We continue to develop resources related to the COVID-19 pandemic. See COVID-19 initiatives on Appropedia for more information.

Difference between revisions of "Requests for 3-D printable open source appropriate technology"

From Appropedia
Jump to navigation Jump to search
 
(239 intermediate revisions by more than 100 users not shown)
Line 23: Line 23:
 
==Requests==
 
==Requests==
 
  '''First check out all the existing designs [[:Category:OSAT_3D-Printable_Designs|here]] and on http://www.yeggi.com/.'''
 
  '''First check out all the existing designs [[:Category:OSAT_3D-Printable_Designs|here]] and on http://www.yeggi.com/.'''
* '''Field Ready design challenges''' http://www.fieldready.org/#!d-challenges/q5g59
 
**[[Field Ready Design - ECG Lead Holder]] --[[User:Remichae|Remichae]] ([[User talk:Remichae|talk]]) 10:41, 10 November 2016 (PST)
 
**[[Field Ready Design - Nebuliser Connector]] -- [[User:Mwcurtis|Mwcurtis]] ([[User talk:Mwcurtis|talk]]) 18:40, 22 November 2016 (PST)
 
**[[Field Ready Design - Nebuliser]] --[[User:fordahl|Joey Fordahl]] ([[User talk:fordahl|talk]]) 12:40, 14 November 2016 (EST)
 
 
*Anything from [https://supply.unicef.org/unicef_b2c/app/displayApp/(layout=7.0-12_1_66_67_115&carea=%24ROOT)/.do?rf=y UNICEF Supply Catalogue]
 
*Anything from [https://supply.unicef.org/unicef_b2c/app/displayApp/(layout=7.0-12_1_66_67_115&carea=%24ROOT)/.do?rf=y UNICEF Supply Catalogue]
 
* Anything from [https://www.oxfam.org.uk/equipment/catalogue Oxfam Equipment Catalogue]
 
* Anything from [https://www.oxfam.org.uk/equipment/catalogue Oxfam Equipment Catalogue]
* '''Shapeways drone - rescue contest''' http://www.shapeways.com/contests/take-flight-with-dji-and-shapeways - fire fighters and other first responders use drones, like the DJI Phantom 4, to help in search and rescue operations? With its long range and integrated camera, the DJI Phantom 4 make it a valuable tool when searching for a small body in a large body of water. Now is your opportunity to help save more lives with 3D printing. Your mission is to design accessories to be added to the DJI Phantom 4 to help make it into the ultimate rescue drone.
+
**[[Commode]] [[User:Blgregor|Blgregor]] ([[User talk:Blgregor|talk]]) 16:57, 25 November 2019 (UTC)
* Heavy duty taps for tapstands or for buckets used for handwashing in emergency response. Talbot type taps.  ** Threading set for water pipes that are used in Action Against Hunger's water provision programs  
+
 
 +
==OSAT needed==
 +
* [[Rain Water Purification and Storage]] [[User:Abhijeet|Abhijeet]] ([[User talk:Abhijeet|talk]]) 02:34, 5 December 2019 (UTC)
 +
* adjustable ream [[user:Ejumlor]][[User:Ejumlor|Ejumlor]] ([[User talk:Ejumlor|talk]]) 03:57, 1 December 2019 (UTC)
 +
* acorn sheller
 +
* [https://www.ft.com/content/9111048a-4de7-11e3-8fa5-00144feabdc0] patient moving chair (team)
 +
* cider press [https://www.tocber.com/liter-size-making--cider--4-3-cider--wine-for-gallon--apple-montima--by-press--apple-and--1-25-cider-wine--chose-grape-] (team) [[User:Marcello|Marcello]] ([[User talk:Marcello|talk]]) 23:33, 19 November 2019 (UTC), [[User:TheJLo|TheJLo]] ([[User talk:TheJLo|talk]]) 23:35, 19 November 2019 (UTC)
 +
* [[fruit crusher]] [https://www.amazon.com/Useful-UH-FC227-Apple-Crusher-Pressing/dp/B01N326UFR/ref=pd_lpo_sbs_79_img_2? [[User:Haley alexis|Haley-Alexis]] ([[User talk:Haley alexis|talk]]) 19:20, 14 November 2019 (UTC) [[User:Aesleder|Aesleder]] ([[User talk:Aesleder|talk]]) 19:29, 14 November 2019 (UTC) _encoding=UTF8&psc=1&refRID=2PKFC6WBXVKJ2NS2R6A8 ] (team)
 +
* [[Leaf Press for Leaf Protein Concentrate]] [[User:sjwentwo|Sean Wentworth]]
 +
* [[Treadle pump]] (team)
 +
* [[composting toilet]] (team)
 +
* [[Urine Diverter for Composting Toilet]] --[[User:Will Omberg|Will Omberg]] ([[User talk:Will Omberg|talk]]) 01:44, 18 November 2019 (UTC)
 +
* rescue sticks https://www.tbmarine.com/products/mustang-rescue-stick-throwable-emergency-rescue-inflatable-mrd100/
 +
* combine  these two ideas : ancient method of cooling food here https://www.technologyreview.com/s/602218/improving-global-food-security-with-a-device-that-sweats/ and was reminded of this "Cooling Cure Device" http://hub.jhu.edu/2013/03/21/cooling-cure-device-infants/ for keeping preemies brains cool
 +
* [[zero-electricity refrigerator]] -- [[User:Irbeaudo|Irbeaudo]] ([[User talk:Irbeaudo|talk]]) 02:05, 18 November 2019 (UTC)
 +
* high efficiency water pumps, spare parts
 +
* [http://www.ncbi.nlm.nih.gov/pubmed/24721602 surgical retractors simple] [http://meritoem.com/files/images/products/full/M-MR054.jpg]  [[User:Chrissy_Kaub|Chrissy_Kaub]] ([[User talk:Chrissy_Kaub|talk]]) 01:28, 30 November 2016 (EST)
 +
* surgical retractors complex [http://www.medical-supplies-equipment-company.com/files/media/images/55in-Blunt-Weitlaner-Retractor-1.jpg] [[User:Robertarden|Robertarden]] ([[User talk:Robertarden|talk]]) 06:16, 17 November 2015 (PST)
 +
* [[surgical retractors really complex]] [http://www.gadeliusmedical.com/en/products/Surgical/images/retractorsImg01.jpg] [[User:Ldgaines|Ldgaines]] ([[User talk:Ldgaines|talk]]) 19:20, 6 December 2019 (EST)
 +
* <s>[[Corn sheller]]</s>- done -- [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 16:05, 21 July 2014 (PDT)
 +
* <s>[[Open source syringe pump]]</s> - done --[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 14:20, 19 September 2014 (PDT)
 +
* [[Micro-Turbines for Water Power]][[User:Wcvenis|Wcvenis]] ([[User talk:Wcvenis|talk]]) 06:44, 17 November 2015 (PST) [[User:Cmgietek|Cmgietek]] ([[User talk:Cmgietek|talk]]) 07:00, 15 November 2018 (PST) [[Micro water turbine]]
 +
* Seed drill for efficient planting [http://www.amazon.co.uk/gp/product/B001B8Y0H4?*Version*=1&*entries*=0 Eg][[User:Jmbrooki|Jmbrooki]] ([[User talk:Jmbrooki|talk]]) 07:32, 13 November 2014 (PST)  [http://www.appropedia.org/Seed_drill Seed sowing device][[User:Ngtanike|Ngtanike]] ([[User talk:Ngtanike|talk]]) 10:02, 7 December 2015 (PST)
 +
* high efficiency small wind turbine - use [http://postimg.org/image/ufgxrryep/]
 +
* <s>[[Heliostat or Sun Tracker]]</s> ([[User talk:Heliostat or Sun Tracker|talk]]) 07:41, 18 November 2014 (PST)
 +
* umbilical cord clamps [http://makezine.com/2013/10/18/3d-printing-umbilical-cord-clamps-in-haiti/][[User:Nicolas Winkler]]
 +
* limb prostheses (see Enabling the Future) -- Foot and Leg [[User:lloxner|Levi Ox]] ([[User talk:lloxner|talk]]) 9:17, 20 November 2018 (EDT)
 +
* [[Talbot Type Water Tap]] - Heavy duty taps for tapstands or for buckets used for handwashing in emergency response. [[User:Eibauer|Eibauer]] ([[User talk:Eibauer|talk]]) 13:28, 16 November 2019 (UTC)
 +
* Threading set for water pipes that are used in Action Against Hunger's water provision programs  
 
* [[Community Comment Box]] --[[User:mcbrand|mcbrand]]
 
* [[Community Comment Box]] --[[User:mcbrand|mcbrand]]
 
* Bubble CPAP for premature infants [http://www.npr.org/sections/health-shots/2014/02/03/270962959/inexpensive-aquarium-bubbler-saves-preemies-lives]
 
* Bubble CPAP for premature infants [http://www.npr.org/sections/health-shots/2014/02/03/270962959/inexpensive-aquarium-bubbler-saves-preemies-lives]
* [[Papa ram pump]]
+
* [[Papa ram pump]] [[User:Nkbuday|Nkbuday]] ([[User talk:Nkbuday|talk]]) 22:38, 14 November 2019 (UTC)
 
* The FireAnt Prototype (contact: Wayne Johnson, email: wayne.johnson@friluftslivtech.com , Friluftsliv Farm, Turtle Lake, North Dakota)
 
* The FireAnt Prototype (contact: Wayne Johnson, email: wayne.johnson@friluftslivtech.com , Friluftsliv Farm, Turtle Lake, North Dakota)
Small commercial robots designed to withstand outdoor environments currently
+
[[User:jchamilt|jchamilt]] ([[User talk:jchamilt|talk]]) 10:51, 4 December 2019 (EST)
 +
* [[Modified cap for turning two-liter bottle into sharps disposal container]] [[User:cpwallen|cpwallen]] ([[User talk:cpwallen|talk]])
 +
* Small commercial robots designed to withstand outdoor environments currently
 
cost over $10,000. This puts these devices out of reach for smallholder farmers
 
cost over $10,000. This puts these devices out of reach for smallholder farmers
 
with less than a hundred acres. Our goal is to drive these costs under $1,000 in
 
with less than a hundred acres. Our goal is to drive these costs under $1,000 in
Line 58: Line 84:
 
