Main page
New page
Upload file
Help
Community portal
Recent changes
Talk
Contributions
Create account
Enable dark mode
Enable read mode
Log in
View history
What links here
Related changes
Page information
Editing
Open-Source Automated Mapping Four-Point Probe
(section)
From Appropedia
Warning!
You are not logged in.
Log in
or
create an account
to have your edits attributed to your username rather than your IP, along with other benefits.
Anti-spam check. Do
not
fill this in!
=== Positioning System === Insert the center coordinate of the positioning system bed (in terms of the printer coordinate system) in the X and Y text box in mm unit. Then select the COM port that is connected to the positioning system from the drop down list. Then click Connect button. Any system that accepts standard Gcode command over usb serial can be used as the positioning system.
Summary:
Warning!
All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see
Appropedia:Copyrights
for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource.
Do not submit copyrighted material without permission!
Cancel
Editing help
(opens in new window)
Cookies help us deliver our services. By using our services, you agree to our use of cookies.
OK
Discussion