(This is about a spork)
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Template=
=A Better Spork with a Better Knife=




----
----
  Copy the wiki markup below to your page to use as a template
   
----
----


{{242}}
{{242}}
==Title of the device or system ==
==A better way to eat ==
  Project developed by [your name linked to your user account]
  Project developed by [[User:Forest.andresen|Forest.andresen]] ([[User talk:Forest.andresen|talk]]) 13:20, 25 April 2017 (PDT)
  Add a status meter by copying the following templates (inside double curly brackets) into your page as you reach each step: status-design, status-prototype, status-deployed, status-model and status-verified....
  Add a status meter by copying the following templates (inside double curly brackets) into your page as you reach each step: status-design, status-prototype, status-deployed, status-model and status-verified....
{{Statusboxtop}}
{{Statusboxtop}}
Line 17: Line 17:


==Abstract==
==Abstract==
# Paragraph description of the OSAT - why is it Appropriate? What need does it fulfil? Are there case studies you have found of a technology being used successfully?
# Everyone eats, some eat with their hands, and some eat with utensils. This is a project focusing around bringing the best utensils to people worldwide, without the usual cost involved. This is  the creation of a utensil that can be easily printed by a 3D printer anywhere around the world. Our wish at project spork is to enable all to have a clean and convenient eating experience. The better spork is made to be east to clean and to have significantly better cutting ability than any other spork/knife to date.
# Picture of completed print using [[Image:Wood_WorkingClamp_Parts.png|200px|right]]
# Picture of completed print using [[Image:|200px|right]]


== Bill of Materials==
== Bill of Materials==
# Provide a full BOM -- Materials needed for fabrication of device and alternative materials if they are not available, prices/sources of non-printable parts
# Provide a full BOM -- This part needs only a 3D printer and a filament that is non toxic.
## Upload and link to all source files from open source CAD
## Upload and link to all source files from open source CAD
## Upload and link to all STLs
## Upload and link to all STLs


== Tools needed for fabrication of the OSAT==
== Tools needed for fabrication of the OSAT==
# Jellybox or similar RepRap 3-D printer
# A 3D printer
#
# memory card
# computer
# various printer tools like tweezers


== Skills and Knowledge Necessary to Make the OSAT ==
== Skills and Knowledge Necessary to Make the OSAT ==
* If you used special skill – link to relevant wikipedia or wikiversity articles/courses
* You simply need to be able to download and the part and use a 3D Printer to make it.


== Technical Specifications and Assembly Instructions==
== Technical Specifications and Assembly Instructions==
# Provide directions for print/assembly - be detailed enough in your “how to” to ensure that someone could construct the device from your description. Consider the elegance of IKEA like instructions.
# This device does not need assembly, and will be able to be used right off the print bed.
# Include print time estimate
# Print time: approx. 30 minutes
# Include assembly time estimate
# drawing below:
# Including drawings or pictures of the device at stage of assembly at minimum. (http://www.appropedia.org/Special:Upload)
[[image:Screen_Shot_2017-04-18_at_12.55.22_AM.png|thumb|left]]
# Consider video if appropriate
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Revised simifinal product
[[image:Screen_Shot_2017-05-02_at_11.48.05_PM.png|thumb|left]]
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
# no video yet
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
{|style="border:1px solid #73BF73; background-color: #E6FFE6; margin-left:.1em; margin-top:2px; -moz-border-radius:15px;" align="right" width="150px"
!<big>Example video summary of textbook</big>
!<big>Example video summary of textbook</big>
|-
|-
|<center>{{#widget:YouTube|id=yiJDx9dCfEQ}} </center>
|<center>{{#widget:I have not added a video yet}} </center>
|-
|-
|}
|}


=== Common Problems and Solutions===
=== Common Problems and Solutions===
* Include common mistakes/problems to avoid in building your OSAT and how to overcome them
* I recommend including a brim to ensure the spork does not peel off the build plate while printing. This will need someone to chip off the brim when the spork comes out.
* before loading the stl file into cura, I ran it through netfabb to make sure it would print. it turned out that it had some problems and was not a "water tight" shape yet.
* I recommend sanding or polishing the parts of the utensil that will touch your mouth, otherwise the sharp areas can be uncomfortable or harm you.


