Line 57: Line 57:
* Can mirrors boost solar panel output? [https://www.green-technology.org/magazinenews/can-mirrors-boost-solar-panel-output/ Green Technology Magazine]
* Can mirrors boost solar panel output? [https://www.green-technology.org/magazinenews/can-mirrors-boost-solar-panel-output/ Green Technology Magazine]
* Un miroir peut-il augmenter la performance des panneaux solaires PV? [http://www.ecohabitation.com/actualite/nouvelles/miroir-augmenter-performance-panneaux-solaires-pv Ecohabitation]
* Un miroir peut-il augmenter la performance des panneaux solaires PV? [http://www.ecohabitation.com/actualite/nouvelles/miroir-augmenter-performance-panneaux-solaires-pv Ecohabitation]
 
* Using reflectors to increase the yield of solar panels [http://www.ecohome.net/guide/using-reflectors-increase-yield-solar-panels Eco Home]


{{Solar navbox}}
{{Solar navbox}}

Revision as of 05:13, 15 March 2018

Source

Bdrf-pv.png
  • Andrews, R.W.; Pollard, A.; Pearce, J.M., "Photovoltaic System Performance Enhancement With Nontracking Planar Concentrators: Experimental Results and Bidirectional Reflectance Function (BDRF)-Based Modeling," IEEE Journal of Photovoltaics 5(6), pp.1626-1635 (2015). DOI: 10.1109/JPHOTOV.2015.2478064 open access

Abstract

Lc-pv.jpg
Lowc.png

Non-tracking planar concentrators are a low-cost method of increasing the performance of traditional solar photovoltaic (PV) systems. This paper presents new methodologies for properly modeling this type of system design and experimental results using a bi-directional reflectance function (BDRF) of non-ideal surfaces rather than traditional geometric optics. This methodology allows for the evaluation and optimization of specular and non-specular reflectors in planar concentration systems. In addition, an outdoor system has been shown to improve energy yield by 45% for a traditional flat glass module and by 40% for a prismatic glass crystalline silicon module when compared to a control module at the same orientation. When compared to a control module set at the optimal tilt angle for this region, the energy improvement is 18% for both system. Simulations show that a maximum increase of 30% is achievable for an optimized system located in Kingston, ON using a reflector with specular reflection and an integrated hemispherical reflectance of 80%. This validated model can be used to optimize reflector topology to identify the potential for increased energy harvest from both existing PV and new-build PV assets.

Discussion


See also

Reflectorpv.jpg


In the news


Cookies help us deliver our services. By using our services, you agree to our use of cookies.