* Latrine/toilet sits or squads for children that can be used in emergency response on top of a latrine pit
 
* Latrine/toilet sits or squads for children that can be used in emergency response on top of a latrine pit
 
* Water testing kit parts – for example pieces found in the Delagua or Wagtech water testing kit
 
* Water testing kit parts – for example pieces found in the Delagua or Wagtech water testing kit
*  Innovative designs for a new type of Mid Upper Arm Circumference (MUAC) bracelet --bracelet/band that measures children and classifies them as malnourished which then [[Action Against Hunger]] does treatment and prevention work for.  The traditional MUAC [http://www.alibaba.com/product-detail/MUAC-Measuring-Tape-26-5_555780882.html] is graduated and needs to be placed at the exact middle of the left upper arm of the child. The tension of the band is adjusted by the person collecting the data. Often errors with too tight or too loose tape measurements are observed. What we are hoping to develop is a MUAC bracelet that has a standard circumference of 115 mm (the threshold for acute malnutrition in young children). The bracelet would fit on an arm with a circumference of 115 mm or less and would fasten together via a clasp mechanism (to be determined). We are looking at designs that can be produced cheaply, so the less component parts the better. [[User:Akhenry|Akhenry]] ([[User talk:Akhenry|talk]]) 17:48, 17 November 2015 (PST)
+
*  Innovative designs for a new type of Mid Upper Arm Circumference (MUAC) bracelet -see: [[3-D printing open-source click-MUAC bands for identification of malnutrition  ]] -bracelet/band that measures children and classifies them as malnourished which then [[Action Against Hunger]] does treatment and prevention work for.  The traditional MUAC [http://www.alibaba.com/product-detail/MUAC-Measuring-Tape-26-5_555780882.html] is graduated and needs to be placed at the exact middle of the left upper arm of the child. The tension of the band is adjusted by the person collecting the data. Often errors with too tight or too loose tape measurements are observed. What we are hoping to develop is a MUAC bracelet that has a standard circumference of 115 mm (the threshold for acute malnutrition in young children). The bracelet would fit on an arm with a circumference of 115 mm or less and would fasten together via a clasp mechanism (to be determined). We are looking at designs that can be produced cheaply, so the less component parts the better. [[User:Akhenry|Akhenry]] ([[User talk:Akhenry|talk]]) 17:48, 17 November 2015 (PST)
* combine  these two ideas : ancient method of cooling food here https://www.technologyreview.com/s/602218/improving-global-food-security-with-a-device-that-sweats/ and was reminded of this "Cooling Cure Device" http://hub.jhu.edu/2013/03/21/cooling-cure-device-infants/ for keeping preemies brains cool
 
 
 
==OSAT needed==
 
* [http://www.ncbi.nlm.nih.gov/pubmed/24721602 surgical retractors simple] [http://meritoem.com/files/images/products/full/M-MR054.jpg]  [[User:Chrissy_Kaub|Chrissy_Kaub]] ([[User talk:Chrissy_Kaub|talk]]) 01:28, 30 November 2016 (EST)
 
* surgical retractors complex [http://www.medical-supplies-equipment-company.com/files/media/images/55in-Blunt-Weitlaner-Retractor-1.jpg] [[User:Robertarden|Robertarden]] ([[User talk:Robertarden|talk]]) 06:16, 17 November 2015 (PST)
 
* surgical retractors really complex [http://www.gadeliusmedical.com/en/products/Surgical/images/retractorsImg01.jpg]
 
* <s>[[Corn sheller]]</s>- done -- [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 16:05, 21 July 2014 (PDT)
 
* <s>[[Open source syringe pump]]</s> - done --[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 14:20, 19 September 2014 (PDT)
 
* [[Treadle pump]]
 
* [[composting toilet]]
 
* [[Micro-Turbines for Water Power]][[User:Wcvenis|Wcvenis]] ([[User talk:Wcvenis|talk]]) 06:44, 17 November 2015 (PST) [[User:Cmgietek|Cmgietek]] ([[User talk:Cmgietek|talk]]) 07:00, 15 November 2018 (PST)
 
* Seed drill for efficient planting [http://www.amazon.co.uk/gp/product/B001B8Y0H4?*Version*=1&*entries*=0 Eg][[User:Jmbrooki|Jmbrooki]] ([[User talk:Jmbrooki|talk]]) 07:32, 13 November 2014 (PST)  [http://www.appropedia.org/Seed_drill Seed sowing device][[User:Ngtanike|Ngtanike]] ([[User talk:Ngtanike|talk]]) 10:02, 7 December 2015 (PST)
 
* high efficiency small wind turbine - use [http://postimg.org/image/ufgxrryep/]
 
* <s>[[Heliostat or Sun Tracker]]</s> ([[User talk:Heliostat or Sun Tracker|talk]]) 07:41, 18 November 2014 (PST)
 
* umbilical cord clamps [http://makezine.com/2013/10/18/3d-printing-umbilical-cord-clamps-in-haiti/][[User:Nicolas Winkler]]
 
* limb prostheses (see Enabling the Future)
 
* high efficiency water pumps, spare parts
 
 
   
 
   
 
=== Tools ===
 
=== Tools ===
*[[Caliper]] --[[User:Amherbst|Amherbst]] ([[User talk:Amherbst|talk]]) 07:40, 15 November 2016 (PST)
+
*[[Seed Spreader / Salt Shaker]] [[User:Kjkurtz|Kjkurtz]]
* Straw Filter [[User:Btjoseph|Btjoseph]] ([[User talk:Btjoseph|talk]]) 07:20, 15 November 2018 (PST) [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 15 November 2018 (PST)
+
*[[Crawler Harness Holder]] [[User:Charlesz|Charlesz]] ([[User talk:Charlesz|talk]]) 00:38, 4 December 2019 (UTC)
 +
*[[Car Heater-Vent Hanger]] [[User:Erbenson|Erbenson]] ([[User talk:Erbenson|talk]])
 +
*[[Gravity Light Attachment]] [[User:Daniel Donovan|Daniel Donovan]] ([[User talk:Daniel Donovan|talk]]) 22:21, 4 December 2019 (UTC)
 +
*[[Framing Spacer]] [[User:LoganBrunette|LoganBrunette]] ([[User talk:LoganBrunette|talk]]) 08:53, 27 November 2018 (PST)
 +
*[[Field Ripper/Seeder Combo]][[User:Dofabry|Dofabry]] ([[User talk:Dofabry|talk]]) 07:27, 27 November 2018 (PST)
 +
*[[Kreg Jig]][[User:CalMcCarty|CalMcCarty]] ([[User talk:CalMcCarty|talk]]) 16:58, 27 November 2018 (PST)
 +
*[[Caliper]] --[[User:Amherbst|Amherbst]] ([[User talk:Amherbst|talk]]) 07:40, 15 November 2016 (PST) [[User:Siege|Siege]] ([[User talk:Siege|talk]]) 05:13, 28 November 2019 (UTC)
 +
*[[Straw Filter]] [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:27, 15 November 2018 (PST)
 +
* [[Water bottle filter]] [[User:Btjoseph|Btjoseph]] ([[User talk:Btjoseph|talk]]) 07:20, 15 November 2018 (PST)  
 +
*[[Monochromator]] [[User:Ajrettig|Ajrettig]] ([[User talk:Ajrettig|talk]]) [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) [[User:Ajwunder|Ajwunder]] ([[User Ajwunder|talk]]) 08:35, 4 December 2018 (PST)  
 
* [[Hand Drill]] [[User:Mikehartl|Mikehartl]] ([[User talk:Mikehartl|talk]]) 06:17, 17 November 2015 (PST)
 
* [[Hand Drill]] [[User:Mikehartl|Mikehartl]] ([[User talk:Mikehartl|talk]]) 06:17, 17 November 2015 (PST)
 
* [[Open source hoe]] -- [[User:Goliath182|Goliath182]] ([[User talk:Goliath182|talk]]) 07:42, 13 November 2014 (PST)
 
* [[Open source hoe]] -- [[User:Goliath182|Goliath182]] ([[User talk:Goliath182|talk]]) 07:42, 13 November 2014 (PST)
* [[Lightweight Wrenches]] [[User:Jcmayros|Jcmayros]] ([[User talk:Jcmayros|talk]]) 07:31, 13 November 2014 (PST)
+
* [[Lightweight Wrenches]] -- [[User:Atballou|Atballou]] ([[User talk:Atballou|talk]]) 00:32, 3 December 2019 (UTC)
 
* low force mating gears
 
* low force mating gears
 
* hinges -- [[User:D4r3llo5|D4r3llo5]] ([[User talk:D4r3llo5|talk]]) 07:45, 13 November 2014 (PST)
 
* hinges -- [[User:D4r3llo5|D4r3llo5]] ([[User talk:D4r3llo5|talk]]) 07:45, 13 November 2014 (PST)
Line 89: Line 107:
 
* Sailing Cleat Clamp [[User:Cedartree|Cedar Brumm]] ([[User talk:Cedar Brumm|talk]]) 07:30, 17 November 2015 (PST)
 
* Sailing Cleat Clamp [[User:Cedartree|Cedar Brumm]] ([[User talk:Cedar Brumm|talk]]) 07:30, 17 November 2015 (PST)
 
* [[low force snaps for easy assembly/dis-assembly of mating parts]]. [[User:Jcgerdt|Jcgerdt]] ([[User talk:Jcgerdt|talk]]) 07:42, 13 November 2014 (PST)
 
* [[low force snaps for easy assembly/dis-assembly of mating parts]]. [[User:Jcgerdt|Jcgerdt]] ([[User talk:Jcgerdt|talk]]) 07:42, 13 November 2014 (PST)
* [[Parametric quick release buckles]], similar to [http://www.thingiverse.com/thing:1416], but done in OpenSCAD and parametric. Only found 1 design that was adjustable, and that was in blender.
+
* [[Parametric quick release buckles]], similar to [http://www.thingiverse.com/thing:1416], but done in OpenSCAD and parametric. Only found 1 design that was adjustable, and that was in blender. [[User:Cmphilo|Cmphilo]] ([[User talk:Cmphilo|talk]]) 15:29, 19 November 2019 (UTC)
 
* [[Pulleys]] [[User:Lwilder|Lucas Wilder]] ([[User talk:Lwilder|talk]]) 07:36, 13 November 2014 (PST)
 
