Isac Bench (talk | contribs) (Created page with "{{777}} ==Quick Square == Project developed by User:Isac Bench {{Statusboxtop}} {{status-design}} {{status-prototype}} You can help Appropedia by contributing to the next...") |
Isac Bench (talk | contribs) No edit summary |
||
| (8 intermediate revisions by the same user not shown) | |||
| Line 11: | Line 11: | ||
This quick square or carpenter's triangle is a product that can be found relatively cheap at most hardware stores. This product allows the user to make lines perpendicular or 45 degrees from an existing edge. The advantage of making this 3D printable is that it is cheaper and someone who does not have access to a hardware store may be able to obtain it if they have the capabilities to 3D print. | This quick square or carpenter's triangle is a product that can be found relatively cheap at most hardware stores. This product allows the user to make lines perpendicular or 45 degrees from an existing edge. The advantage of making this 3D printable is that it is cheaper and someone who does not have access to a hardware store may be able to obtain it if they have the capabilities to 3D print. | ||
[[Image: | [[Image:Quick square print.jpg|200px]] | ||
== Bill of Materials== | == Bill of Materials== | ||
This part can be fully printed and no other components are necessary. | This part can be fully printed and no other components are necessary. | ||
[https://www.thingiverse.com/thing: | [https://www.thingiverse.com/thing:4021567 Click Here for STL and Source Code] | ||
== Tools needed for fabrication of the OSAT== | == Tools needed for fabrication of the OSAT== | ||
| Line 23: | Line 23: | ||
== Skills and Knowledge Necessary to Make the OSAT == | == Skills and Knowledge Necessary to Make the OSAT == | ||
None | |||
== Technical Specifications and Assembly Instructions== | == Technical Specifications and Assembly Instructions== | ||
| Line 30: | Line 30: | ||
Example orientaion below: | Example orientaion below: | ||
[[Image:Quick square print orientation.JPG|200px]] | |||
| Line 54: | Line 50: | ||
Material: PLA | Material: PLA | ||
== Cost savings== | == Cost savings== | ||
Revision as of 19:30, 4 December 2019
Quick Square
Project developed by User:Isac Bench
Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Abstract
This quick square or carpenter's triangle is a product that can be found relatively cheap at most hardware stores. This product allows the user to make lines perpendicular or 45 degrees from an existing edge. The advantage of making this 3D printable is that it is cheaper and someone who does not have access to a hardware store may be able to obtain it if they have the capabilities to 3D print.
Bill of Materials
This part can be fully printed and no other components are necessary.
Click Here for STL and Source Code
Tools needed for fabrication of the OSAT
- MOST Delta RepRap or similar RepRap 3-D printer
Skills and Knowledge Necessary to Make the OSAT
None
Technical Specifications and Assembly Instructions
Place flat surface on bed and no support material will be needed.
Example orientaion below:
Printing / Slicing Settings
Temperature: 210C
Infill: 15%
Supports: No
Skirt: No
Speeds: Print: 90 mm/s, Wall Speed: 70 mm/s
Layer Height: 0.20 mm
Material: PLA
Cost savings
Estimated Cost in PLA: $0.58
Commercial Equivalent: Many varieties of commercial products here is a standard option [1]
Commercial equivalent for approx $10
3D Printed for $0.58
Cost Savings ~ $9.42
% Cost Savings ~ 94% Savings
Benefited Internet Communities
Woodworking Talk [2]
DIY Chatroom [3]
The Woodworking Patriot [4]
References
Carpenters Tools Websites