mNo edit summary
mNo edit summary
(25 intermediate revisions by the same user not shown)
Line 1: Line 1:
{{MOST}}
{{MOST}}
{{Pearce-pubs}}
{{Pearce-pubs}}
[[image:Mhi.jpg|right]]
 
* Savonen, B., Gershenson, J., Bow, J.K.; Pearce, J.M., [https://journals.lww.com/jpojournal/Abstract/publishahead/Open_Source_Three_Dimensional_Printable_Infant.99895.aspx Open-Source Three-Dimensional Printable Infant Clubfoot Brace], ''Journal of Prosthetics and Orthotics'': February 26, 2019. doi: 10.1097/JPO.0000000000000257 [ open access]
* Nemanja Jovanovic, Joshua M. Pearce, Jaan Praks. Design and Testing of a Low-Cost, Open Source, 3-D Printed Air-Bearing-Based Attitude Simulator for CubeSat Satellites. ''Journal of Small Satellites'' Vol. 8, No. 2, pp. 859–880 (2019). https://jossonline.com/letters/design-and-testing-of-a-low-cost-open-source-3-d-printed-air-bearing-based-attitude-simulator-for-cubesat-satellites/ [https://www.academia.edu/40617060/Design_and_Testing_of_a_Low-Cost_Open_Source_3-D_Printed_Air-Bearing-Based_Attitude_Simulator_for_CubeSat_Satellites open access]
* Arvind Ravindran, Sean Scsavnicki, Walker Nelson, Peter Gorecki, Jacob Franz, Shane Oberloier, Theresa K. Meyer, Andrew R. Barnard and Joshua M. Pearce. Open Source Waste Plastic Granulator. ''Technologies'' 2019, 7(4), 74; https://doi.org/10.3390/technologies7040074  [https://www.academia.edu/40616354/Open_Source_Waste_Plastic_Granulator open access]
* Ville Klar, Joshua M.Pearce, Pyry Kärki, Petri Kuosmanen, [https://www.sciencedirect.com/science/article/pii/S2468067219300471 Ystruder: open source multifunction extruder with sensing and monitoring capabilities]. ''HardwareX'' 6 (2019) e00080. https://doi.org/10.1016/j.ohx.2019.e00080 [https://www.academia.edu/40555880/Ystruder_Open_source_multifunction_extruder_with_sensing_and_monitoring_capabilities open access]
* Salil S. Sule, Aliaksei L. Petsiuk and Joshua M. Pearce. [https://www.mdpi.com/2410-390X/3/2/30 Open Source Completely 3-D Printable Centrifuge]. ''Instruments'' 2019, 3(2), 30; https://doi.org/10.3390/instruments3020030  [https://www.academia.edu/39224759/Open_Source_Completely_3-D_Printable_Centrifuge open access]
* Dennis J. Byard, Aubrey L. Woern,  Robert B. Oakley, Matthew J. Fiedler, Samantha L. Snabes, and Joshua M. Pearce. [https://www.sciencedirect.com/science/article/pii/S221486041830695X Green Fab Lab Applications of Large-Area Waste Polymer-based Additive Manufacturing]. ''Additive Manufacturing'' 27, (2019), pp. 515-525. https://doi.org/10.1016/j.addma.2019.03.006 [https://www.academia.edu/38728877/Fab_Lab_Applications_of_Large-Area_Waste_Polymer-based_Additive_Manufacturing open access]
*  Nicole Gallup, Jennifer K. Bow, and Joshua M. Pearce. [https://www.mdpi.com/2308-3417/3/4/89 Economic Potential for Distributed Manufacturing of Adaptive Aids for Arthritis Patients in the U.S.] ''Geriatrics'' 2018, 3(4), 89; https://doi.org/10.3390/geriatrics3040089 [https://www.academia.edu/37924049/Economic_Potential_for_Distributed_Manufacturing_of_Adaptive_Aids_for_Arthritis_Patients_in_the_U.S open access]
*  Aubrey L. Woern and Joshua M. Pearce. 3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing. ''Inventions'' 2018, 3(4), 78; https://doi.org/10.3390/inventions3040078 [https://www.academia.edu/37860682/3-D_Printable_Polymer_Pelletizer_Chopper_for_Fused_Granular_Fabrication-Based_Additive_Manufacturing open access]