* [[Pulleys]] [[User:Lwilder|Lucas Wilder]] ([[User talk:Lwilder|talk]]) 07:36, 13 November 2014 (PST)
 
* high efficiency stove components
 
* high efficiency stove components
 
* [[Carpenter's Hammer - 16 ounce]]  [[User:Cjkmiec|Cjkmiec]] ([[User talk:Cjkmiec|talk]]) 07:32, 17 November 2015 (PST)
 
* [[Carpenter's Hammer - 16 ounce]]  [[User:Cjkmiec|Cjkmiec]] ([[User talk:Cjkmiec|talk]]) 07:32, 17 November 2015 (PST)
* thermometer (digital)
 
 
* [[blood pressure monitor]] <$20
 
* [[blood pressure monitor]] <$20
 +
* [[Momentum Fire Starter]] [[User:Cascheel|Cascheel]] ([[User talk:Cascheel|talk]]) 19:23, 4 December 2019 (UTC)
 
* [[Electronic Stethoscope]] [[User:Pnjensen|Pnjensen]] ([[User talk:Pnjensen|talk]]) 08:00, 15 November 2016 (PST)
 
* [[Electronic Stethoscope]] [[User:Pnjensen|Pnjensen]] ([[User talk:Pnjensen|talk]]) 08:00, 15 November 2016 (PST)
 
* [[stethoscope]] [https://www.youmagine.com/designs/stethoscope-chestpiece]--[[User:Bwbarker|Bwbarker]] ([[User talk:Bwbarker|talk]]) 07:45, 13 November 2014 (PST) [[User:Kev Man|Kev Man]] ([[User talk:Kev Man|talk]]) 16:35, 18 November 2015 (PST)
 
* [[stethoscope]] [https://www.youmagine.com/designs/stethoscope-chestpiece]--[[User:Bwbarker|Bwbarker]] ([[User talk:Bwbarker|talk]]) 07:45, 13 November 2014 (PST) [[User:Kev Man|Kev Man]] ([[User talk:Kev Man|talk]]) 16:35, 18 November 2015 (PST)
Line 103: Line 121:
 
* [https://www.indiegogo.com/projects/drinkpure-a-novel-water-filtration-device Water filtration devices] [[User:The Dean|The Dean]] ([[User talk:The Dean|talk]]) 11:04, 1 December 2014 (PST)
 
* [https://www.indiegogo.com/projects/drinkpure-a-novel-water-filtration-device Water filtration devices] [[User:The Dean|The Dean]] ([[User talk:The Dean|talk]]) 11:04, 1 December 2014 (PST)
 
* [https://www.indiegogo.com/projects/gravitylight-lighting-for-developing-countries  3d printable and tuneable gravity powered LED light] --[[User:JMucinski|Josh Mucinski]] --[[User:jcrisch|Johnny]]
 
* [https://www.indiegogo.com/projects/gravitylight-lighting-for-developing-countries  3d printable and tuneable gravity powered LED light] --[[User:JMucinski|Josh Mucinski]] --[[User:jcrisch|Johnny]]
* newspaper briquet maker [[User:Jwkubist|Jwkubist]] ([[User talk:Jwkubist|talk]]) 14:25, 17 November 2014 (PST)
+
* [[newspaper briquet maker]] [[User:Jwkubist|Jwkubist]] ([[User talk:Jwkubist|talk]]) 14:25, 17 November 2014 (PST)
 
* plastic bottle stripper - examples: http://www.utsumi.com.br/pet/English/filetador/index.html (particularly the bottom) and http://www.livedebris.org/Photos/Art%20photos/Tutorials/bottle%20cutter%20tutorial.pdf [[User:Kemyszka|Kemyszka]] ([[User talk:Kemyszka|talk]]) 11:06, 18 November 2014 (PST) [[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 07:31, 17 November 2015 (PST) 3D printed version (Ian Armesy)
 
* plastic bottle stripper - examples: http://www.utsumi.com.br/pet/English/filetador/index.html (particularly the bottom) and http://www.livedebris.org/Photos/Art%20photos/Tutorials/bottle%20cutter%20tutorial.pdf [[User:Kemyszka|Kemyszka]] ([[User talk:Kemyszka|talk]]) 11:06, 18 November 2014 (PST) [[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 07:31, 17 November 2015 (PST) 3D printed version (Ian Armesy)
 
* <s>Hydroponic halo ring</s> - Top feed dripping device, [[User:Mvalessi|Mvalessi]] ([[User talk:Mvalessi|talk]]) 14:23, 15 November 2014 (PST)
 
* <s>Hydroponic halo ring</s> - Top feed dripping device, [[User:Mvalessi|Mvalessi]] ([[User talk:Mvalessi|talk]]) 14:23, 15 November 2014 (PST)
 
* Chicken feed holder and drinker for small scale poultry projects [[User:Jgwamuri|Jephias Gwamuri]] ([[User talk:jgwamuri|talk]]) 17:56, 16 November 2014 (PST) [http://www.poultrycentre.co.uk/super-feeder-hopper-3kg_p22290508.htm]
 
* Chicken feed holder and drinker for small scale poultry projects [[User:Jgwamuri|Jephias Gwamuri]] ([[User talk:jgwamuri|talk]]) 17:56, 16 November 2014 (PST) [http://www.poultrycentre.co.uk/super-feeder-hopper-3kg_p22290508.htm]
* [[Simple Forestry Densiometer]] [[User:btswanso|Brian Swanson]] ([[User talk:btswanso|talk]]) 10:07, 18 November 2014 (PST)
+
* [[Simple Forestry Densiometer]] [[User:btswanso|Brian Swanson]] ([[User talk:btswanso|talk]]) 10:07, 18 November 2014 (PST)  
* [[snap together shovel]] [[User:Zmalinow|Zmalinow]] ([[User talk:Zmalinow|talk]]) 07:37, 18 November 2014 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:23, 17 November 2015 (PST)
+
* [[Updated Forestry Densiometer (Smartphone Capable)]] [[User:Rsimpson|rsimpson]] ([[User talk:rsimpson|talk]])10:35, 14 November 2019
 +
* [[snap together shovel]] [[Snap Together Snow Shovel]] [[User:Zmalinow|Zmalinow]] ([[User talk:Zmalinow|talk]]) 07:37, 18 November 2014 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:23, 17 November 2015 (PST) [[User:Brett Hulbert|Brett Hulbert]] ([[User talk:Brett Hulbert|talk]]) 19:36, 29 November 2019 (UTC)
 
*[[Ice Scrapper]] [[User:Drhannah|Drhannah]] ([[User talk:Drhannah|talk]]) 09:02, 30 November 2016 (PST)
 
*[[Ice Scrapper]] [[User:Drhannah|Drhannah]] ([[User talk:Drhannah|talk]]) 09:02, 30 November 2016 (PST)
 
*[[ Improved Ice Scrapper]] [[User:Pgilly20|Pierson]] ([[User talk:Pierson|talk]]) 08:45, Apr. 12, 2017 (PST)
 
*[[ Improved Ice Scrapper]] [[User:Pgilly20|Pierson]] ([[User talk:Pierson|talk]]) 08:45, Apr. 12, 2017 (PST)
 
* [[Rain water filter/bottler]] [[User:Jack Hicks|Jack Hicks]] ([[User talk:Jack Hicks|talk]]) 07:43, 18 November 2014 (PST)
 
* [[Rain water filter/bottler]] [[User:Jack Hicks|Jack Hicks]] ([[User talk:Jack Hicks|talk]]) 07:43, 18 November 2014 (PST)
* Sprinkler Head [[User:Jameswberry|Jameswberry]] ([[User talk:Jameswberry|talk]]) 13:21, 19 November 2014 (PST)
+
* [[Sprinkler Head]] [[User:Mayank Moon|Mayank Moon]] ([[User talk:Mayank Moon|talk]] [[User:Jameswberry|Jameswberry]] ([[User talk:Jameswberry|talk]]) 13:21, 19 November 2014 (PST)
 
* Tent Stakes [[User:TheRealSlimShady|TheRealSlimShady]] ([[User talk:TheRealSlimShady|talk]]) 19:07, 19 November 2014 (PST) [[User:Azw|Azw]] ([[User talk:Azw|talk]]) 07:10, 17 November 2015 (PST)
 
* Tent Stakes [[User:TheRealSlimShady|TheRealSlimShady]] ([[User talk:TheRealSlimShady|talk]]) 19:07, 19 November 2014 (PST) [[User:Azw|Azw]] ([[User talk:Azw|talk]]) 07:10, 17 November 2015 (PST)
 
* Improved Tent Stakes [[User:Jakerob|Jakerob]] 10:50, 15 November 2016 (PST)
 
* Improved Tent Stakes [[User:Jakerob|Jakerob]] 10:50, 15 November 2016 (PST)
Line 119: Line 138:
 
* [[Cassava (food) Press]] [[User:Bchaupt|Bchaupt]] ([[User talk:Bchaupt|talk]]) 21:03, 26 November 2014 (PST)
 
* [[Cassava (food) Press]] [[User:Bchaupt|Bchaupt]] ([[User talk:Bchaupt|talk]]) 21:03, 26 November 2014 (PST)
 
* [[Garden Hose Splitter]] [[User:sclarsen|sclarsen]] ([[User talk:sclarsen|talk]]) 12:48, 2 December 2014 (EST)
 
* [[Garden Hose Splitter]] [[User:sclarsen|sclarsen]] ([[User talk:sclarsen|talk]]) 12:48, 2 December 2014 (EST)
* [[Custom Shovel Handle]] [[User:kylar stern|Shane Clifford]]
+
* [[Custom Shovel Handle]] [[User:kylar stern|Shane Clifford]] [[User:BradleyLarson|BradleyLarson]] ([[User talk:BradleyLarson|talk]]) 09:56, 26 November 2018 (PST)
 
* Shoes [[User:Sjhelmin|Sjhelmin]] ([[User talk:Sjhelmin|talk]]) 16:55, 2 December 2014 (PST)
 
* Shoes [[User:Sjhelmin|Sjhelmin]] ([[User talk:Sjhelmin|talk]]) 16:55, 2 December 2014 (PST)
 
