Open-source chopper wheel: Difference between revisions

Revision as of 01:07, 28 March 2013

Template:Statusboxtop Template:Status-design Template:Status-prototype Template:Status-verified Template:Boxbottom

This project is part of a collection on open source optics meant to radically reduce the cost of experimental optical equipment.

This is a parametric chopper wheel - so you can choose how many holes, their sizes, and the overall size of the wheel to customize them for your own optical experiments.

The default code has an m3 nut cage to firmly affix the wheel to a spinning shaft.

The OpenSCAD and STL files of some examples are here: http://www.thingiverse.com/thing:28121

See: Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) Open-Source 3D-Printable Optics Equipment. PLoS ONE 8(3): e59840. doi:10.1371/journal.pone.0059840 open access

Revision as of 20:26, 5 September 2012 (edit) J.M.Pearce (talk \| contribs) mNo edit summary ← Older edit		Revision as of 01:07, 28 March 2013 (edit) (undo) J.M.Pearce (talk \| contribs) mNo edit summary Newer edit →
Line 19:		Line 19:

	The OpenSCAD and STL files of some examples are here: http://www.thingiverse.com/thing:28121		The OpenSCAD and STL files of some examples are here: http://www.thingiverse.com/thing:28121

			See: Zhang C, Anzalone NC, Faria RP, Pearce JM (2013) [[Open-Source 3D-Printable Optics Equipment]]. ''PLoS ONE'' 8(3): e59840. doi:10.1371/journal.pone.0059840 [http://www.plosone.org/article/info%3Adoi%2F10.1371%2Fjournal.pone.0059840 open access]