Prusa SL1 Resin Funnel: Difference between revisions

Revision as of 00:26, 7 November 2019

Project developed by Erica Umlor

Abstract

The goal of this project is to make a funnel that for pouring used resin back into the bottle. There is a space for a filter to be inserted as well since there are sometimes chunks in used resin. This funnel is modeled after the funnel that came with the Prusa SL1 printer. It will be used in the OSHE lab at Michigan Tech. There is a funnel stand as well so the chance of getting resin on your hands decreases.

Bill Of Materials

Part	Price	Quantity
Any 3D Filament	$15.00 - $20.00	1

Tools Needed

MOST Delta RepRap or other 3-D printer

Technical Specifications and Assembly Instructions

Cost Savings

Cost to print: ~ $0.34 in PLA filament
[add link to actual]

Benefited Communities

OSHE: [1]

Project

[NIH] [Thingiverse]

@@ Line 11: / Line 11: @@
 ! Quantity
 |-
-| [https://www.dfrobot.com/product-1031.html Digital Weight Sensor]
+| [https://www.amazon.com/s?k=3d+filament&ref=nb_sb_noss_2 Any 3D Filament]
-| $16.95
+| $15.00 - $20.00
 | 1
 |-
 |}
 == Tools Needed ==
-# [[Athena Build Overview| MOST Delta RepRap]] or similar RepRap 3-D printer
+# [[Athena Build Overview| MOST Delta RepRap]] or other 3-D printer
 == Technical Specifications and Assembly Instructions ==
@@ Line 27: / Line 28: @@
 |lines=4
 |align=center
-|File:OSH_Mat_Scale_Housing.jpg|Fig 1: Scale Housing.
+|File:|Fig 1: Funnel
-|File:OSH_Mat_Scale_Plate.jpg|Fig 2: Square Measurement Plate.
+|File:|Fig 2: Funnel Holder Top
-|File:|Fig 3: Housing with Electronics Mounted.
+|File:|Fig 3: Funnel Holder Bottom
-|File:|Fig 4: Display of Price and Weight of Print.
+|File:|Fig 4: Funnel Holder Poles
 }}
 == Cost Savings ==
-# Cost to print: ~ $0.34 in filament
+# Cost to print: ~ $0.34 in PLA filament
 # [add link to actual]
@@ Line 43: / Line 44: @@
 [[https://3dprint.nih.gov/discover/3DPX-012300 NIH]]
+[[https://www.thingiverse.com/thing:3960460 Thingiverse]]