* [[Drop Spindle for Spinning Wool into Yarn]] [[User:Amsteele|Amsteele]] ([[User talk:Amsteele|talk]]) 06:06, 4 December 2014 (PST)
 
* [[Drop Spindle for Spinning Wool into Yarn]] [[User:Amsteele|Amsteele]] ([[User talk:Amsteele|talk]]) 06:06, 4 December 2014 (PST)
 
* 3Dponics - 3D-printable hydroponics system [https://www.3dponics.com/downloads Download 3Dponics] 3:16, 1 May, 2015 (EST)
 
* 3Dponics - 3D-printable hydroponics system [https://www.3dponics.com/downloads Download 3Dponics] 3:16, 1 May, 2015 (EST)
* hand washing station https://vimeo.com/83795806 [[User:Tjmarvin|Tjmarvin]] ([[User talk:tjmarvin|talk]]) 10:10, 15 November 2018 (PST)
+
* [[Hand Washing Station]] https://vimeo.com/83795806 [[User:Tjmarvin|Tjmarvin]] ([[User talk:tjmarvin|talk]]) 10:10, 15 November 2018 (PST)
 
* [[3D-printed Lucky Iron Totems]] - http://www.wired.com/2015/06/little-iron-chotchke-can-help-cure-big-health-issue/ [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 11:18, 19 November 2015 (PST)
 
* [[3D-printed Lucky Iron Totems]] - http://www.wired.com/2015/06/little-iron-chotchke-can-help-cure-big-health-issue/ [[User:Raclark|Raclark]] ([[User talk:Raclark|talk]]) 11:18, 19 November 2015 (PST)
 
* [[Variable Food Sifter]] [[User:Ampringl|Ampringl]] ([[User talk:Ampringl|talk]]) 18:49, 16 November 2015 (PST)
 
* [[Variable Food Sifter]] [[User:Ampringl|Ampringl]] ([[User talk:Ampringl|talk]]) 18:49, 16 November 2015 (PST)
 
* [[Fruit Picker]] [[User:jclawson|jclawson]] 10:35, 17 November 2015 (PST)
 
* [[Fruit Picker]] [[User:jclawson|jclawson]] 10:35, 17 November 2015 (PST)
* Spork Knife[[User:atketter|atketter]] 10:35, 17 November 2015 (PST) 00:31, 17 April 2017 (PDT)~
+
* Spork Knife[[User:atketter|atketter]] 10:35, 17 November 2015 (PST) 00:31, 17 April 2017 (PDT)~ ([[User talk:takrapek|Theron Krapek]]) 4:33, 20 November 2019 (PDT)
 
* The better spork knife [[User:Forest.andresen|Forest.andresen]] ([[User talk:Forest.andresen|talk]]) 06:51, 5 May 2017 (PDT)
 
* The better spork knife [[User:Forest.andresen|Forest.andresen]] ([[User talk:Forest.andresen|talk]]) 06:51, 5 May 2017 (PDT)
 
* Simple Lathe [[User:FrankBeFay|FrankBeFay]] 10:24, 19 November 2015 (PST)
 
* Simple Lathe [[User:FrankBeFay|FrankBeFay]] 10:24, 19 November 2015 (PST)
Line 133: Line 152:
 
*[[pruning hook]] [[User:Hdpowers|Hdpowers]] 07:38, 19 November 2015 (PST)
 
*[[pruning hook]] [[User:Hdpowers|Hdpowers]] 07:38, 19 November 2015 (PST)
 
*[[Concrete trowel]] [[User:ejmarsha|ejmarsha]] 09:47, 28 November 2015 (PST)
 
*[[Concrete trowel]] [[User:ejmarsha|ejmarsha]] 09:47, 28 November 2015 (PST)
 +
*[[Pointer Trowel]] [[User:Agbretz|Agbretz]] ([[User talk:Agbretz|talk]]) 02:42, 5 December 2019 (UTC)
 
* Measuring Cup [[User:Tacopaul11|Tacopaul11]] ([[User talk:Tacopaul11|talk]]) 20:16, 1 December 2015 (PST)
 
* Measuring Cup [[User:Tacopaul11|Tacopaul11]] ([[User talk:Tacopaul11|talk]]) 20:16, 1 December 2015 (PST)
* [[Fishing Pole Rod Holder]] [[User:Dmswanso|Dmswanso]] ([[User talk:Dmswanso|talk]]) 07:31, 15 November 2016 (PST)
+
* [[Fishing Pole Rod Holder]] [[User:Dmswanso|Dmswanso]] ([[User talk:Dmswanso|talk]]) 07:31, 15 November 2016 (PST), [[User:Kjkurtz|Kjkurtz]] ([[User talk:Kjkurtz|talk]]) 02:24, 19 November 2019 (UTC)
 
* Bike wheel repair tools - Tire lever and  [[Spoke wrench]] [[User:Prstlouis|Prstlouis]] ([[User talk:Prstlouis|talk]]) 19:43, 6 December 2015 (PST)
 
* Bike wheel repair tools - Tire lever and  [[Spoke wrench]] [[User:Prstlouis|Prstlouis]] ([[User talk:Prstlouis|talk]]) 19:43, 6 December 2015 (PST)
 
* [[Changeable Garden Tool Heads]] - [[User:Sklunsfo|Sklunsfo]] ([[User talk:Sklunsfo|talk]]) 14:35, 7 December 2015 (PST)
 
* [[Changeable Garden Tool Heads]] - [[User:Sklunsfo|Sklunsfo]] ([[User talk:Sklunsfo|talk]]) 14:35, 7 December 2015 (PST)
Line 145: Line 165:
 
* [[Inside Corner Trowel]] [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:45, 15 November 2016 (PST)
 
* [[Inside Corner Trowel]] [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:45, 15 November 2016 (PST)
 
*[[Garden Pruner/General Use Shears]] [http://www.appropedia.org/OSAT_MY4777_Garden_Pruner/General_Use_Shears] -  [[User:Ajensen 906|Andy Jensen]] ([[User talk:Ajensen 906|talk]]) 06:57, 15 November 2016 (PST)
 
*[[Garden Pruner/General Use Shears]] [http://www.appropedia.org/OSAT_MY4777_Garden_Pruner/General_Use_Shears] -  [[User:Ajensen 906|Andy Jensen]] ([[User talk:Ajensen 906|talk]]) 06:57, 15 November 2016 (PST)
*[[Wood Planer]] [[User:Mrhelmke|Mrhelmke]] ([[User talk:Mrhelmke|talk]]) 07:01, 15 November 2016 (PST)
+
*[[Wood Planer]] [[User:Mrhelmke|Mrhelmke]] ([[User talk:Mrhelmke|talk]]) 07:01, 15 November 2016 (PST)  
*[[Can Opener]] [http://www.appropedia.org/Can_Opener_-_3D_Printed] - [[User:Amciesla|Amciesla]] ([[User talk:Amciesla|talk]]) 07:05, 15 November 2016 (PST)
+
*[[Can Opener]] [http://www.appropedia.org/Can_Opener_-_3D_Printed] - [[User:Amciesla|Amciesla]] ([[User talk:Amciesla|talk]]) 07:05, 15 November 2016 (PST)  
* Hand Rotary Edger [[User:Stephen Krease|Stephen Krease]] ([[User talk:Stephen Krease|talk]]) 07:07, 15 November 2016 (PST)
+
* [[Hand Rotary Edger]] [[User:Stephen Krease|Stephen Krease]] ([[User talk:Stephen Krease|talk]]) 07:07, 15 November 2016 (PST)[[User:Kkoparka|Kkoparka]] ([[User talk:Kkoparka|talk]]) 20:27, 16 November 2019 (UTC)
 
* Fish Hook Extractor [[User:Emheld|Emheld]] ([[User talk:Emheld|talk]] 19:54, 6 April 2018 (PDT)~ sofia carillo)
 
* Fish Hook Extractor [[User:Emheld|Emheld]] ([[User talk:Emheld|talk]] 19:54, 6 April 2018 (PDT)~ sofia carillo)
 
* Beekeeping Jenter Rack and Plug [[User:Stephen Krease|Stephen Krease]] ([[User talk:Stephen Krease|talk]]) 07:30, 15 November 2016 (PST)
 
* Beekeeping Jenter Rack and Plug [[User:Stephen Krease|Stephen Krease]] ([[User talk:Stephen Krease|talk]]) 07:30, 15 November 2016 (PST)
 
* [[Club foot Brace for Infants]] [[User: Blsavone|Ben Savonen]] ([[User talk:Ben Savonen|talk]]) 07:37, 15 November 2016 (PST)
 
* [[Club foot Brace for Infants]] [[User: Blsavone|Ben Savonen]] ([[User talk:Ben Savonen|talk]]) 07:37, 15 November 2016 (PST)
* [[Bow and Hand Drill Set]] [[User: Jcvieau|Joe Vieau]] ([[User talk:Joe Vieau|talk]]) 10:49, 15 November 2016 (EST)
+
* [[Bow and Hand Drill Set]] [[User: Jcvieau|Joe Vieau]] ([[User talk:Joe Vieau|talk]]) 10:49, 15 November 2016 (EST)  
 
* Charcoal Pen [[User:Mackspletch|Mackspletch]] ([[User talk:Ebumba|talk]]) 10:47, 15 November 2016 (PST)
 
* Charcoal Pen [[User:Mackspletch|Mackspletch]] ([[User talk:Ebumba|talk]]) 10:47, 15 November 2016 (PST)
 
* Dust Mask Filter, [[User:Dsully567|Dsully567]] ([[User talk:Dsully567|talk]]) 07:49, 15 November 2016 (PST) 23:07, 16 April 2017 (PDT)~~
 
* Dust Mask Filter, [[User:Dsully567|Dsully567]] ([[User talk:Dsully567|talk]]) 07:49, 15 November 2016 (PST) 23:07, 16 April 2017 (PDT)~~
Line 162: Line 182:
 
* [[1/2" Drive Speed Brace]] [[User:Kerautio|Kerautio]] ([[User talk:Kerautio|talk]]) 09:11, 5 December 2016 (PST)
 
* [[1/2" Drive Speed Brace]] [[User:Kerautio|Kerautio]] ([[User talk:Kerautio|talk]]) 09:11, 5 December 2016 (PST)
 
