Modified August 22, 2023 by StandardWikitext bot
Cookies help us deliver our services. By using our services, you agree to our use of cookies.