Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Prusa SL1 Resin Funnel

From Appropedia
Jump to navigation Jump to search

Project developed by Erica Umlor


The goal of this project is to make a funnel that for pouring used resin back into the bottle. There is a space for a filter to be inserted as well since there are sometimes chunks in used resin. This funnel is modeled after the funnel that came with the Prusa SL1 printer. It will be used in the OSHE lab at Michigan Tech. There is a funnel stand as well so the chance of getting resin on your hands decreases.

Bill Of Materials

Part Price Quantity
Digital Weight Sensor $16.95 1

Tools Needed

  1. MOST Delta RepRap or similar RepRap 3-D printer

Technical Specifications and Assembly Instructions

Fig 1: Scale Housing.  
Fig 2: Square Measurement Plate.  
[[File:|center|border|135x180px|alt=|Fig 3: Housing with Electronics Mounted. ]]
Fig 3: Housing with Electronics Mounted.  
[[File:|center|border|135x180px|alt=|Fig 4: Display of Price and Weight of Print. ]]
Fig 4: Display of Price and Weight of Print.  

Cost Savings

  1. Cost to print: ~ $0.34 in filament
  2. [add link to actual]

Benefited Communities