* [[GPS Belt Clip]] [[User:vmmclain|vmmclain]] ([[User talk:vmmclain|talk]]) 04:11, 6 December 2016 (EST)
 
* [[GPS Belt Clip]] [[User:vmmclain|vmmclain]] ([[User talk:vmmclain|talk]]) 04:11, 6 December 2016 (EST)
 +
* [[Improved GPS Belt Clip]] [[User:Jbloomed|Jbloomed]] ([[User talk:Jbloomed|talk]]) 17:46, 18 November 2019 (UTC)
 
* [[Tent Vertex Joint]] [[User:jcismith|jcismith]] ([[User talk:jcismith|talk]]) 08:15, 6 December 2016 (EST)
 
* [[Tent Vertex Joint]] [[User:jcismith|jcismith]] ([[User talk:jcismith|talk]]) 08:15, 6 December 2016 (EST)
 
* [[Water bottle to sippy cup converter cap]] [[User:megandersen]] ([[User talk:megandersen]]) 10:59, 11 April 2017 (CST)
 
* [[Water bottle to sippy cup converter cap]] [[User:megandersen]] ([[User talk:megandersen]]) 10:59, 11 April 2017 (CST)
 
* [[Hand Pump Drill (Spring-Loaded)]] [[User:Limitless285]] ([[User talk:Limitless285]]) 8:15, 12 April 2017 (CST)
 
* [[Hand Pump Drill (Spring-Loaded)]] [[User:Limitless285]] ([[User talk:Limitless285]]) 8:15, 12 April 2017 (CST)
 
* [[Composite Materials Resin Mixing & Pouring Container]] [[User:TimBassler]] ([[User talk:TimBassler]]) 12:40, 23 April 2018 (PDT)
 
* [[Composite Materials Resin Mixing & Pouring Container]] [[User:TimBassler]] ([[User talk:TimBassler]]) 12:40, 23 April 2018 (PDT)
* Smart Phone Adaptive Otoscope [[User:Ejweiden|Ejweiden]] ([[User talk:Ejweiden|talk]]) 07:01, 15 November 2018 (PST)
 
 
*[[Ankle Brace Night Splint]] [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:17, 15 November 2018 (PST)
 
*[[Ankle Brace Night Splint]] [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:17, 15 November 2018 (PST)
*Dial Indicator [[User: Devon Smith]] ([[User talk:Devon Smith|talk]])
+
*[[Dial Indicator]] [[User: Devon Smith]] ([[User talk:Devon Smith|talk]])
 +
*Hand Water Pump [[User:Patrick Gilland|Patrick Gilland]] ([[User talk:Patrick Gilland|talk]]) 07:21, 27 November 2018 (PST)
 +
*[[Retractive Cooling for recyclebot]] [[User:Sasank Potluri|Sasank Potluri]] ([[User talk:Sasank Potluri|talk]]) 22:11, 15 November 2018 (PST)
 +
*Spectacles, [[User:Mayank Moon|Mayank Moon]] ([[User talk:Mayank Moon|talk]]) 07:35, 16 November 2018 (PST)
 +
*[[Chicken Feeder/Waterer w/ adapter]], [[User:Admitche|Adam Mitchell]] ([[User talk:Admitche|talk]]) 03:24, 19 November 2018 (PST)
 +
*Recyclebot Cooling Section, [[User:Alwoern|Alwoern]] ([[User talk:Alwoern|talk]]) 07:08, 27 November 2018 (PST)
 +
*[[cotton to yarn maker]] [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:34, 27 November 2018 (PST)
 +
*[[Bamboo Joints for house]] [[User:ASTrifaley|ASTrifaley]] ([[User talk:ASTrifaley|talk]]) 21:16, 5 December 2018 (PST)
 +
*[[Improved Hammer]] [[User:Jawerthm|Jawerthm]] ([[User talk:Jawerthm|talk]]) 19:16, 14 November 2019 (UTC)
 +
*[[Ground collector]], [[User:Finchers|Andy Finch]] 2019
 +
*[[Hanging Garden that Minimizes Water Use]] [[User:Oacreame|Oacreame]] ([[User talk:Oacreame|talk]]) 01:23, 5 December 2019 (UTC)
 +
* [[Tool-Free Tile Leveling System]] [[User:Swflynn|Swflynn]] ([[User talk:Swflynn|talk]]) 07:37, 5 December 2019 (UTC)
 +
*[[Manual Rotating Pea Sheller]] [[User:Nbalavich||Nbalavich]] ([[User talk:Nbalavich|talk]]) 08:51, 5 December 2019 (UTC)
 +
*[[Modular Peg Board]] [[User:Bastallw||Bastallw]] ([[User talk:Bastallw|talk]]) 08:51, 5 December 2019 (UTC)
 +
*[[Scrub Brush]] [[User:Pierce Mayville|Pierce Mayville]] ([[User talk:Pierce Mayville|talk]]) 06:55, 6 December 2019 (UTC)
  
 
==Food processing==
 
==Food processing==
* wild berry scoop picker [[User:Sswade|Sswade]] ([[User talk:Sswade|talk]]) 06:56, 15 November 2018 (PST)
+
* [[Wild Berry Scoop Picker]] [[User:Sswade|Sswade]] ([[User talk:Sswade|talk]]) 06:56, 15 November 2018 (PST) [[Fully Printable Wild Berry Scoop Picker]] [[User:Tlfedor|Tlfedor]] ([[User talk:Tlfedor|talk]]) 05:49, 20 November 2019 (UTC)
 
* higher (electric) mill throughput, while maintaining efficiency
 
* higher (electric) mill throughput, while maintaining efficiency
* identify viable winnower
+
* identify viable winnower [[User:Medley Inc|Medley Inc]]  [http://www.appropedia.org/2_Liter_Winnower#2-Liter_Winnower 2-Liter Winnower Idea]
* explore peanut milling
+
* [[Peanut Mill]] [[User:Hannah Stoll|Hannah Stoll]] ([[User talk:Hannah Stoll|talk]]) 07:10, 27 November 2018 (PST)
 
* identify viable highly-efficient cooking appliances, e.g. induction stoves, electric pressure cookers, rice cookers, etc.
 
* identify viable highly-efficient cooking appliances, e.g. induction stoves, electric pressure cookers, rice cookers, etc.
 
* more efficient deep-frying
 
* more efficient deep-frying
* [[Potato Ricer]] ~ Cole Aukee 12/1/2016
+
* [[Potato Ricer]] ~ Cole Aukee 12/1/2016  
 +
* [[Improved Potato Ricer]]  [[User:Matthew K. Makarewicz|Matthew K. Makarewicz]] ([[User talk:Matthew K. Makarewicz|talk]]) 21:40, 18 November 2019 (EST)
 
* [[Foot Operated Corn Crusher]] Andrew Houghtaling 9:56 November 15 2016 (EST)
 
