Line 266: Line 266:
* Blind Person's Assistant [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 10:15, 27 November 2018 (PST)
* Blind Person's Assistant [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 10:15, 27 November 2018 (PST)
* [[Smart Phone Adaptive Otoscope]] [[User:Ejweiden|Ejweiden]] ([[User talk:Ejweiden|talk]]) 07:01, 15 November 2018 (PST)
* [[Smart Phone Adaptive Otoscope]] [[User:Ejweiden|Ejweiden]] ([[User talk:Ejweiden|talk]]) 07:01, 15 November 2018 (PST)
==Field Ready==
* '''Field Ready design challenges''' http://www.fieldready.org/#!d-challenges/q5g59
**[[Field Ready Design - ECG Lead Holder]] --[[User:Remichae|Remichae]] ([[User talk:Remichae|talk]]) 10:41, 10 November 2016 (PST)
**[[Field Ready Design - Nebuliser Connector]] -- [[User:Mwcurtis|Mwcurtis]] ([[User talk:Mwcurtis|talk]]) 18:40, 22 November 2016 (PST)
**[[Field Ready Design - Nebuliser]] --[[User:fordahl|Joey Fordahl]] ([[User talk:fordahl|talk]]) 12:40, 14 November 2016 (EST)
** Design Challenge #1: Dental Chair
** Design Challenge #2: ECG Limb Lead
** Design Challenge #3: Power Supply
** Design Challenge #4: Humidifier and Flowmeter
** Design Challenge #5: Infant height board
** Design Challenge #6: Nebuliser
** Design Challenge #7: Pipe T-fitting
** Design Challenge #8: Forceps/Tweezers
** Design Challenge #9: Kidney Tray


== Labs==
== Labs==

Revision as of 10:10, 22 September 2019

Winner of a the Gigabot social good contest
Error in widget YouTube: Unable to load template 'wiki:YouTube'

Open source 3-D printing of OSAT is gaining traction as groups like Re:3D (makers of the Gigabot) have sponsored contests to encourage designers to think about using 3D printers for social good, Michigan Tech sponsored the 3D printers for peace contest, the Plastic Bank, Techfortrade and the Ethical Filament Foundation are developing a new social economy for recycled 3D printer filament and Tekla Lab sponsored a contest to make open source lab equipment.

Do you have a great idea for a open-source appropriate technology that could be 3-D printed? First check out all the existing designs here. If you can not find it then click the "edit" below and post your idea. If you have an Appropedia account you can tag it with your signature --~~~~

In the Fall every year MTU will be offering a class in open-source 3-D printing. One of the assignments will be to design and prototype OSAT. 50 students use this page for ideas.

Designers if you see a request for an item you would like to work on - you can tag it with your signature --~~~~ as well and leave a message for the requester or collaborators.


To see past results go here

Requests

First check out all the existing designs here and on http://www.yeggi.com/.
  • Anything from UNICEF Supply Catalogue
  • Anything from Oxfam Equipment Catalogue
  • Shapeways drone - rescue contest http://www.shapeways.com/contests/take-flight-with-dji-and-shapeways - fire fighters and other first responders use drones, like the DJI Phantom 4, to help in search and rescue operations? With its long range and integrated camera, the DJI Phantom 4 make it a valuable tool when searching for a small body in a large body of water. Now is your opportunity to help save more lives with 3D printing. Your mission is to design accessories to be added to the DJI Phantom 4 to help make it into the ultimate rescue drone.
  • Heavy duty taps for tapstands or for buckets used for handwashing in emergency response. Talbot type taps. ** Threading set for water pipes that are used in Action Against Hunger's water provision programs
  • Community Comment Box --mcbrand
  • Bubble CPAP for premature infants [1]
  • Papa ram pump
  • The FireAnt Prototype (contact: Wayne Johnson, email: wayne.johnson@friluftslivtech.com , Friluftsliv Farm, Turtle Lake, North Dakota)

Small commercial robots designed to withstand outdoor environments currently cost over $10,000. This puts these devices out of reach for smallholder farmers with less than a hundred acres. Our goal is to drive these costs under $1,000 in successive iterations through open source designs and 3D printing. FireAnt will eventually be a 3D printable small-scale multipurpose robotic system to which one could add a variety of accessories for doing tasks around the farm. The first step is to create a rolling chassis and body to house the electronic hardware and power supplies and provide structure for the four wheels that will be driven by electric motors. It is essentially an inner box within an outer box. The outer box provides a way to attach the wheel/electric motor assembly, and store a Li-ion traction battery pack and a microcontroller that takes input from a GPS, gyroscope, and accelerometer and controls the wheel assembly motors. On top of the outer box would be a mounting plate and a mounting pattern that allows other devices such as cameras, LIDAR, robotic arms, etc. to be mounted with openings for the cables that connect these devices to its internal PC. The inner box would house a PC power supply and an internal PC (e.g. Mini-ITX PC) and other electronic equipment that the user may add. The dimensions of the outer box would be 13" W x 20" L x 10" H with a clearance of 2.5" from the ground. A wheel with tire is about 2" W x 8" H. The user should be able to easily remove the inner box to access the contents of the outer box. More details and examples will be provided on request.

  • Latrine/toilet sits or squads for children that can be used in emergency response on top of a latrine pit
  • Water testing kit parts – for example pieces found in the Delagua or Wagtech water testing kit
  • Innovative designs for a new type of Mid Upper Arm Circumference (MUAC) bracelet -see: 3-D printing open-source click-MUAC bands for identification of malnutrition -bracelet/band that measures children and classifies them as malnourished which then Action Against Hunger does treatment and prevention work for. The traditional MUAC [2] is graduated and needs to be placed at the exact middle of the left upper arm of the child. The tension of the band is adjusted by the person collecting the data. Often errors with too tight or too loose tape measurements are observed. What we are hoping to develop is a MUAC bracelet that has a standard circumference of 115 mm (the threshold for acute malnutrition in young children). The bracelet would fit on an arm with a circumference of 115 mm or less and would fasten together via a clasp mechanism (to be determined). We are looking at designs that can be produced cheaply, so the less component parts the better. Akhenry (talk) 17:48, 17 November 2015 (PST)
  • combine these two ideas : ancient method of cooling food here https://www.technologyreview.com/s/602218/improving-global-food-security-with-a-device-that-sweats/ and was reminded of this "Cooling Cure Device" http://hub.jhu.edu/2013/03/21/cooling-cure-device-infants/ for keeping preemies brains cool

OSAT needed


Tools

Food processing

Bicycle parts

existing bike hacks

cost of bicycle parts

Reindeer Husbandry Applications

* ear-tags for reindeers

  • electric fence components (e.g. insulators)
  • lasso accessory: figure eight pattern or perforated plate called also kielasta in Finnish. The accessory is used to create a noose which is set to be tightened around reindeer antler Joshua (talk) 18:13, 22 October 2015 (PDT)

Education

Agriculture/Anthropology

Health and Safety

Field Ready

Labs

Other

Cookies help us deliver our services. By using our services, you agree to our use of cookies.