mNo edit summary
(33 intermediate revisions by 7 users not shown)
Line 1: Line 1:
= Piston Water Pump =
Publication Number T-114
Publication Number T-114
Go back to [[AT_Sourcebook]]
[[Category:Appropriate_technology]]
[[Category:Energy]]
[[Category:Renewable energy]]


=== Published by: ===
=== Abstract ===
Brace Research Institute
This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are accompanied by a list of parts and materials used in the pumps manufacturing.
MacDonald College
McGill University
Ste. Anne de Bellevue 800
Quebec Canada H9X 1CO


[[Image:Pg1.jpg|thumb|Page 1 - Installation (not to scale)|left]]
=== Publisher ===
[[Image:Pg2.jpg|thumb|Page 2 - Assembly (not to scale)|left]]
[http://www.mcgill.ca/brace/ Brace Research Institute]<br />
[[Image:Pg3.jpg|thumb|Page 3 - Assembly |left]]
MacDonald College<br />
[[Image:Pg4.jpg|thumb|Page 4 - Assembly of Piston Rod (not to scale) |left]]
[http://www.mcgill.ca/ McGill University]<br />
[[Image:Pg5.jpg|thumb|Page 5 - Piston Assembly (not to scale)|left]]
Ste. Anne de Bellevue 800<br />
[[Image:Pg6.jpg|thumb|Page 6 - Schematic of Rubber Washer and Steel plate (not to scale)|left]]
Quebec, Canada<br />
[[Image:Pg7.jpg|thumb|Page 7 |left]]
H9X 1CO<br />
[[Image:Pg8.jpg|thumb|Page 8 - Pump Operational Steps|left]]
1977
[[Image:Pg9.jpg|thumb|Page 9 - List of Parts and Materials|left]]
 
= Installation =
[[Image:Pg1.jpg|thumb|Page 1 - Installation (not to scale)|center]]
 
= Assembly =
[[Image:Pg2.jpg|thumb|Page 2 - Assembly (not to scale)|center]]
[[Image:Pg3.jpg|thumb|Page 3 - Assembly |center]]
 
= Piston and Piston Rod =
[[Image:Pg4.jpg|thumb|Page 4 - Piston Rod (not to scale) |center]]
[[Image:Pg5.jpg|thumb|Page 5 - Piston (not to scale)|center]]
 
= Washers and Piston Head =
[[Image:Pg6.jpg|thumb|Page 6 - Schematic of Rubber Washer and Steel plate (not to scale)|center]]
[[Image:Pg7.jpg|thumb|Page 7 - Schematic of Black Steel Plates|center]]
 
= Operation =
[[Image:Pg8.jpg|thumb|Page 8 - Pump Operational Steps|center]]
 
= Parts and Materials =
[[Image:Pg9.jpg|thumb|Page 9 - List of Parts and Materials|center]]
==List of Parts and Materials==
* 36 - Nut Bored at 8mm
* 34 - Round HD-Screw 4mm
* 32 - Nut 8mm
* 30 - Iron Rod 8mm
* 28 - Steel Plate 4mm
* 26 - Steel Plate 4mm
* 24 - Rubber Washer 5mm
* 22 - Rubber Washer 5mm
* 20 - Black Steel Plate 4mm
* 18 - Black Steel Plate 4mm
* 16 - Coupling 90mm/100mm
* 14 - Galv. Pipe 33mm/42mm
* 12 - Galv. Pipe 80mm/90mm
 
[[Category: Wind power]]
[[Category: Water supply]]
[[Category: Pumping]]

Revision as of 02:20, 7 October 2010

Publication Number T-114 Go back to AT_Sourcebook

Abstract

This document gives schematic drawings of the assembly and operation of a wind powered water pump. The drawings are accompanied by a list of parts and materials used in the pumps manufacturing.

Publisher

Brace Research Institute
MacDonald College
McGill University
Ste. Anne de Bellevue 800
Quebec, Canada
H9X 1CO
1977

Installation

Page 1 - Installation (not to scale)

Assembly

Page 2 - Assembly (not to scale)
Page 3 - Assembly

Piston and Piston Rod

Page 4 - Piston Rod (not to scale)
Page 5 - Piston (not to scale)

Washers and Piston Head

Page 6 - Schematic of Rubber Washer and Steel plate (not to scale)
Page 7 - Schematic of Black Steel Plates

Operation

Page 8 - Pump Operational Steps

Parts and Materials

Page 9 - List of Parts and Materials

List of Parts and Materials

  • 36 - Nut Bored at 8mm
  • 34 - Round HD-Screw 4mm
  • 32 - Nut 8mm
  • 30 - Iron Rod 8mm
  • 28 - Steel Plate 4mm
  • 26 - Steel Plate 4mm
  • 24 - Rubber Washer 5mm
  • 22 - Rubber Washer 5mm
  • 20 - Black Steel Plate 4mm
  • 18 - Black Steel Plate 4mm
  • 16 - Coupling 90mm/100mm
  • 14 - Galv. Pipe 33mm/42mm
  • 12 - Galv. Pipe 80mm/90mm
Cookies help us deliver our services. By using our services, you agree to our use of cookies.