* [[Foot Operated Corn Crusher]] Andrew Houghtaling 9:56 November 15 2016 (EST)
 +
* Powder maker [[User:Salils.1807|Salils.1807]] ([[User talk:Salils.1807|talk]]) 22:44, 15 November 2018 (PST)
 +
* [[Fish Cleaning Tool]] [[User:T.Billman|T.Billman]] ([[User talk:T.Billman|talk]]) 09:15, 25 November 2018 (PST)
 +
* [[Aquaponics System]] [[User:Mark Hansen|MarkHansen]] ([[User talk:Mark Hansen|talk]]) 21:35, 18 November 2019 (UTC)
 +
* [[Nut Cracker]] [[User:McPippens|McPippens]] ([[User talk:McPippens|talk]]) 13:30, 5 December 2019 (UTC)
 +
 +
==KIJENZI / HESE PRODUCT LIST==
 +
For more information contact Dr. Gershenson at hese@psu.edu
 +
 +
* Item: [[Pharmaceutical Bottle Caps]]([[User:Apboerma|Apboerma]] ([[User talk:Apboerma|talk]]) 00:52, 28 November 2019 (UTC))
 +
Requesting Department: Pharmacy
 +
Description: Pharmacists have a large variety of bottles and pill containers and it is not uncommon for them to lose the tops/caps/lids to them. They need a design for standard a cap that is either completely parameterized (and can be easily adjusted before printing) or some sort of novel design that can close any container within a certain range of mouth diameters. Most caps are threaded, but not all.
 +
 +
*Item: Pill Counter (+ optional spatula)  [[User:BlakePeters]] 21:06, 4 November 2019 (UTC)
 +
Requesting Department: Pharmacy
 +
Description: Small tray that is used by the pharmacist to be able to sort and count pills before dispensing them to a smaller container for the patient to take home. We have already made a design with some positive reviews, however it is not sufficiently durable and is not able to be printed without supports.
 +
 +
*Item: Elbow Splint  [[User:Existential-Crisis]] 11:24, 18 November 2019 (UTC)
 +
Requesting Department: Orthopedics
 +
Description: Need a design for a durable, comfortable, and parameterized model for a splint that is able to immobilize a broken/sprained elbow. If the final design requires thermoforming, that is ok, as doctors are familiar with similar processes.
 +
 +
* Item: [[Ankle Splint]]  [[User:Srschroc|Srschroc]] ([[User talk:Srschroc|talk]]) 22:34, 17 November 2019 (UTC) and [[User:Lacarste|Lacarste]] ([[User talk:Lacarste|talk]]) 23:24, 19 November 2019 (UTC)
 +
Requesting Department: Orthopedics
 +
Description: Need a design for a durable, comfortable, and parameterized model for a splint that is able to immobilize a broken/sprained ankle. If the final design requires thermoforming, that is ok, as doctors are familiar with similar processes.
 +
Photos: None
 +
 +
* Item:  [[Thumb Spike]] [[User:Travis W.|Travis W.]] ([[User talk:Travis W.|talk]]) 18:49, 20 November 2019 (UTC)
 +
Requesting Department: Orthopedics
 +
Description: Need a design for a durable, comfortable, and parameterized model for a splint that is able to immobilize a broken/sprained thumb. If the final design requires thermoforming, that is ok, as doctors are familiar with similar processes.
 +
 +
* Item: Syrup Pump/dispenser
 +
Requesting Department: Pharmacy
 +
Description: Many drugs for children are purchased in large, several gallon containers. In order to dispense drugs into smaller containers for patients to take home, pharmacists currently must carefully pour the medicinal syrups from these containers and often spill. There needs to be a better solution to this, and many doctors have requested a dispenser like those common on hand soaps.
 +
 +
* Item: [[Neck Immobilizer for Trauma]] [[User:Cmphilo|Cmphilo]] ([[User talk:Cmphilo|talk]]) 17:35, 19 November 2019 (UTC)
 +
Requesting Department: Orthopedics
 +
Description: There is a common request for a temporary device that can be used immobilizing a patient’s neck (after a traffic accident) as they are transported from one facility to another. This is not necessarily the same thing as a neck brace, which is designed for a patient to wear 24/7. NOTE: Due to safety reasons, this device will not see use by Kijenzi anytime soon. However, it is a highly requested Item, and with proper testing/certification, could be extremely useful.
 +
 +
* Item: [[Weighing scales/mass balance]] [[User:Mnveldt|Mnveldt]] ([[User talk:Mnveldt|talk]]) 20:26, 30 November 2019 (UTC)
 +
* Item: [[3-D Printable Digital Balance]] by [[User:Brhubbar|Brhubbar]] ([[User talk:Brhubbar|talk]]) 02:52, 10 December 2019 (UTC)
 +
Requesting Department: Laboratory and Pharmacy
 +
Descriptions: There is a need for an easy to use mass balance/weighing scales for use in the laboratory and pharmacy. Measurements should be in grams and the measurements be as precise as is possible (we will take as good as we can get). Zeroing feature would also be a bonus.
 +
 +
* Item: Take-home Pill Dispenser for patients  [[User:SammyKeller|SammyKeller]] ([[User talk:SammyKeller|talk]]) 20:48, 8 November 2019 (UTC)
 +
Requesting Department: Pharmacy
 +
Description: There is a need for a low-cost and quick-to-print container that can be sent home with patients. This container should be able to somehow hold daily pill or pills for up to two weeks at a time.
 +
 +
* Item: [[Fecal Sample Collection Kit]] [[User:Bubbad997|Bubbad997]] ([[User talk:Bubbad997|talk]]) 17:39, 20 November 2019 (UTC)
 +
Requesting Department: Laboratory
 +
Description: Need for an easy-to-use, compact, and discreet kit for collecting small fecal samples for laboratory testing. Needless to say, this would be a one-time use product.
 +
 +
*Item: Speculum [[User:Nsplahn|Nsplahn]] ([[User talk:Nsplahn|talk]]) 03:53, 17 November 2019 (UTC)
 +
Requesting Department: Maternal and Reproductive Health
 +
Description: This is another highly requested Item by all hospitals. They want a cheap and disposable version of a vaginal speculum, that could be quickly printed. We have one design that we have found online, but it needs to be redone. NOTE: This would be a good project for a predominantly women-led team. While this is an invasive device, and thus won’t be implemented by Kijenzi anytime soon, we have found that, for perhaps obvious reasons, all of the female doctors we have spoken with have a much more nuanced understanding of how the device needs to be improved as compared to male doctors.
 +
 +
* Item: Patella/reflex hammer [[User:Estebanrojas27]]
 +
Requesting Department: Clinical
 +
Description: Classic medical device used for testing reflexes (Typically on the knees). Durability is important.
 +
 +
*Item: Pipette accessories [[User:Smwurst|Smwurst]] ([[User talk:Smwurst|talk]]) 22:30, 25 November 2019 (UTC)
 +
Requesting Department: Laboratory
 +
Description: Need for pipette tips and holders that can fit with a variety of pipette sizes. The tips commonly crack, in part because they are not properly stored. As tips will be exposed to different chemicals, being conscientious about material selection is also important.
 +
 +
* Item: One-way valve for blood pressure cuff.
 +
Requesting Department: Clinical
 +
Description: Need a one-way valve that allows for air to be pumped into a blood pressure cuff. Required a small (often threaded) release valve so that the medical practitioners can slowly release the air.
 +
 +
* Item: Hand grip strength [[User:TheToteGoat|TheToteGoat]] ([[User talk:TheToteGoat|talk]]) 21:30, 4 November 2019 (UTC)
 +
Requesting Department: Occupational therapy
 +
Description: There is a need for a fully 3D printable Item that allows patients in physical therapy to be able to slowly work on their hand strength. Ideally allows for a resistance against each finger. If resistance is adjustable, that is even better.
 +
 +
* Item: Mucus Extractor
 +
Requesting Department: Pediatrics
 +
Description: This Items will need to be designed for flexible materials. Typical designs are a flexible bulb with a tube that allows for the removal of mucus through suction when compressing the bulb. Needless to say, this Item should also be easy to clean.
 +
 +
* Item: Stacking pins [[User:NoahStewart|NoahStewart]] ([[User talk:NoahStewart|talk]]) 22:02, 13 November 2019 (UTC)
 +
Requesting Department: Occupational Therapy
 +
Description: This is a commonly requested toy used for patients to begin building their dexterity while in physical therapy. It consists of a set of pins that can be placed into a block or board and /or stacked on top of each other.
 +
 +
* Item: Goniometer [[User:houcke|houcke]] ([[User talk:houcke|talk]]) 10:03, 2 December 2019 (UTC)
 +
Requesting Department: Occupational Therapy
 +
Description: Used to measure the angular range of motion of a limb. This includes large limbs (shoulders) and small limbs (fingers). Ideally should be, durable, easy to read, and able to measure a full 360 degrees. We do have some designs for this product, but they need improvement.
 +
 +
* Item: Sensory Stimulation Devices [[User:AbigailDeWeese]] 15:49, 4 November 2019 (UTC)
 +
Requesting Department: Occupational Therapy
 +
Description: Open ended class of several Items that consist of various textures used in physical therapy after nerve damage. Patients need to be able to feel and distinguish different textures without being in pain. Ideally this device should be both low cost, allow for multiple types of use, and quick to print to that it may be taken home by patients.
 +
 +
*[[ Item: Tools for Measuring Children’s height.]] [[User:Kmwendt|Kmwendt]] ([[User talk:Kmwendt|talk]]) 03:35, 16 November 2019 (UTC)
 +
Requesting Department: Pediatrics
 +
Description: This is another device that we have made attempts at, but will ultimately require a new design. There is a need for a consistent and easy way to measure the height of children and infants. It is okay if this device requires components that are not 3D printed, but they should be things that are widely available.
 +
 +
* [[ Item: Locking Forceps]] [[User:Kaalessi|Kaalessi]] ([[User talk:Kaalessi|talk]]) 06:05, 19 November 2019 (UTC)
 +
Requesting Department: Operating Theatre
 +
Description: There is a need for disposable, strong, and lightweight forceps that can lock shut. Ideally this design can print quickly, and allow for multiple different types of end-grip shapes and textures.
  
 
== [[Bicycle]] parts ==
 
== [[Bicycle]] parts ==
Line 195: Line 323:
 
* Bottom bracket
 
* Bottom bracket
 
* Cranks[[User:Zhinek|Zhinek]] ([[User talk:Zhinek|talk]]) 10:12, 18 November 2014 (PST)
 
* Cranks[[User:Zhinek|Zhinek]] ([[User talk:Zhinek|talk]]) 10:12, 18 November 2014 (PST)
* Pedals[[User:Rnmcfarl|Rnmcfarl]] ([[User talk:Rnmcfarl|talk]]) 07:34, 13 November 2014 (PST)
+
* [[Bike Pedals]] [[User:Mitchell DeNooyer|Mitchell DeNooyer]] ([[User talk:Mitchell DeNooyer|talk]]) 15:26, 21 November 2019 (PST)
 
* Freewheel
 
* Freewheel
 
* Spokes
 
* Spokes
Line 202: Line 330:
 
* Rim
 
* Rim
 
* Hub [[User:Dport535|David Porter]] ([[User talk:Dport535|talk]])
 
* Hub [[User:Dport535|David Porter]] ([[User talk:Dport535|talk]])
* Hub axle  
+
* Hub axle [[User:Jnbart|Jnbart]] ([[User talk:Jnbart|talk]]) 19:26, 1 December 2019 (UTC)
 
* [[3D Printed Bike Seat]] [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:16, 17 November 2015 (PST)
 
* [[3D Printed Bike Seat]] [[User:WayneHelminen|WayneHelminen]] ([[User talk:WayneHelminen|talk]]) 07:16, 17 November 2015 (PST)
* Brake set (stirrups and rods)
+
* Brake set (stirrups and rods) [[User:Behereau|Behereau]] ([[User talk:Behereau|talk]]) 15:34, 7 December 2019 (UTC)
 
* Bearings (steer tube)
 
* Bearings (steer tube)
 
* Bearings (engine, hubs)
 
* Bearings (engine, hubs)
 
* Frame tubing
 
* Frame tubing
 
* [[Handlebar grips]] [[User:Ab91|Ab91]] ([[User talk:Ab91|talk]]) 07:55, 13 November 2014 (PST) [[Improved 3D Printed Bike Grips]] [[User:Swallen|Swallen]] ([[User talk:Swallen|talk]]) 21:19, 7 December 2015 (PST) [[User:rdbutler3|rdbutler3]] ([[User talk:rdbutler3|talk]]) [[Ergonomic bike grips]][[User:Cjthormodson|Cjthormodson]] ([[User talk:Cjthormodson|talk]]) 07:10, 15 November 2018 (PST)
 
* [[Handlebar grips]] [[User:Ab91|Ab91]] ([[User talk:Ab91|talk]]) 07:55, 13 November 2014 (PST) [[Improved 3D Printed Bike Grips]] [[User:Swallen|Swallen]] ([[User talk:Swallen|talk]]) 21:19, 7 December 2015 (PST) [[User:rdbutler3|rdbutler3]] ([[User talk:rdbutler3|talk]]) [[Ergonomic bike grips]][[User:Cjthormodson|Cjthormodson]] ([[User talk:Cjthormodson|talk]]) 07:10, 15 November 2018 (PST)
* [[Bike Cargo Rack]] [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:17, 19 November 2015 (PST) [[User:Jrjarvis|Jacob Jarvis]]([[User talk:Jrjarvis|talk]]) 10:13, 15 November 2018 (EST)
+
* [[Bike Cargo Rack]] [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:17, 19 November 2015 (PST)
 
