Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Open Source Salt Spray Chamber"

From Appropedia
Jump to: navigation, search
(Project Members)
Line 3: Line 3:
 
<!-- next line is the code for inserting an image; delete if you don't have an image yet -->
 
<!-- next line is the code for inserting an image; delete if you don't have an image yet -->
  
<center>''This project was first designed to upgrade a salt spray chamber on Michigan Technological Universities campus. The project has been expanded to upload all designs of the salt spay chamber to open source design. ''</center>
+
<center>''This project was first designed to upgrade a salt spray chamber on Michigan Technological Universities campus. The project has been expanded to convert all designs of the salt spay chamber to open source design. ''</center>
  
 
== Project goals ==
 
== Project goals ==

Revision as of 17:00, 10 November 2015


This project was first designed to upgrade a salt spray chamber on Michigan Technological Universities campus. The project has been expanded to convert all designs of the salt spay chamber to open source design.

Project goals

  1. Plan upgrades
  2. Execute Upgrades
  3. Make BOM and instructions for entire chamber
  4. Profit

Design

All design files are hosted on http://3dprint.nih.gov The links for each file are listed below.

Salt Spray Chamber Upgrade
Before and After
Before  
After  
Insulation Clamp
Side View  
Front View  
In Use  
Hood Prop
Printed Hood Prop  
Drain Images
Drain in Chamber  
Secondary Angle  
Nozzle Images
Nozzle with Clamp  
Sample Holder
Holder in Use  

Costs

You may describe your costs here.

Nozzle Clamp Insulation Bracket Coupon Rack Hood Props Chamber Drain
Original Price $5 $30 $100 $60 $10
New Price <<$1 $16 for 16 <<$1 each $11.30 <<$1
Savings $5 $14 $100 $48.70 $10


Next steps

Publish detailed instructions.

Conclusions

This salt spray chamber would save approximately $19,000 from our first rough estimates. Our current modifications now save $475 assuming that just 4 sample racks are needed. These modifications can easily be put into most chambers with only small changes needed. This chamber has no loss in quality, and currently complies with all ASTM standards.

Project Members

Cleyton Cavallaro, Thomas Korejsza, Eli Gooding, Erik Bain, Mike Holt, Kyle Barie