* Oberloier, S. and Pearce, J.M.  [https://doi.org/10.1016/j.ohx.2018.e00044 Open Source Low-Cost Power Monitoring System], ''HardwareX'' 4(2018) e00044. https://doi.org/10.1016/j.ohx.2018.e00044  [https://www.academia.edu/37563713/Open_source_low-cost_power_monitoring_system open access]
* Iiro Hietanen, Ismo T. S.  Heikkinen, Hele Savin, and Joshua M. Pearce. Approaches to Open Source 3-D Printable Probe Positioners and Micromanipulators for Probe Stations. ''HardwareX'' (2018), e00042. https://doi.org/10.1016/j.ohx.2018.e00042 [https://www.academia.edu/37525103/Approaches_to_open_source_3-D_printable_probe_positioners_and_micromanipulators_for_probe_stations open access]
* Oberloier, S. and Pearce, J.M.  [http://www.mdpi.com/2411-5134/3/3/64/htm Belt-Driven Open Source Circuit Mill Using Low-Cost 3-D Printer Components], ''Inventions'' 2018, 3(3), 64; https://doi.org/10.3390/inventions3030064  [https://www.academia.edu/37347133/Belt-Driven_Open_Source_Circuit_Mill_Using_Low-Cost_3-D_Printer_Components open access]
* González, R., Pearce, J. and Lokki, T., 2018, August. Modular Design for Spherical Microphone Arrays. In Audio Engineering Society Conference: 2018 AES International Conference on Audio for Virtual and Augmented Reality.  ''2018 AES International Conference on Audio for Virtual and Augmented Reality (August 2018)''. Paper Number: P3-10. http://www.aes.org/e-lib/browse.cfm?elib=19701
* Woern, A.L.; Byard, D.J.; Oakley, R.B.; Fiedler, M.J.; Snabes, S.L.; Pearce, J.M. Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties. ''Materials'' '''2018''', 11, 1413. doi: https://doi.org/10.3390/ma11081413  [https://www.academia.edu/37223823/Fused_Particle_Fabrication_3-D_Printing_Recycled_Materials_Optimization_and_Mechanical_Properties open access]
[[image:Mhi.jpg|right|150px]]
* Pearce, J.M. [http://www.mdpi.com/2411-5134/3/3/44/htm Sponsored Libre Research Agreements to Create Free and Open Source Software and Hardware]. ''Inventions'' 2018, 3(3), 44; https://doi.org/10.3390/inventions3030044  [https://www.academia.edu/36991493/Sponsored_Libre_Research_Agreements_to_Create_Free_and_Open_Source_Software_and_Hardware open access]
* Khan, K.Y., Gauchia, L., Pearce, J.M., 2018. [https://jrenewables.springeropen.com/articles/10.1186/s40807-018-0051-6 Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems]. ''Renewables: Wind, Water, and Solar'' 5:5. https://doi.org/10.1186/s40807-018-0051-6  [https://www.academia.edu/36762531/Self-sufficiency_of_3-D_printers_utilizing_stand-alone_solar_photovoltaic_power_systems open access]
* Aubrey L. Woern, Joseph R. McCaslin, Adam M. Pringle, and Joshua M. Pearce. RepRapable Recyclebot: Open Source 3-D Printable Extruder for Converting Plastic to 3-D Printing Filament. ''HardwareX'' 4C (2018) e00026 doi: https://doi.org/10.1016/j.ohx.2018.e00026 [https://www.academia.edu/36721604/RepRapable_Recyclebot_Open_source_3-D_printable_extruder_for_converting_plastic_to_3-D_printing_filament open access]
* Pearce, Joshua M. (2018). How to Perform a Literature Review with Free and Open Source Software. ''Practical Assessment, Research & Evaluation'', 23(9). Available online: http://pareonline.net/getvn.asp?v=23&n=8 [https://www.academia.edu/36709736/How_to_Perform_a_Literature_Review_with_Free_and_Open_Source_Software open access]
