J.M.Pearce (talk | contribs) m (→Source) |
J.M.Pearce (talk | contribs) m (→Source) |
||
| Line 10: | Line 10: | ||
==Source== | ==Source== | ||
[[image:RepRapsci.jpg|right|500px]] | [[image:RepRapsci.jpg|right|500px]] | ||
* Chenlong Zhang, Bas Wijnen, Joshua M. Pearce. Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem. ''Journal of Laboratory Automation'' ( | * Chenlong Zhang, Bas Wijnen, Joshua M. Pearce. Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem. ''Journal of Laboratory Automation'' 21(4) 517-525 (2016). DOI: http://dx.doi.org/10.1177/2211068215624406 [open access] | ||
* This project derived from: [[Delta Build Overview:MOST| MOST Delta RepRap]] and the [[Athena_Build_Overview| MOST Athena RepRap]] | * This project derived from: [[Delta Build Overview:MOST| MOST Delta RepRap]] and the [[Athena_Build_Overview| MOST Athena RepRap]] | ||
* Bill of materials https://osf.io/5kev4/ | * Bill of materials https://osf.io/5kev4/ | ||
Revision as of 11:42, 18 July 2016
Template:Statusboxtop Template:Status-design Template:Status-model Template:Status-prototype Template:Status-verified You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom
Source
- Chenlong Zhang, Bas Wijnen, Joshua M. Pearce. Open-source 3-D Platform for Low-cost Scientific Instrument Ecosystem. Journal of Laboratory Automation 21(4) 517-525 (2016). DOI: http://dx.doi.org/10.1177/2211068215624406 [open access]
- This project derived from: MOST Delta RepRap and the MOST Athena RepRap
- Bill of materials https://osf.io/5kev4/
- OpenSCAD code: https://osf.io/v2pwa/
- Open Source Software: Franklin
Abstract
The combination of open-source software and hardware provide technically feasible methods to create low-cost, highly-customized scientific research equipment. Open-source 3-D printers have proven useful for fabricating scientific tools. Here the capabilities of an open-source 3-D printer are expanded to become a highly-flexible scientific platform. An automated low-cost 3-D motion control platform is presented having the capacity to perform scientific applications including: i) 3-D printing of scientific hardware, ii) laboratory auto-stirring, measuring and probing, iii) automated fluid handling and iv) shaking and mixing. The open-source 3-D platform not only facilities routine research while radically reducing the cost, but it also inspires the creation of a diverse array of custom instruments that can be shared and replicated digitally throughout the world to drive down the cost of research and education further.
Keywords=
3-D printing, 3-D platform, fluid handling, open source hardware, laboratory equipment