Line 24: Line 24:
|lines=5
|lines=5
|Image:Nozzle_clamp.PNG|[http://3dprint.nih.gov/discover/3dpx-002137 Nozzle Clamp]
|Image:Nozzle_clamp.PNG|[http://3dprint.nih.gov/discover/3dpx-002137 Nozzle Clamp]
|Image:Insulation_bracket.PNG|[http://3dprint.nih.gov/discover/3dpx-002140 Insulation Bracket]
|Image:Insulation_bracket.PNG|[http://3dprint.nih.gov/discover/3DPX-002169 Insulation Bracket]
|Image:Coupon_rack.PNG|[http://3dprint.nih.gov/discover/3dpx-002139 Coupon Rack]
|Image:Coupon_rack.PNG|[http://3dprint.nih.gov/discover/3dpx-002139 Coupon Rack]
|Image:Hood_prop.PNG|[http://3dprint.nih.gov/discover/3dpx-002150 Hood Props]
|Image:Hood_prop.PNG|[http://3dprint.nih.gov/discover/3dpx-002150 Hood Props]

Revision as of 14:23, 10 November 2015

Sample photo caption.
This project was first designed to upgrade a salt spray chamber on Michigan Technological Universities campus. The project has been expanded to upload all designs of the salt spay chamber to open source design.

Project goals

  1. Plan upgrades
  2. Execute Upgrades
  3. Make BOM and instructions for entire chamber
  4. Profit

Design

All design files are hosted on http://3dprint.nih.gov The links for each file are listed below.

Costs

You may describe your costs here.

Nozzle Clamp Insulation Bracket Coupon Rack Hood Props Chamber Drain
Original Price $5 $30 $100 $60 $10
New Price <<$1 $16 for 16 <<$1 each $11.30 <<$1
Savings $5 $14 $100 $48.70 $10


Next steps

Publish detailed instructions.

Conclusions

This salt spray chamber would save approximately $19,000 from our first rough estimates. Our current modifications now save $475 assuming that just 4 sample racks are needed. These modifications can easily be put into most chambers with only small changes needed. This chamber has no loss in quality, and currently complies with all ASTM standards.

Project Members

Cleyton Cavallaro, Eli Gooding, Thomas Korejza, Erik Bain, Mike Holt, Kyle Barie

Cookies help us deliver our services. By using our services, you agree to our use of cookies.