* Joshua M. Pearce [https://doi.org/10.1016/j.mattod.2018.02.002 Expanding the Consumer Bill of Rights for material ingredients]. ''Materials Today'' 21(3), pp. 197-198 (2018). DOI: https://doi.org/10.1016/j.mattod.2018.02.002 [https://www.academia.edu/36484688/Expanding_the_Consumer_Bill_of_Rights_for_Material_Ingredients Open access preprint]
* David C. Denkenberger and and Joshua M. Pearce. [http://www.mdpi.com/2411-9660/2/2/11 Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer]. ''Designs'' '''2018''', 2(2), 11; doi:10.3390/designs2020011 [https://www.academia.edu/36461234/Design_Optimization_of_Polymer_Heat_Exchanger_for_Automated_Household-Scale_Solar_Water_Pasteurizer open access]
* Joshua M. Pearce. [https://www.developmentbookshelf.com/doi/abs/10.3362/9781780449531.021 Chapter 21 - Open-source 3D printing]. in ''Managing Humanitarian Innovation: The cutting edge of aid'', Editors: Eric James and Abigail Taylor, 2018, Practical Action Publishing. eISBN: 978-178044-953-1 | ISBN: 978-185339-953-4 doi:https://doi.org/10.3362/9781780449531.021
* Joshua M. Pearce. [https://www.developmentbookshelf.com/doi/abs/10.3362/9781780449531.021 Chapter 21 - Open-source 3D printing]. in ''Managing Humanitarian Innovation: The cutting edge of aid'', Editors: Eric James and Abigail Taylor, 2018, Practical Action Publishing. eISBN: 978-178044-953-1 | ISBN: 978-185339-953-4 doi:https://doi.org/10.3362/9781780449531.021
* Yuenyong Nilsiam, Paul Sanders, and Joshua M. Pearce. [http://www.mdpi.com/2504-4494/2/1/18 Applications of Open Source GMAW-Based Metal 3-D Printing]. ''Journal of Manufacturing and Materials Processing'' '''2018''', 2(1), 18; doi: https://doi.org/10.3390/jmmp2010018  [https://www.academia.edu/36158649/Applications_of_Open_Source_GMAW-Based_Metal_3-D_Printing open access]
* Yuenyong Nilsiam, Paul Sanders, and Joshua M. Pearce. [http://www.mdpi.com/2504-4494/2/1/18 Applications of Open Source GMAW-Based Metal 3-D Printing]. ''Journal of Manufacturing and Materials Processing'' '''2018''', 2(1), 18; doi: https://doi.org/10.3390/jmmp2010018  [https://www.academia.edu/36158649/Applications_of_Open_Source_GMAW-Based_Metal_3-D_Printing open access]
* Benjamin L. Savonen, Tobias J. Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Gershenson and Joshua M. Pearce. [http://www.mdpi.com/2227-7080/6/1/30 Development of a Resilient 3-D Printer for Humanitarian Crisis Response]. ''Technologies'' 2018, 6(1), 30; doi:10.3390/technologies6010030 [https://www.academia.edu/36117636/Development_of_a_Resilient_3-D_Printer_for_Humanitarian_Crisis_Response  open access]
* Benjamin L. Savonen, Tobias J. Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Gershenson and Joshua M. Pearce. [http://www.mdpi.com/2227-7080/6/1/30 Development of a Resilient 3-D Printer for Humanitarian Crisis Response]. ''Technologies'' 2018, 6(1), 30; doi:10.3390/technologies6010030 [https://www.academia.edu/36117636/Development_of_a_Resilient_3-D_Printer_for_Humanitarian_Crisis_Response  open access]
* L.Y. Beeker, Adam M. Pringle, Joshua M. Pearce. [http://www.sciencedirect.com/science/article/pii/S221486041730012X Open-source parametric 3-D printed slot die system for thin film semiconductor processing]. ''Additive Manufacturing'' 20 (2018) 90–100. https://doi.org/10.1016/j.addma.2017.12.004 [https://www.academia.edu/35667969/Open-source_Parametric_3-D_Printed_Slot_Die_System_for_Thin_Film_Semiconductor_Processing open access]
