Line 41: Line 41:
* [[Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability]]
* [[Distributed Manufacturing of Flexible Products- Technical Feasibility and Economic Viability]]
* [[Quantifying the Value of Open Source Hardware Development]]
* [[Quantifying the Value of Open Source Hardware Development]]
 
* [[Low-cost open source ultrasound-sensing based navigational support for visually impaired]]


{{MOST-RepRap}}
{{MOST-RepRap}}

Revision as of 11:15, 31 August 2019


Source

Abstract

Clubfootbrace.png

Introduction Open-source, self-replicating rapid prototypers (RepRaps) have radically reduced the costs of three-dimensional (3D) printing while expanding its access. Three-dimensional printing's model of distributed manufacturing can produce medical technologies at significantly reduced costs. We investigate this potential by evaluating the viability of an open-source 3D printable infant clubfoot brace.

Materials and Methods Starting with a list of key features present in currently available clubfoot braces, a 3D-printed clubfoot brace was developed in free and open-source CAD software (FreeCAD) to enable future customization. Polylactic acid, a biodegradable and recyclable bioplastic, was selected among the various commercial 3D printable materials based on strength and cost.

Results The results show that the open-source clubfoot brace matches or surpasses the physical features and mechanical degrees of freedom of all commercial- and nonprofit-developed brace designs while substantially reducing the costs of the braces to hospitals and families.

Conclusions The 3D-printed brace has the features of commercially available braces while significantly reducing the cost, making this clubfoot brace particularly appropriate for use in developing countries. In addition, the results indicated that this model of distributed manufacturing of medical technology is technically and economically appropriate through much of the Global South.

Keywords

clubfoot, clubfoot brace, foot abduction orthosis,distributed manufacturing; additive manufacturing; 3-D printing; economics; open-source; 

Template:Statusboxtop Template:Status-design Template:Status-model Template:Status-prototype Template:Status-verified You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

See also

Cookies help us deliver our services. By using our services, you agree to our use of cookies.