Pearce publications in open source: Difference between revisions

Revision as of 01:57, 2 June 2018

Khan, K.Y., Gauchia, L., Pearce, J.M., 2018. Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems. Renewables: Wind, Water, and Solar 5:5. https://doi.org/10.1186/s40807-018-0051-6 open access
Aubrey L. Woern, Joseph R. McCaslin, Adam M. Pringle, and Joshua M. Pearce. RepRapable Recyclebot: Open Source 3-D Printable Extruder for Converting Plastic to 3-D Printing Filament. HardwareX 4C (2018) e00026 doi: https://doi.org/10.1016/j.ohx.2018.e00026 open access
Pearce, Joshua M. (2018). How to Perform a Literature Review with Free and Open Source Software. Practical Assessment, Research & Evaluation, 23(9). Available online: http://pareonline.net/getvn.asp?v=23&n=8 open access
Joshua M. Pearce Expanding the Consumer Bill of Rights for material ingredients. Materials Today 21(3), pp. 197-198 (2018). DOI: https://doi.org/10.1016/j.mattod.2018.02.002 Open access preprint
David C. Denkenberger and and Joshua M. Pearce. Design Optimization of Polymer Heat Exchanger for Automated Household-Scale Solar Water Pasteurizer. Designs 2018, 2(2), 11; doi:10.3390/designs2020011 open access
Joshua M. Pearce. Chapter 21 - Open-source 3D printing. in Managing Humanitarian Innovation: The cutting edge of aid, Editors: Eric James and Abigail Taylor, 2018, Practical Action Publishing. eISBN: 978-178044-953-1 | ISBN: 978-185339-953-4 doi:https://doi.org/10.3362/9781780449531.021
Yuenyong Nilsiam, Paul Sanders, and Joshua M. Pearce. Applications of Open Source GMAW-Based Metal 3-D Printing. Journal of Manufacturing and Materials Processing 2018, 2(1), 18; doi: https://doi.org/10.3390/jmmp2010018 open access
Benjamin L. Savonen, Tobias J. Mahan, Maxwell W. Curtis, Jared W. Schreier, John K. Gershenson and Joshua M. Pearce. Development of a Resilient 3-D Printer for Humanitarian Crisis Response. Technologies 2018, 6(1), 30; doi:10.3390/technologies6010030 open access
L.Y. Beeker, Adam M. Pringle, Joshua M. Pearce. Open-source parametric 3-D printed slot die system for thin film semiconductor processing. Additive Manufacturing 20 (2018) 90–100. https://doi.org/10.1016/j.addma.2017.12.004 open access
Oberloier, S. and Pearce, J.M. General Design Procedure for Free and Open-Source Hardware for Scientific Equipment. Designs 2018, 2(1), 2; doi:10.3390/designs2010002 open access
J.M.Pearce. Maximizing Returns for Public Funding of Medical Research with Open-source Hardware. Health Policy and Technology. 6(4), 2017, pp. 381-382. https://doi.org/10.1016/j.hlpt.2017.09.001 open access
Yuenyong Nilsiam, Paul Sanders, and Joshua M. Pearce. Slicer and Optimization for Open-source GMAW-based Metal 3-D Printing. Additive Manufacturing 18 (2017), pp. 110-120. doi: https://doi.org/10.1016/j.addma.2017.10.007 open access
Dhwani K. Trivedi and Joshua M. Pearce. Open Source 3-D Printed Nutating Mixer. Applied Sciences, 2017, 7(9), 942; doi:10.3390/app7090942 open access
Nuchitprasitchai, S., Roggemann, M. & Pearce, J.M. Factors effecting real-time optical monitoring of fused filament 3D printing. Progress in Additive Manufacturing. 2(3), pp 133–149 (2017). doi:10.1007/s40964-017-0027-x open access
J. Gwamuri, Joshua M. Pearce, "Open source 3D printers: an appropriate technology for building low cost optics labs for the developing communities", Proc. SPIE 10452, 14th Conference on Education and Training in Optics and Photonics: ETOP 2017, 104522S (16 August 2017); doi: 10.1117/12.2269852; http://dx.doi.org/10.1117/12.2269852 open access