* [[7up]] [[User:Yanguo|Yan Guo]]([[User talk:Yanguo|talk]]) 07:08, 18 November 2014 (PST)
 
* [[7up]] [[User:Yanguo|Yan Guo]]([[User talk:Yanguo|talk]]) 07:08, 18 November 2014 (PST)
 
* Fork supports [[User:Kprice|Kprice]] ([[User talk:Kprice|talk]]) 07:55, 8 December 2016 (PST)
 
* Fork supports [[User:Kprice|Kprice]] ([[User talk:Kprice|talk]]) 07:55, 8 December 2016 (PST)
* Seat
+
* [[Seat]] [[User:aakruzel|aakruzel]] ([[User talk:aakruzel|talk]]) 12:23, 5 December 2019 (PST)
 
* Handlebar Plug ([[User:KirillKudaev|KirillKudaev]])
 
* Handlebar Plug ([[User:KirillKudaev|KirillKudaev]])
* Mud guard[[User:Rtgrady10|Rtgrady10]][[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:10, 17 November 2015 (PST)
+
* Mud guard [[User:Rtgrady10|Rtgrady10]][[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:10, 17 November 2015 (PST)
* Light
+
* [[Customizable Bike Light Mount]] [[User:Dwsweene|Dwsweene]] ([[User talk:Dwsweene|talk]]) 12:50, 26 November 2018 (PST)
 
* Bike Mirror [[User:Njlanter|Njlanter]] ([[User talk:Njlanter|talk]]) 17:52, 15 November 2016 (PST)
 
* Bike Mirror [[User:Njlanter|Njlanter]] ([[User talk:Njlanter|talk]]) 17:52, 15 November 2016 (PST)
 +
* [[Bike Chain Guard]] [[User:Alyssa Knoester|Alyssa Knoester]] ([[User talk:Alyssa Knoester|talk]]) 10:45 , 27 November 2018 (PST)
 
<big>[[cost of bicycle parts]]</big>
 
<big>[[cost of bicycle parts]]</big>
  
Line 237: Line 366:
 
**[[User:tdernest|Tyler Ernest]] (Snowmobile Choke Lever)
 
**[[User:tdernest|Tyler Ernest]] (Snowmobile Choke Lever)
 
**[[User:zmchenie|Zach Chenier]] (Yamaha Body Panel Quick Fastener)
 
**[[User:zmchenie|Zach Chenier]] (Yamaha Body Panel Quick Fastener)
 +
**[[User:Wes Gratz|Wes Gratz]] (Snowmobile hand guards)
 +
** Gas Can Rack [[User:Trfranck|Trfranck]] ([[User talk:Trfranck|talk]]) 19:19, 16 November 2019 (PST)
  
 
==Education==
 
==Education==
  
 
* Jump rope handles [[User:aaron.cranford]]
 
* Jump rope handles [[User:aaron.cranford]]
 +
* Shape Sorter Set as part of UNICEF Early CHildhood Development Kit [[User:Natstormm|Natstormm]] ([[User talk:Natstormm|talk]]) 21:10, 5 November 2019 (UTC)
 +
* Construction blocks as part of UNICEF Early Childhood Development Kit [[User:HJFarson|HJFarson]] ([[User talk:HJFarson|talk]]) 20:42, 13 November 2019 (UTC)
 +
* Dominoes as part of the UNICEF Early Childhood Development Kit [[User:Griff_car|Griff_car]] 15:41, 4 November 2019 (CST)
  
 
==Agriculture/Anthropology==
 
==Agriculture/Anthropology==
  
 
* Bee feeder-sugar water dispenser [[User:Thebcm27|user: Bjorn Mathisen]]
 
* Bee feeder-sugar water dispenser [[User:Thebcm27|user: Bjorn Mathisen]]
 +
* Water Dew collector [[User:Shaunakmhatre|Shaunakmhatre]] ([[User talk:Shaunakmhatre|talk]]) 15:20, 15 November 2018 (PST)
 +
* Chicken Feeder w/ Cover [[User: RachaelOstheim]]
 +
 +
==Health and Safety==
 +
* Blind Person's Assistant [[User:Aliaksei Petsiuk|Aliaksei Petsiuk]] ([[User talk:Aliaksei Petsiuk|talk]]) 10:15, 27 November 2018 (PST)
 +
* [[Smart Phone Adaptive Otoscope]] [[User:Ejweiden|Ejweiden]] ([[User talk:Ejweiden|talk]]) 07:01, 15 November 2018 (PST)
 +
* [[Daily menstrual cycle tracker]] [[User:Jjwyrzyk|Jjwyrzyk]] ([[User talk:Jjwyrzyk|talk]]) 11:05, 2 December 2019 (PST)
 +
 +
==Field Ready==
 +
* '''Field Ready design challenges''' http://www.fieldready.org/#!d-challenges/q5g59
 +
**[[Field Ready Design - ECG Lead Holder]] --[[User:Remichae|Remichae]] ([[User talk:Remichae|talk]]) 10:41, 10 November 2016 (PST)
 +
**[[Field Ready Design - Nebuliser Connector]] -- [[User:Mwcurtis|Mwcurtis]] ([[User talk:Mwcurtis|talk]]) 18:40, 22 November 2016 (PST)
 +
**[[Field Ready Design - Nebuliser]] --[[User:fordahl|Joey Fordahl]] ([[User talk:fordahl|talk]]) 12:40, 14 November 2016 (EST)
 +
** Design Challenge #1: Dental Chair
 +
** Design Challenge #2: ECG Limb Lead
 +
** Design Challenge #3: Power Supply
 +
** Design Challenge #4: Humidifier and Flowmeter
 +
** Design Challenge #5: [https://www.appropedia.org/OSAT_project_-_Infantometer Infant height board] [[User:Teshawar|Teshawar]] ([[User talk:Teshawar|talk]]) 01:17, 19 November 2019 (UTC)
 +
** Design Challenge #6: Nebuliser
 +
** Design Challenge #7: [https://www.appropedia.org/Pipe_T-fitting Pipe T-fitting] [[User:Nate.evink|Nate.evink]] ([[User talk:Nate.evink|talk]]) 21:14, 17 November 2019 (UTC)
 +
** Design Challenge #8: [[Forceps/Tweezers]]-- [[User:Pdspillm|Pdspillm]] ([[User talk:Pdspillm|talk]]) 15:25, 14 November 2019 (UTC) [[User:TheToteGoat|TheToteGoat]] ([[User talk:TheToteGoat|talk]]) 22:17, 13 November 2019 (UTC)
 +
** [[Design Challenge #9: Kidney Tray]]--[[User:Jordan Null|Jordan Null]] ([[User talk:Jordan Null|talk]]) 15:30, 14 November 2019 (UTC)
  
 
== Labs==
 
== Labs==
  
 
* PhoneLabs http://www.phonelabs.net/ converting Phones into Lab Equipment
 
* PhoneLabs http://www.phonelabs.net/ converting Phones into Lab Equipment
 +
* [[Automated Plastic Grinder/Recycler]] [[User:Michael James|Michael James]] [[User:WestonButler|WestonButler]] [[User:Jhbell|Jhbell]] ([[User talk:Jhbell|talk]]) 07:15, 27 November 2018 (PST) ([[User talk:WestonButler|talk]]) 07:13, 27 November 2018 (PST) ([[User talk:Michael James|talk]]) 07:08, 27 November 2018 (PST) 07:12, 27 November 2018 (PST)
 +
* [[CNC Lubrication and Chip Clearing System]] [[User:JBailey|JBailey]] ([[User talk:JBailey|talk]]) 07:21, 27 November 2018 (PST) [[User:Q. I. Kaspriak|Q. I. Kaspriak]] ([[User talk:Q. I. Kaspriak|talk]]) 07:23, 27 November 2018 (PST) [[User:Jrjarvis|Jrjarvis]] ([[User talk:Jrjarvis|talk]]) 08:02, 27 November 2018 (PST)
  
 
+
==Other==
 +
* http://www.hope3d.org/
 +
* '''Shapeways drone - rescue contest (over but still good to work on) ''' http://www.shapeways.com/contests/take-flight-with-dji-and-shapeways - fire fighters and other first responders use drones, like the DJI Phantom 4, to help in search and rescue operations? With its long range and integrated camera, the DJI Phantom 4 make it a valuable tool when searching for a small body in a large body of water. Now is your opportunity to help save more lives with 3D printing. Your mission is to design accessories to be added to the DJI Phantom 4 to help make it into the ultimate rescue drone.
 +
* [[Mobilization Wedge]] -- [[User:Fgaiken|Fgaiken]] ([[User talk:Fgaiken|talk]]) 23:53, 19 November 2019 (UTC)
 +
* [[Rain chain]] -- [[User:hpgetsch|hpgetsch]], 27 November 2019
 +
*[[Bowfishing Rest]] [[User:T peters|T peters]] ([[User talk:T peters|talk]]) 00:38, 4 December 2019 (UTC)
 
[[category:MOST]]
 
[[category:MOST]]
 
[[Category: Prototyping]]
 
[[Category: Prototyping]]

Latest revision as of 02:52, 10 December 2019


Sunhusky.png By Michigan Tech's Open Sustainability Technology Lab.

Wanted: Students to make a distributed future with solar-powered open-source 3-D printing.
Currently looking for PhD or MSC student interested in solar energy policy- apply now!
Contact Dr. Joshua Pearce - Apply here

MOST: Projects & Publications, Methods, Lit. reviews, People, Sponsors, News
Updates: Twitter, Instagram, YouTube

OSL.jpg


This page is part of an international project to use RepRap 3-D printing to make OSAT for sustainable development. Learn more.

Research: Open source 3-D printing of OSAT RecycleBot LCA of home recyclingGreen Distributed Recycling Ethical Filament LCA of distributed manufacturingRepRap LCA Energy and CO2 Solar-powered RepRapssolar powered recyclebot Feasibility hub Mechanical testingRepRap printing protocol: MOST‎ Lessons learnedMOST RepRap BuildMOST Prusa BuildMOST HS RepRap buildRepRap Print Server


Make me: Want to build a MOST RepRap? - Start here!Delta Build Overview:MOSTAthena Build OverviewMOST metal 3-D printer Humanitarian Crisis Response 3-D Printer



Winner of a the Gigabot social good contest

Open source 3-D printing of OSAT is gaining traction as groups like Re:3D (makers of the Gigabot) have sponsored contests to encourage designers to think about using 3D printers for social good, Michigan Tech sponsored the 3D printers for peace contest, the Plastic Bank, Techfortrade and the Ethical Filament Foundation are developing a new social economy for recycled 3D printer filament and Tekla Lab sponsored a contest to make open source lab equipment.