== Cost savings==
== Cost savings==
* If your solution is not a low cost one then it is not really appropriate.
# Printing this spork knife will cost under 20 cents. while buying a similar design on amazon will cost more than $8.
# Estimate your costs
# https://www.amazon.com/dp/B0062MHSI2/ref=twister_B00OYSZG1W?_encoding=UTF8&psc=1
# Find a commercial equivalent
# In addition to the cost savings, this spork is a better design and specifically has a more effective knife. users can also customize the file before printing to make it the right shape and size for them and their diet.
# Calculate $ savings and % savings


==References==
==References==

Revision as of 05:07, 3 May 2017

A Better Spork with a Better Knife



A better way to eat

Project developed by Forest.andresen (talk) 13:20, 25 April 2017 (PDT)
Add a status meter by copying the following templates (inside double curly brackets) into your page as you reach each step: status-design, status-prototype, status-deployed, status-model and status-verified....

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Abstract

  1. Everyone eats, some eat with their hands, and some eat with utensils. This is a project focusing around bringing the best utensils to people worldwide, without the usual cost involved. This is the creation of a utensil that can be easily printed by a 3D printer anywhere around the world. Our wish at project spork is to enable all to have a clean and convenient eating experience. The better spork is made to be east to clean and to have significantly better cutting ability than any other spork/knife to date.
  2. Picture of completed print using [[Image:|200px|right]]

Bill of Materials

  1. Provide a full BOM -- This part needs only a 3D printer and a filament that is non toxic.
    1. Upload and link to all source files from open source CAD
    2. Upload and link to all STLs

Tools needed for fabrication of the OSAT

  1. A 3D printer
  2. memory card
  3. computer
  4. various printer tools like tweezers

Skills and Knowledge Necessary to Make the OSAT

  • You simply need to be able to download and the part and use a 3D Printer to make it.

Technical Specifications and Assembly Instructions

  1. This device does not need assembly, and will be able to be used right off the print bed.
  2. Print time: approx. 30 minutes
  3. drawing below:
Screen Shot 2017-04-18 at 12.55.22 AM.png




















Revised simifinal product

Screen Shot 2017-05-02 at 11.48.05 PM.png








  1. no video yet
Example video summary of textbook
Error in widget I have not added a video yet: Unable to load template 'wiki:I have not added a video yet'

Common Problems and Solutions

  • I recommend including a brim to ensure the spork does not peel off the build plate while printing. This will need someone to chip off the brim when the spork comes out.
  • before loading the stl file into cura, I ran it through netfabb to make sure it would print. it turned out that it had some problems and was not a "water tight" shape yet.
  • I recommend sanding or polishing the parts of the utensil that will touch your mouth, otherwise the sharp areas can be uncomfortable or harm you.

Cost savings

  1. Printing this spork knife will cost under 20 cents. while buying a similar design on amazon will cost more than $8.
  2. https://www.amazon.com/dp/B0062MHSI2/ref=twister_B00OYSZG1W?_encoding=UTF8&psc=1
  3. In addition to the cost savings, this spork is a better design and specifically has a more effective knife. users can also customize the file before printing to make it the right shape and size for them and their diet.

References

  • The sources of information (e.g. engineering handbooks, journal articles, government documents, webpages, books, magazine articles etc.). References should use the <ref> </ref> and <references/> tags and can be in any format but should include all the information necessary for someone else to find the same information you did. For example: [1]
  1. web page: Department of Energy (DOE) Landscaping and Energy Efficiency, DOE/GO-10095 (1995) Available: http://www.eren.doe.gov/erec/factsheets/landscape.html

Based on the developmental needs addressed (e.g. food, heat, electricity, clean water, health care, etc.) be sure to label your device in the proper categories e.g. use [[Category:Water]]. Be sure to categorize your device so that it will be easy to find – for example “Low voltage connection basics” is categorized in [[Category:How tos]] [[Category:Electricity]] [[Category:Electric lighting]].

Cookies help us deliver our services. By using our services, you agree to our use of cookies.