Emily E. Petersen, Romain W. Kidd, Joshua M. Pearce, Impact of DIY Home Manufacturing with 3-D Printing on the Toy and Game Market. Technologies 2017, 5(3), 45; doi: 10.3390/technologies5030045 open access
Nuchitprasitchai, S., Roggemann, M. & Pearce, J.M. Three Hundred and Sixty Degree Real-Time Monitoring of 3-D Printing Using Computer Analysis of Two Camera Views. J. Manuf. Mater. Process. 2017, 1(1), 2; doi:10.3390/jmmp1010002 open access
Yuenyong Nilsiam and Joshua M. Pearce. Free and Open Source 3-D Model Customizer for Websites to Democratize Design with OpenSCAD. Designs 2017, 1(1), 5; doi:10.3390/designs1010005 open free access
John J. Laureto and Joshua M. Pearce. Open Source Multi-Head 3D Printer for Polymer-Metal Composite Component Manufacturing Technologies 2017, 5(2), 36; doi:10.3390/technologies5020036 open access
Tanikella, N.G., Savonen, B., Gershenson, J., Pearce, J.M. (2017). Viability of Distributed Manufacturing of Bicycle Components with 3-D Printing: CEN Standardized Polylactic Acid Pedal Testing. Journal of Humanitarian Engineering 5(1), 8-17. open access
Michaels, R.E. and Pearce, J.M. (2017). 3-D printing open-source click-MUAC bands for identification of malnutrition. Public Health Nutrition, 20(11), pp. 2063-2066. https://doi.org/10.1017/S1368980017000726 open access
Maria Frangos, Joshua Pearce, Tiberius Brastaviceanu, Ahmed Akl Mahmoud, Abran Khalid. (2017). "Democratising design in scientific innovation: application of an open value network to open source hardware design". Cumulus Working Papers 33/16: Cumulus Hong Kong 2016 – Open Design for E-very-thing, pp. 333-339.open access
Karankumar C. Dhankani, Joshua M. Pearce. Open Source Laboratory Sample Rotator Mixer and Shaker. HardwareX 1, pp.1-12 (2017) (in press). doi:j.ohx.2016.07.001 open access
Pearce, J.M., (2017). Emerging Business Models for Open Source Hardware. Journal of Open Hardware. 1(1), p.2. DOI: http://doi.org/10.5334/joh.4 open access
Handy Chandra, Spencer W. Allen, Shane W. Oberloier, Nupur Bihari, Jephias Gwamuri and Joshua M. Pearce. Open-Source Automated Mapping Four-Point Probe. Materials 2017, 10(2), 110. doi: 10.3390/ma10020110 open access
Yuenyong Nilsiam and Joshua M. Pearce. Open Source Database and Website to Provide Free and Open Access to Inactive U.S. Patents in the Public Domain. Inventions 1(4), 24 (2016); doi: 10.3390/inventions1040024 Open access
Wijnen, B., Petersen, E. E., Hunt, E. J. and Pearce, J. M. (2016), Free and open-source automated 3-D microscope. Journal of Microscopy 264(2), 238-246. doi:10.1111/jmi.12433 free open access
Amberlee S. Haselhuhn, Michael W. Buhr, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce, Structure-Property Relationships of Common Aluminum Weld Alloys Utilized as Feedstock for GMAW-based 3-D Metal Printing. Materials Science and Engineering: A, 673, pp. 511–523 (2016). DOI: http://dx.doi.org/10.1016/j.msea.2016.07.099 open access
Chenlong Zhang, Bas Wijnen, Joshua M. Pearce. Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem. Journal of Laboratory Automation 21(4) 517-525 (2016). DOI: http://dx.doi.org/10.1177/2211068215624406 open access