Do you have a great idea for a open-source appropriate technology that could be 3-D printed? First check out all the existing designs here. If you can not find it then click the "edit" below and post your idea. If you have an Appropedia account you can tag it with your signature --~~~~

In the Fall every year MTU will be offering a class in open-source 3-D printing. One of the assignments will be to design and prototype OSAT. 50 students use this page for ideas.

Designers if you see a request for an item you would like to work on - you can tag it with your signature --~~~~ as well and leave a message for the requester or collaborators.


To see past results go here

Requests[edit]

First check out all the existing designs here and on http://www.yeggi.com/.

OSAT needed[edit]

jchamilt (talk) 10:51, 4 December 2019 (EST)

cost over $10,000. This puts these devices out of reach for smallholder farmers with less than a hundred acres. Our goal is to drive these costs under $1,000 in successive iterations through open source designs and 3D printing. FireAnt will eventually be a 3D printable small-scale multipurpose robotic system to which one could add a variety of accessories for doing tasks around the farm. The first step is to create a rolling chassis and body to house the electronic hardware and power supplies and provide structure for the four wheels that will be driven by electric motors. It is essentially an inner box within an outer box. The outer box provides a way to attach the wheel/electric motor assembly, and store a Li-ion traction battery pack and a microcontroller that takes input from a GPS, gyroscope, and accelerometer and controls the wheel assembly motors. On top of the outer box would be a mounting plate and a mounting pattern that allows other devices such as cameras, LIDAR, robotic arms, etc. to be mounted with openings for the cables that connect these devices to its internal PC. The inner box would house a PC power supply and an internal PC (e.g. Mini-ITX PC) and other electronic equipment that the user may add. The dimensions of the outer box would be 13" W x 20" L x 10" H with a clearance of 2.5" from the ground. A wheel with tire is about 2" W x 8" H. The user should be able to easily remove the inner box to access the contents of the outer box. More details and examples will be provided on request.

  • Latrine/toilet sits or squads for children that can be used in emergency response on top of a latrine pit
  • Water testing kit parts – for example pieces found in the Delagua or Wagtech water testing kit
  • Innovative designs for a new type of Mid Upper Arm Circumference (MUAC) bracelet -see: 3-D printing open-source click-MUAC bands for identification of malnutrition -bracelet/band that measures children and classifies them as malnourished which then Action Against Hunger does treatment and prevention work for. The traditional MUAC [9] is graduated and needs to be placed at the exact middle of the left upper arm of the child. The tension of the band is adjusted by the person collecting the data. Often errors with too tight or too loose tape measurements are observed. What we are hoping to develop is a MUAC bracelet that has a standard circumference of 115 mm (the threshold for acute malnutrition in young children). The bracelet would fit on an arm with a circumference of 115 mm or less and would fasten together via a clasp mechanism (to be determined). We are looking at designs that can be produced cheaply, so the less component parts the better. Akhenry (talk) 17:48, 17 November 2015 (PST)

Tools[edit]

Food processing[edit]

KIJENZI / HESE PRODUCT LIST[edit]

For more information contact Dr. Gershenson at hese@psu.edu

Requesting Department: Pharmacy Description: Pharmacists have a large variety of bottles and pill containers and it is not uncommon for them to lose the tops/caps/lids to them. They need a design for standard a cap that is either completely parameterized (and can be easily adjusted before printing) or some sort of novel design that can close any container within a certain range of mouth diameters. Most caps are threaded, but not all.

  • Item: Pill Counter (+ optional spatula) User:BlakePeters 21:06, 4 November 2019 (UTC)

Requesting Department: Pharmacy Description: Small tray that is used by the pharmacist to be able to sort and count pills before dispensing them to a smaller container for the patient to take home. We have already made a design with some positive reviews, however it is not sufficiently durable and is not able to be printed without supports.

Requesting Department: Orthopedics Description: Need a design for a durable, comfortable, and parameterized model for a splint that is able to immobilize a broken/sprained elbow. If the final design requires thermoforming, that is ok, as doctors are familiar with similar processes.

Requesting Department: Orthopedics Description: Need a design for a durable, comfortable, and parameterized model for a splint that is able to immobilize a broken/sprained ankle. If the final design requires thermoforming, that is ok, as doctors are familiar with similar processes. Photos: None

Requesting Department: Orthopedics Description: Need a design for a durable, comfortable, and parameterized model for a splint that is able to immobilize a broken/sprained thumb. If the final design requires thermoforming, that is ok, as doctors are familiar with similar processes.

  • Item: Syrup Pump/dispenser

Requesting Department: Pharmacy Description: Many drugs for children are purchased in large, several gallon containers. In order to dispense drugs into smaller containers for patients to take home, pharmacists currently must carefully pour the medicinal syrups from these containers and often spill. There needs to be a better solution to this, and many doctors have requested a dispenser like those common on hand soaps.

Requesting Department: Orthopedics Description: There is a common request for a temporary device that can be used immobilizing a patient’s neck (after a traffic accident) as they are transported from one facility to another. This is not necessarily the same thing as a neck brace, which is designed for a patient to wear 24/7. NOTE: Due to safety reasons, this device will not see use by Kijenzi anytime soon. However, it is a highly requested Item, and with proper testing/certification, could be extremely useful.

Requesting Department: Laboratory and Pharmacy Descriptions: There is a need for an easy to use mass balance/weighing scales for use in the laboratory and pharmacy. Measurements should be in grams and the measurements be as precise as is possible (we will take as good as we can get). Zeroing feature would also be a bonus.

  • Item: Take-home Pill Dispenser for patients SammyKeller (talk) 20:48, 8 November 2019 (UTC)

Requesting Department: Pharmacy Description: There is a need for a low-cost and quick-to-print container that can be sent home with patients. This container should be able to somehow hold daily pill or pills for up to two weeks at a time.

Requesting Department: Laboratory Description: Need for an easy-to-use, compact, and discreet kit for collecting small fecal samples for laboratory testing. Needless to say, this would be a one-time use product.

  • Item: Speculum Nsplahn (talk) 03:53, 17 November 2019 (UTC)

Requesting Department: Maternal and Reproductive Health Description: This is another highly requested Item by all hospitals. They want a cheap and disposable version of a vaginal speculum, that could be quickly printed. We have one design that we have found online, but it needs to be redone. NOTE: This would be a good project for a predominantly women-led team. While this is an invasive device, and thus won’t be implemented by Kijenzi anytime soon, we have found that, for perhaps obvious reasons, all of the female doctors we have spoken with have a much more nuanced understanding of how the device needs to be improved as compared to male doctors.

Requesting Department: Clinical Description: Classic medical device used for testing reflexes (Typically on the knees). Durability is important.

  • Item: Pipette accessories Smwurst (talk) 22:30, 25 November 2019 (UTC)

Requesting Department: Laboratory Description: Need for pipette tips and holders that can fit with a variety of pipette sizes. The tips commonly crack, in part because they are not properly stored. As tips will be exposed to different chemicals, being conscientious about material selection is also important.

  • Item: One-way valve for blood pressure cuff.

Requesting Department: Clinical Description: Need a one-way valve that allows for air to be pumped into a blood pressure cuff. Required a small (often threaded) release valve so that the medical practitioners can slowly release the air.

Requesting Department: Occupational therapy Description: There is a need for a fully 3D printable Item that allows patients in physical therapy to be able to slowly work on their hand strength. Ideally allows for a resistance against each finger. If resistance is adjustable, that is even better.

  • Item: Mucus Extractor

Requesting Department: Pediatrics Description: This Items will need to be designed for flexible materials. Typical designs are a flexible bulb with a tube that allows for the removal of mucus through suction when compressing the bulb. Needless to say, this Item should also be easy to clean.

Requesting Department: Occupational Therapy Description: This is a commonly requested toy used for patients to begin building their dexterity while in physical therapy. It consists of a set of pins that can be placed into a block or board and /or stacked on top of each other.

  • Item: Goniometer houcke (talk) 10:03, 2 December 2019 (UTC)

Requesting Department: Occupational Therapy Description: Used to measure the angular range of motion of a limb. This includes large limbs (shoulders) and small limbs (fingers). Ideally should be, durable, easy to read, and able to measure a full 360 degrees. We do have some designs for this product, but they need improvement.

Requesting Department: Occupational Therapy Description: Open ended class of several Items that consist of various textures used in physical therapy after nerve damage. Patients need to be able to feel and distinguish different textures without being in pain. Ideally this device should be both low cost, allow for multiple types of use, and quick to print to that it may be taken home by patients.

Requesting Department: Pediatrics Description: This is another device that we have made attempts at, but will ultimately require a new design. There is a need for a consistent and easy way to measure the height of children and infants. It is okay if this device requires components that are not 3D printed, but they should be things that are widely available.

Requesting Department: Operating Theatre Description: There is a need for disposable, strong, and lightweight forceps that can lock shut. Ideally this design can print quickly, and allow for multiple different types of end-grip shapes and textures.

Bicycle parts[edit]

existing bike hacks

cost of bicycle parts

Reindeer Husbandry Applications[edit]

* ear-tags for reindeers

  • electric fence components (e.g. insulators)
  • lasso accessory: figure eight pattern or perforated plate called also kielasta in Finnish. The accessory is used to create a noose which is set to be tightened around reindeer antler Joshua (talk) 18:13, 22 October 2015 (PDT)

Education[edit]

  • Jump rope handles User:aaron.cranford
  • Shape Sorter Set as part of UNICEF Early CHildhood Development Kit Natstormm (talk) 21:10, 5 November 2019 (UTC)
  • Construction blocks as part of UNICEF Early Childhood Development Kit HJFarson (talk) 20:42, 13 November 2019 (UTC)
  • Dominoes as part of the UNICEF Early Childhood Development Kit Griff_car 15:41, 4 November 2019 (CST)

Agriculture/Anthropology[edit]

Health and Safety[edit]

Field Ready[edit]

Labs[edit]

Other[edit]