Materials: 500 mL plastic bottles, wood, 2 inch wood screws, saran wrap, duct tape, soldering iron, string, drill
Procedure: - Construct each side of the green house individually - Use a soldering iron to melt a hole at the bottom of the bottle - Put string through bottles and tape ends on the wood, continue this step until rows completely fill each side (On the 4x2 sides there should be 54 bottles aligned, on the 2x2 side there should be 27 bottles) - Saran wrap a few layers on each side, make sure there are no openings - Screw the structure all together
Understanding the Market
I researched some plastic bottle greenhouses and many people used 2 liter bottles, cut the bottom of the bottles and stack them. Or they would put wood rods through the bottles and line them up.
You can use the ref code to include inline references. See Help:Footnotes for more.</ref>
Project Goals
- Have a door hinge for the top part of my greenhouse creating easy access to plants.
- Grow fruits and vegetables!
Design
-
My greenhouse blueprint
-
fin
Costs
Materials | Cost | |
---|---|---|
48 ft of pine wood (11/16 X 2 1/2 in) | $40.00 | |
2 inch wood screws (1 pound) | $4.00 |
See Help:Tables and Help:Table examples for more.
Next Steps
I want to test if my design is efficient for growing fruits and vegetables, even in the cold winter months.