J. M. Pearce, N. C. Anzalone, and C. L. Heldt. Open-source Wax RepRap 3-D Printer for Rapid Prototyping Paper-Based Microfluidics, Journal of Laboratory Automation 21(4) 510–516 (2016). DOI: http://dx.doi.org/10.1177/2211068215624408 open access
John J. Laureto, Serguei V. Dessiatoun, Michael M. Ohadi and Joshua M. Pearce. Open Source Laser Polymer Welding System: Design and Characterization of Linear Low-Density Polyethylene Multilayer Welds. Machines 2016, 4(3), 14; doi: 10.3390/machines4030014 free open access
Joshua M. Pearce. (2015) Return on Investment for Open Source Hardware Development. Science and Public Policy. 43(2),192-195 (2016). DOI :10.1093/scipol/scv034 open access
Joshua M. Pearce. Undermined by overhead accounting. Science 352, 158–159 (2016). doi:10.1126/science.352.6282.158-b
André O. Laplume, Bent Petersen, Joshua M. Pearce, Global value chains from a 3D printing perspective, Journal of International Business Studies 47(5), 595–609 (2016). doi:10.1057/jibs.2015.47 open access
Wijnen, B., Anzalone, G. C., Haselhuhn, A.S., Sanders, P.G., Pearce, J. M. Free and Open-source Control Software for 3-D Motion and Processing. Journal of Open Research Software, 4: e2, DOI: http://dx.doi.org/10.5334/jors.78 free access
Jephias Gwamuri, Dhiogo Franco, Khalid Y. Khan, Lucia Gauchia and Joshua M. Pearce. High-Efficiency Solar-Powered 3-D Printers for Sustainable Development. Machines 2016, 4(1), 3; doi: 10.3390/machines4010003 open access
Joshua M. Pearce. Science for All: How to Make Free, Open Source Laboratory Hardware, Scientific American Blog. Dec. 2015.
Joshua Pearce. Sharing Free Knowledge to Save Humanity. in Janet Alexandersson (ed). How To Save Humanity. 2015. Available: http://howtosavehumanity.com/
Andre Laplume, Gerald C. Anzalone, Joshua M. Pearce. Open-source, self-replicating 3-D printer factory for small-business manufacturing. The International Journal of Advanced Manufacturing Technology. 85(1), pp 633-642 (2016). doi:10.1007/s00170-015-7970-9 free open access preprint
Yuenyong Nilsiam, Amberlee Haselhuhn, Bas Wijnen, Paul Sanders, & Joshua M. Pearce. Integrated Voltage - Current Monitoring and Control of Gas Metal Arc Weld Magnetic Ball-Jointed Open Source 3-D Printer.Machines 3(4), 339-351 (2015). doi:10.3390/machines3040339 open access
Ben Wittbrodt, John Laureto, Brennan Tymrak and Joshua M Pearce. Distributed manufacturing with 3-D printing: a case study of recreational vehicle solar photovoltaic mounting systems. Journal of Frugal Innovation 1(1), 1-7 (2015). doi:10.1186/s40669-014-0001-z open access
Joshua M. Pearce. A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing material. World Patent Information 42, 13–18 (2015). doi:10.1016/j.wpi.2015.07.003 open access
A. Pinar, B. Wijnen, G. C. Anzalone, T. C. Havens, P. G. Sanders, J. M. Pearce. Low-cost Open-Source Voltage and Current Monitor for Gas Metal Arc Weld 3-D Printing. Journal of Sensors Vol. 2015, Article ID 876714, 8 pages, 2015. doi:10.1155/2015/876714 open access
Gerald Anzalone, Bas Wijnen, Joshua M. Pearce , (2015) "Multi-material additive and subtractive prosumer digital fabrication with a free and open-source convertible delta RepRap 3-D printer", Rapid Prototyping Journal, 21(5), pp.506 - 519. doi:http://dx.doi.org/10.1108/RPJ-09-2014-0113 open access
Wittbrodt BT, Squires DA, Walbeck J, Campbell E, Campbell WH, Pearce JM. (2015) Open-Source Photometric System for Enzymatic Nitrate Quantification. PLoS ONE 10(8): e0134989. doi: 10.1371/journal.pone.0134989 open access
