Jack Hicks (talk | contribs) |
Jack Hicks (talk | contribs) |
||
Line 3: | Line 3: | ||
Project developed by [jfhicks] | Project developed by [jfhicks] | ||
{{Statusboxtop}} | {{Statusboxtop}} | ||
{{status-prototype}} | {{status-prototype}} | ||
You can help Appropedia by contributing to the next step in this [[OSAT]]'s [[:Category:Status|status]]. | You can help Appropedia by contributing to the next step in this [[OSAT]]'s [[:Category:Status|status]]. |
Revision as of 15:21, 4 December 2014
Rain Water Bottler
Project developed by [jfhicks]
Template:Statusboxtop Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- This device collects rain water in a water bottle or any container that has standard bottle threads. It includes a purge container that collects the initial dirty rain water. The reason this water is dirty is due to the sediment that collects on a roof between rain cycles. Once the purge container is filled a ball floats to the top and closes of this container and the clean rain water is diverted into the water bottle.
- Picture of Rain Water Collector
Bill of Materials
- All compents are 3D printable but glue is needed to secure the purge main to the bottle collector and a container with standard bottle thread is need to collect clean water.
- The file used for the bottle neck threads and funnel were designed by laird can be found here [1]
- Image of Parts
- Water Collector Purge scadWater collector purge.scad
- Water Collector Purge stlWater Collector Purge .stl
- Water Purge Pipe SCADFile:Purge pipe.scad
- Water Purge Pipe STL File:Purge pipe.stl
- ScrewBall Desigend by JamieLaing and must be scaled to .55. link to source [2]
- Water collector filler.scad File:Water collector filler.scad
- Water collector filler.stl File:Water collector filler.stl
- Water collector funnel.scad File:Water collector funnel.scad
- Water collector funnel.stl File:Water collector funnel.stl