* L.Y. Beeker, Adam M. Pringle, Joshua M. Pearce. [http://www.sciencedirect.com/science/article/pii/S221486041730012X Open-source parametric 3-D printed slot die system for thin film semiconductor processing]. ''Additive Manufacturing'' 20 (2018) 90–100. https://doi.org/10.1016/j.addma.2017.12.004 [https://www.academia.edu/35667969/Open-source_Parametric_3-D_Printed_Slot_Die_System_for_Thin_Film_Semiconductor_Processing open access]
* Oberloier, S. and Pearce, J.M. [http://www.mdpi.com/2411-9660/2/1/2/htm General Design Procedure for Free and Open-Source Hardware for Scientific Equipment]. ''Designs'' 2018, 2(1), 2; doi:10.3390/designs2010002 [https://www.academia.edu/35603319/General_Design_Procedure_for_Free_and_Open-Source_Hardware_for_Scientific_Equipment open access]
* Oberloier, S. and Pearce, J.M. [http://www.mdpi.com/2411-9660/2/1/2/htm General Design Procedure for Free and Open-Source Hardware for Scientific Equipment]. ''Designs'' 2018, 2(1), 2; doi:10.3390/designs2010002 [https://www.academia.edu/35603319/General_Design_Procedure_for_Free_and_Open-Source_Hardware_for_Scientific_Equipment open access] [[image:Cover-designs-v2-i1.png.jpg|right]]
* J.M.Pearce. Maximizing Returns for Public Funding of Medical Research with Open-source Hardware. ''Health Policy and Technology.'' 6(4), 2017, pp. 381-382. https://doi.org/10.1016/j.hlpt.2017.09.001 [https://www.academia.edu/35382852/Maximizing_Returns_for_Public_Funding_of_Medical_Research_with_Open_source_Hardware open access]
* J.M.Pearce. Maximizing Returns for Public Funding of Medical Research with Open-source Hardware. ''Health Policy and Technology.'' 6(4), 2017, pp. 381-382. https://doi.org/10.1016/j.hlpt.2017.09.001 [https://www.academia.edu/35382852/Maximizing_Returns_for_Public_Funding_of_Medical_Research_with_Open_source_Hardware open access]
* Yuenyong Nilsiam, Paul Sanders, and Joshua M. Pearce. [http://www.sciencedirect.com/science/article/pii/S2214860417300374 Slicer and Optimization for Open-source GMAW-based Metal 3-D Printing]. ''Additive Manufacturing'' 18 (2017), pp. 110-120. doi: https://doi.org/10.1016/j.addma.2017.10.007 [https://www.academia.edu/34836143/Slicer_and_Process_Improvements_for_Open_source_GMAW_based_Metal_3_D_Printing open access]
* Yuenyong Nilsiam, Paul Sanders, and Joshua M. Pearce. [http://www.sciencedirect.com/science/article/pii/S2214860417300374 Slicer and Optimization for Open-source GMAW-based Metal 3-D Printing]. ''Additive Manufacturing'' 18 (2017), pp. 110-120. doi: https://doi.org/10.1016/j.addma.2017.10.007 [https://www.academia.edu/34836143/Slicer_and_Process_Improvements_for_Open_source_GMAW_based_Metal_3_D_Printing open access]
Line 16: Line 36:
* Yuenyong Nilsiam and Joshua M. Pearce. [http://www.mdpi.com/2411-9660/1/1/5 Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD]. ''Designs'' 2017, 1(1), 5; doi:10.3390/designs1010005 [https://www.academia.edu/33772407/Free_and_Open_Source_3-D_Model_Customizer_for_Websites_to_Democratize_Design_with_OpenSCAD open free access]
* Yuenyong Nilsiam and Joshua M. Pearce. [http://www.mdpi.com/2411-9660/1/1/5 Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD]. ''Designs'' 2017, 1(1), 5; doi:10.3390/designs1010005 [https://www.academia.edu/33772407/Free_and_Open_Source_3-D_Model_Customizer_for_Websites_to_Democratize_Design_with_OpenSCAD open free access]