Amberlee S. Haselhuhn, Bas Wijnen, Gerald C. Anzalone, Paul G. Sanders, Joshua M. Pearce, In Situ Formation of Substrate Release Mechanisms for Gas Metal Arc Weld Metal 3-D Printing. Journal of Materials Processing Technology. 226, pp. 50–59 (2015) DOI: 10.1016/j.jmatprotec.2015.06.038 open access
Joshua M. Pearce and Amberlee S. Haselhuhn. Intellectual Property as a Strategic National Industrial Weapon: the Case of 3D Printing. Engineer: The Professional Bulletin of Army Engineers. 45(2), 29-31 (2015).open access
Pearce, J. M. (2015). Maximizar la rentabilidad de la inversión para la salud pública con hardware médico de código abierto. Gaceta Sanitaria. 29(4), 319. DOI: 10.1016/j.gaceta.2015.03.010 open access
- English: Maximizing return on investment for public health with open-source medical hardware
Joshua M. Pearce. Buckle up for fast-tracked science thanks to open-source hardware. Engineering for Change. June 8, 2015.
Chelsea Schelly, Gerald Anzalone, Bas Wijnen, Joshua M. Pearce, (2015). Open-source 3-D printing Technologies for education: Bringing Additive Manufacturing to the Classroom.Journal of Visual Languages & Computing. 28(2015)226–237. DOI: 10.1016/j.jvlc.2015.01.004 open access
Joshua Pearce Michigan Tech course to build your own 3D printer, Opensource.com March 31, 2015.
Lucas S. Osborn, Joshua Pearce, Amberlee Haselhuhn. A Case for Weakening Patent Rights. St. John’s Law Review. 89(4), pp.1185-1253 (2015). Open access preprint
Pearce, J.M. (2015) Quantifying the Value of Open Source Hardware Development. Modern Economy, 6, 1-11. doi: 10.4236/me.2015.61001. open access
Bas Wijnen, G. C. Anzalone and Joshua M. Pearce, Open-source mobile water quality testing platform. Journal of Water, Sanitation and Hygiene for Development, 4(3) pp. 532–537 (2014). doi:10.2166/washdev.2014.137 open access

Open-Source Lab: How to Build Your Own Hardware and Reduce Research Costs by Joshua M. Pearce

2014

Imprint: Elsevier
ISBN: 9780124104624
Order
Free Preview

Joshua M. Pearce, “Open Source Hardware in Academia” in Alicia Gibb (Ed.) Building Open Source Hardware: DIY Manufacturing for Hackers and Makers, Addison-Wesley: New York, pp. 253-277 (2015).
Amberlee S. Haselhuhn, Eli J. Gooding, Alexandra G. Glover, Gerald C. Anzalone, Bas Wijnen, Paul G. Sanders, Joshua M. Pearce. Substrate Release Mechanisms for Gas Metal Arc 3-D Aluminum Metal Printing. 3D Printing and Additive Manufacturing. 1(4): 204-209 (2014). DOI: http://dx.doi.org/10.1089/3dp.2014.0015 open access
Bas Wijnen, Emily J. Hunt, Gerald C. Anzalone, Joshua M. Pearce, 2014. Open-source Syringe Pump Library, PLoS ONE 9(9): e107216. doi:10.1371/journal.pone.0107216 open access
Joshua M. Pearce, “It is Time to Move Research Expenditures to the Denominator in University Metrics”, Academe 100(6), November-December 2014. open access pre-print
- Joshua M. Pearce, “One Way Ranking with Research Expenditures Slows Scientific Progress”, Academe Blog, November 18, 2014. (More accessibly version with hyperlinks)
Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders and Joshua M. Pearce, “Low-Cost Open-Source 3-D Metal Printing” IEEE Access, 1, pp.803-810, (2013). doi: 10.1109/ACCESS.2013.2293018 open access preprint
Joshua M. Pearce, Free Innovation Accelerator, Analytical Scientist, Issue #1113, Article #303, pp. 18-20. December 17th, 2013.
