Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Prusa SL1 Resin Funnel"

From Appropedia
Jump to: navigation, search
(Project)
Line 43: Line 43:
  
 
== Project ==  
 
== Project ==  
 
+
All .stl and .scad files are in posted on both of these sites:
 
[[https://3dprint.nih.gov/discover/3DPX-012300 NIH]]
 
[[https://3dprint.nih.gov/discover/3DPX-012300 NIH]]
 
[[https://www.thingiverse.com/thing:3960460 Thingiverse]]
 
[[https://www.thingiverse.com/thing:3960460 Thingiverse]]

Revision as of 14:59, 7 November 2019

Project developed by Erica Umlor

Abstract

The goal of this project is to make a funnel that for pouring used resin back into the bottle. There is a space for a filter to be inserted as well since there are sometimes chunks in used resin. This funnel is modeled after the funnel that came with the Prusa SL1 printer. It will be used in the OSHE lab at Michigan Tech. There is a funnel stand as well so the chance of getting resin on your hands decreases. There are two types of funnels. The one is completely round and the other has several straight edges. This is because my Athena printer doesn't handle completely round edges great. The funnel stand hasn't been printed since it was a last minute extra thought. All .scad files and .stl files are uploaded on thingiverse and nih. The links can be found below.

Bill Of Materials

Part Price Quantity
Any 3D Filament $15.00 - $20.00 1

Tools Needed

  1. MOST Delta RepRap or other 3-D printer

Technical Specifications and Assembly Instructions

Design
Fig 1: Funnel  
Fig 2: FunnelMod  
Fig 3: Funnel Holder Top  
Fig 4: Funnel Holder Bottom  
Fig 5: Funnel Holder Poles  

Cost Savings

  1. Cost to print: ~ $0.34 in filament
  2. Retail in Polland ~ $0.91 not including shipping

Benefited Communities

Project

All .stl and .scad files are in posted on both of these sites: [NIH] [Thingiverse]