Property:Has description

From Appropedia
Jump to navigation Jump to search

This is a property of type Text.

Showing 50 pages using this property.
1
The purpose of this tool is to quickly remove fasteners after they have been broken loose using a breaker bar or ratchet. This tool is meant to be used with 1/2" drive sockets.  +
A pill holder to hold daily pills for up to 14 days  +
2
Winnowing is a process to remove lighter particles of chaff, dirt, etc from grain and other products typically by throwing it into the air and blowing air on it.  +
3
This OSAT is a digital mass balance with two outputs: Digital output for data logging capabilities, and an LCD display.  +
This page contains the instructions and files necessary to 3D-print a loudspeaker.  +
A customizable open-source PV racking concept is designed, prototyped for three types of modules, constructed into systems, and outdoor tested under extreme conditions for one year. An economic analysis is provided along with a technical evaluation of the system.  +
A low-cost 3-D printable open source dual axis gimbal system is presented in this study. An Arduino based microcontroller is used to move the sample holder to the user specified angle where two stepper motors control the motion providing two degrees of freedom.  +
In order to ensure appropriate spacing and well oriented array these open-source photovoltaic spacers can be printed. The design has been created to be parametric in OpenSCAD so this design can be used for any conventional array.  +
This is a solar charger or an emergency light. It runs on a 6660 mAh battery.  +
An effective method for the diagnosis of severe acute malnutrition is the measurement of the middle upper arm circumference (MUAC).  +
This speculum takes a different design that current production models to eliminate the need for pivot hardware or large joints. The open jaw design allows for greater operating and inspection area.  +
The goal of the 3D-printable cider press is to provide an affordable means of efficiently pressing cider. With scaled-up designs, the press can be used to produce enough product to sell excess not used for subsistence.  +
Goniometers are simple devices used to measure the angular range of motion of human limbs. A 3D printed goniometer can be more durable than a commercial one. With the 3D printed version being so extremely cheap, patients can be provided their own goniometers to monitor their own range of motion, thus reducing expensive doctor's visits.  +
Small Bike seat and seat post that can be used to replace an original bike seat.  +
Carpenter knife  +
Print Out Custom T-Shirts at your Home right from your Desk with an Amazing 3D Printer!  +
This project was to replicate the already produced gravity light into the 3D Printed and open source world.  +
An otoscope is simple device used in the diagnosis of ear, nose, and throat diseases.  +
Open source design files provided for 3D printing of open-toed shoes. It is estimated that two billion people worldwide are currently plagued with parasitic diseases that could be prevented by wearing proper footwear.  +
One inexpensive way to add iron to a person's diet is to boil water for cooking with a lump of iron for 10 minutes before adding any food. Lucky iron totems composition must be monitored to ensure that toxic levels of elements are not going to be absorbed by the food cooked in the boiled water.  +
3D printable prosthetic foot design  +
5
Step by step instructions for how to build a solar water condenser out of a large drum/barrel. Also has step by step instructions for how to build a solar water condenser that is left unattended for extended periods of time.  +
7
Bicycle part  +
A
This article provides a detailed how to for construction and use of this bailer as well has some design. A discussion on the application of this system and its bales is also included as well as a brief introduction to alternative machines.  +
The goal of this project is create a safer way to smash and shell acorns  +
This 2 inch wafer dipper is designed to fit into a 250 ml Schott Duran beaker. Number of wafers that can be fitted are automatically calculated and taken into account. The user needs to think only the size of his or her beaker and ofcourse the wafer dimensions.  +
The task is to adapt a widely available thermostatic valve for use in the solar water pasteurizer. The thermostatic valve that will be used comes from the coolant system in automobiles.  +
This OSAT makes biking safer by providing a cheap, easy, adjustable way to mount a mirror to the handlebars of a bicycle.  +
An adjustable heated bed that we could adjust to heat only the parts that we want to print on. (limit use of power to what is needed)  +
This is a twisted tent stake designed for use in more challenging soil types.  +
Plasmonic light trapping technology increases the ability and effectiveness of a thin film solar cell to absorp more light and light from a larger spectrum. Article includes links to more detailed websites on this topic and also links to other appropedia sites that have to do with solar technology.  +
3D printed Alm retractor  +
Amorphous silicon is a non-crystalline allotropic form of silicon that is bonded tetrahedrally. Amorphous silicon is a solar cell technology that has a high absorption coefficient but these solar cells can be instable when light hits the material.  +
An easy treatment in the earlier stages of the injury can be the use of ankle splints during sleep which helps lengthen the plantar fascia to reduce inflammation.  +
This ankle brace is designed to be stronger and more versatile than other OS ankle braces available online. Most notably, this brace does not require any heat forming where most others do.  +
A solar refrigerator directly uses the sun's heat to run the refrigeration process and can have many uses.  +
Scalable aquaponics system  +
This project aimed to give the Athena Delta printer a sleek looking heated bed that took advantage of the printer's shape.  +
The dual extrusion solution that I have chosen is one which uses a single hotend and only requires the addition of another extruder and a printed part to merge the outputs of the two filament extruders. This solution has the advantage of requiring no additional calibration, not needing added hardware for the second hotend and inputs and outputs to drive that hotend, and maintaining full build volume.  +
Engraver mod on the Athena II printer allows you to engrave various designs on acrylic sheets, plexiglass, cardboard and/or wooden surfaces.  +
AS heated print bed also has the advantage of being able to use a surface like PEI (polyetherimide) to print onto.  +
This Laser Engraver mod on the Athena II printer will allow you to engrave various designs on cardboard and/or wooden surfaces (acrylic material yet to be tested).  +
Aurora Solar Software is a solar design software that allows for the remote design of solar projects, estimate energy production and utility bill savings, and offer different financing scenarios using some special features such as consumption profile estimations, shading analysis, performance simulations and much more.  +
This Effector for a column delta printer, like the MOST delta RepRap allows different hotend nozzle sizes to be used  +
AutoInjectors are a spring-loaded device that aides in delivering the proper dosages of certain medicines. Prototype scad files for Autoject El replica are found in external links.  +
Affordable and strong plastic grinder  +
The azimuth angle is usually measured in degrees and describes the angle between a reference plane and a point of interest. The azimuth angle can be useful in many contexts.  +
B
This is a Bamboo Joint model that can be used in building bamboo houses, rooms or any sort of suspended pavilions.  +
A simplified means of using natural fibres to create a menstrual pad is described below.  +