Jack Hicks (talk | contribs) (Created page with "{{777}} ==Rain Water Bottler == Project developed by [jfhicks] {{Statusboxtop}} {{status-design}} {{status-prototype}} You can help Appropedia by contributing to the next ste...") |
Jack Hicks (talk | contribs) |
||
Line 9: | Line 9: | ||
==Abstract== | ==Abstract== | ||
# This | # This device collects rain water in a water bottle or any container that has standard bottle threads. It includes a purge container that collects the initial dirty rain water. The reason this water is dirty is due to the sediment that collects on a roof between rain cycles. Once the purge container is filled a ball floats to the top and closes of this container and the clean rain water is diverted into the water bottle. | ||
# Picture of Rain Water Collector[[image:Rain water collector.jpg|500px|right]] | # Picture of Rain Water Collector[[image:Rain water collector.jpg|500px|right]] | ||
Revision as of 15:20, 4 December 2014
Rain Water Bottler
Project developed by [jfhicks]
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
- This device collects rain water in a water bottle or any container that has standard bottle threads. It includes a purge container that collects the initial dirty rain water. The reason this water is dirty is due to the sediment that collects on a roof between rain cycles. Once the purge container is filled a ball floats to the top and closes of this container and the clean rain water is diverted into the water bottle.
- Picture of Rain Water Collector
Bill of Materials
- All compents are 3D printable but glue is needed to secure the purge main to the bottle collector and a container with standard bottle thread is need to collect clean water.
- The file used for the bottle neck threads and funnel were designed by laird can be found here [1]
- Image of Parts
- Water Collector Purge scadWater collector purge.scad
- Water Collector Purge stlWater Collector Purge .stl
- Water Purge Pipe SCADFile:Purge pipe.scad
- Water Purge Pipe STL File:Purge pipe.stl
- ScrewBall Desigend by JamieLaing and must be scaled to .55. link to source [2]
- Water collector filler.scad File:Water collector filler.scad
- Water collector filler.stl File:Water collector filler.stl
- Water collector funnel.scad File:Water collector funnel.scad
- Water collector funnel.stl File:Water collector funnel.stl