J.M. Pearce, “Commentary: Open-source hardware for research and education”, Physics Today 66(11), 8 (2013); doi: 10.1063/PT.3.2160
J.M. Pearce, 3D-printing your lab equipment—it’s cheaper than you think - Elsevier Connect, 2013.
B.T. Wittbrodt, A.G. Glover, J. Laureto, G.C. Anzalone, D. Oppliger, J.L. Irwin, J.M. Pearce (2013), Life-cycle economic analysis of distributed manufacturing with open-source 3-D printers, Mechatronics 23, 713-726. open access
Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) Open-Source 3D-Printable Optics Equipment. PLoS ONE 8(3): e59840. doi:10.1371/journal.pone.0059840 @ PLoS One open access
Anzalone GC, Glover AG, Pearce JM. Open-Source Colorimeter. Sensors. 2013; 13(4):5338-5346. doi:10.3390/s130405338 open access
Joshua M. Pearce, Open-source nanotechnology: Solutions to a modern intellectual property tragedy, Nano Today, Volume 8, Issue 4, August 2013, Pages 339–341. open access
Joshua M. Pearce, Share, and We All Grow Richer, The Analytical Scientist, Issue #0213, Article #301 (2013).
Joshua M. Pearce, “Building Research Equipment with Free, Open-Source Hardware.” Science 337 (6100): 1303–1304 (2012) .open access [click through to scimag], Podcast
Joshua M. Pearce, “Open Source Research in Sustainability”, Sustainability: the Journal of Record, 5(4), pp. 238-243 (2012). open access
Joshua M. Pearce "Make nanotechnology research open-source", Nature 491, pp. 519–521(2012). open access
Joshua M. Pearce, “The Case for Open Source Appropriate Technology”, Environment, Development and Sustainability, 14, pp. 425-431 (2012). open access

@@ Line 2: / Line 2: @@
 {{Pearce-pubs}}
 [[image:Mhi.jpg|right|150px]]
+* Khan, K.Y., Gauchia, L., Pearce, J.M., 2018. [https://jrenewables.springeropen.com/articles/10.1186/s40807-018-0051-6 Self-sufficiency of 3-D printers: utilizing stand-alone solar photovoltaic power systems]. ''Renewables: Wind, Water, and Solar'' 5:5. https://doi.org/10.1186/s40807-018-0051-6  [https://www.academia.edu/36762531/Self-sufficiency_of_3-D_printers_utilizing_stand-alone_solar_photovoltaic_power_systems open access]
 * Aubrey L. Woern, Joseph R. McCaslin, Adam M. Pringle, and Joshua M. Pearce. RepRapable Recyclebot: Open Source 3-D Printable Extruder for Converting Plastic to 3-D Printing Filament. ''HardwareX'' 4C (2018) e00026 doi: https://doi.org/10.1016/j.ohx.2018.e00026 [https://www.academia.edu/36721604/RepRapable_Recyclebot_Open_source_3-D_printable_extruder_for_converting_plastic_to_3-D_printing_filament open access]
 * Pearce, Joshua M. (2018). How to Perform a Literature Review with Free and Open Source Software. ''Practical Assessment, Research & Evaluation'', 23(9). Available online: http://pareonline.net/getvn.asp?v=23&n=8 [https://www.academia.edu/36709736/How_to_Perform_a_Literature_Review_with_Free_and_Open_Source_Software open access]