The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Queen's Applied Sustainability Research Group Paper Writing Protocol

  1. First do a detailed literature review of your topic – this is the foundation – it must be complete so that you can be sure that you are contributing to the field – see How to do a Lit search
  2. After literature review choose an experiment and/or theory development/analysis which will contribute to the field and do it with Dr. Pearce's help.
  3. When experiment/theoretical work is complete and you have results worth sharing begin to write the paper - Do not use docx or xlsm formatting. Use Open Office to avoid any problems with journal formatting as Open Office can save in any format.
  4. Choose a journal that best fits your topic and the magnitude of your contribution to the field in collaboration with Dr. Pearce.
  5. Make outline approximately 1 page long that includes what you think the major figures will be and a link to your chosen journal
  6. Dr. Pearce details the outline, put it into partial journal format, and highlight notes. Highlights stay until final draft. The red-notes are about journal, and yellow -notes to each other/selves (ex. Abstract length, etc). Dr. Pearce will also add the groups past work that you should reference – will be highlighted in grey. Any text (every sentence) taken from previous writing must be edited to avoid self plagiarism and must be cited. Always acquire (often through Q-share) the original sources, read them and cite them – do NOT cite secondary sources.
  7. Write as complete a paper as possible by filling in outline. Leave outline text – highlighted yellow for removal. Use parenthetical notation for references even if your journal calls for numbers. These can be replaced later. Do not use hyperlinking within document since IEEE can not handle it yet – along with other publishers. Do not link figures or tables either – use Table # instead and will fill in at end. Highlight refs if the journal does not use parenthetical documentation and fig/table numbers.Before sending article ensure that every sentence is supported by one of the three methods below: 1. Supported by the best peer-reviewed literature available (sometime government documents or other sources are acceptable – but generally it must be in an academic peer-reviewed journal). 2. Supported by logic and previous statements in the article. 3. Supported by your own work – whether it be your experiment or analysis. Make the method you used to arrive at conclusions from your work transparent.
  8. Dr. Pearce will review with Changes recorded and send back to you. Read through the new version with Changes visible. Accept all changes unless there is a problem. Turn on record Changes for any work you do. If you disagree with a change – copy text into a comment bracket. Comments will be inserted in {}, not in comment feature. Address ALL of these comments before sending back to Dr. Pearce. Any edits you make to the article must have Track Changes on – unless they are formatting changes such as in a Table. NAME AS NEW VERSION EVERY TIME SOMEONE NEW EDITS IT. For multi-party groups, when it is bouncing back and forth between fellow students, CONTINUE TO FOLLOW THESE RULES – two students act as one unit. Never have more than one person editing the same document as authors at the same time.
  9. Repeat previous step until all co-authors are happy with article.
  10. Internal and friendly reviews. Have non-coauthors closest to the particular field of the paper review it. Ask them to shred it and find mistakes. Sometimes it is best to have different people attack specific things within your paper (e.g. logic, a particular type of analysis, etc.).Ask them not to use track changes – but instead use the comment feature. You can send your paper to several friendly reviewers simultaneously.
  11. All useful comments from internal reviewers will be taken into original document WITH CHANGES RECORDED. Update table, figure, references. Re-read requirements and make sure we comply on all counts. Ex. Word counts, keywords, etc. Send to Dr. Pearce for final approval.
  12. After approved – prepare article for submission. Following technical directions is key! Print out requirements and go through and check off each one to ensure compliance. Format of both text, tables and figures (How to make a figure to publish) must be exactly as requested by the journal. Make sure enough dpi, etc. Put references in final formatting if required.
  13. Dr. Pearce writes cover letter and sends to journal.
  14. Get published and become a high-caliber academic, go on to save the world.
FA info icon.svg Angle down icon.svg Page data
Authors Joshua M. Pearce
License CC-BY-SA-3.0
Language English (en)
Related 0 subpages, 1 pages link here
Impact 260 page views
Created November 29, 2009 by Joshua M. Pearce
Modified February 6, 2023 by Felipe Schenone
Cookies help us deliver our services. By using our services, you agree to our use of cookies.