* John J. Laureto and Joshua M. Pearce. [http://dx.doi.org/10.3390/technologies5020036 Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing] ''Technologies'' 2017, 5(2), 36; doi:10.3390/technologies5020036 [https://www.academia.edu/33578996/Open_Source_Multi-Head_3D_Printer_for_Polymer-Metal_Composite_Component_Manufacturing open access]
* John J. Laureto and Joshua M. Pearce. [http://dx.doi.org/10.3390/technologies5020036 Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing] ''Technologies'' 2017, 5(2), 36; doi:10.3390/technologies5020036 [https://www.academia.edu/33578996/Open_Source_Multi-Head_3D_Printer_for_Polymer-Metal_Composite_Component_Manufacturing open access]
* Tanikella, N.G., Savonen, B., Gershenson, J., Pearce, J.M. (2017). [https://www.ewb.org.au/jhe/index.php/jhe/article/view/60 Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing]. ''Journal of Humanitarian Engineering'' 5(1), 8-17. [https://www.academia.edu/33287420/Viability_of_Distributed_Manufacturing_of_Bicycle_Components_with_3-D_Printing_CEN_Standardized_Polylactic_Acid_Pedal_Testing open access]
* Tanikella, N.G., Savonen, B., Gershenson, J., Pearce, J.M. (2017). [https://www.ewb.org.au/jhe/index.php/jhe/article/view/60 Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing]. ''Journal of Humanitarian Engineering'' 5(1), 8-17. https://doi.org/10.36479/jhe.v5i1.60  [https://www.academia.edu/33287420/Viability_of_Distributed_Manufacturing_of_Bicycle_Components_with_3-D_Printing_CEN_Standardized_Polylactic_Acid_Pedal_Testing open access]
* Michaels, R.E. and Pearce, J.M. (2017). 3-D printing open-source click-MUAC bands for identification of malnutrition. ''Public Health Nutrition'', 20(11), pp. 2063-2066. https://doi.org/10.1017/S1368980017000726 [https://www.academia.edu/32956588/3-D_Printing_Open_Source_Click-MUAC_Bands_for_Identification_of_Malnutrition open access]
* Michaels, R.E. and Pearce, J.M. (2017). 3-D printing open-source click-MUAC bands for identification of malnutrition. ''Public Health Nutrition'', 20(11), pp. 2063-2066. https://doi.org/10.1017/S1368980017000726 [https://www.academia.edu/32956588/3-D_Printing_Open_Source_Click-MUAC_Bands_for_Identification_of_Malnutrition open access]
* Maria Frangos, Joshua Pearce, Tiberius Brastaviceanu, Ahmed Akl Mahmoud, Abran Khalid. (2017). "Democratising design in scientific innovation: application of an open value network to open source hardware design". ''Cumulus Working Papers 33/16: Cumulus Hong Kong 2016 – Open Design for E-very-thing'', pp. 333-339.[https://www.academia.edu/32745011/Democratising_design_in_scientific_innovation_application_of_an_open_value_network_to_open_source_hardware_design open access]
* Maria Frangos, Joshua Pearce, Tiberius Brastaviceanu, Ahmed Akl Mahmoud, Abran Khalid. (2017). "Democratising design in scientific innovation: application of an open value network to open source hardware design". ''Cumulus Working Papers 33/16: Cumulus Hong Kong 2016 – Open Design for E-very-thing'', pp. 333-339.[https://www.academia.edu/32745011/Democratising_design_in_scientific_innovation_application_of_an_open_value_network_to_open_source_hardware_design open access]

Revision as of 12:07, 19 October 2019

Mhi.jpg
OSL.jpg

Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs by Joshua M. Pearce

2014


Cookies help us deliver our services. By using our services, you agree to our use of cookies.