Line 44: Line 44:
#Stabilize printer by eliminating number of structural components[[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:40, 1 December 2016 (PST)
#Stabilize printer by eliminating number of structural components[[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:40, 1 December 2016 (PST)
#Self cleaning/heating bed for reduce waste [[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:39, 1 December 2016 (PST)
#Self cleaning/heating bed for reduce waste [[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:39, 1 December 2016 (PST)
#Use of "Lock Tite" to eliminate loosening of connecting fasteners[[User:Jcvieau|Jcvieau]] ([[User talk:Jcvieau|talk]]) 07:42, 1 December 2016 (PST)

Revision as of 15:42, 1 December 2016

Raclark (talk) 07:25, 1 December 2015 (PST)

Definition from http://www.triz40.com/aff_Principles_TRIZ.php

If it will be necessary to do an action with both harmful and useful effects, this action should be replaced with anti-actions to control harmful effects. • Buffer a solution to prevent harm from extremes of pH.

Create beforehand stresses in an object that will oppose known undesirable working stresses later on. • Pre-stress rebar before pouring concrete. • Masking anything before harmful exposure: Use a lead apron on parts of the body not being exposed to X-rays. Use masking tape to protect the part of an object not being painted

This principle is proposed to solve the following contradictions: 2/325/276/47/148/1410/310/711/1412/1513/1414/614/815/317/317/419/1420/222/227/329/232/3434/934/1436/3337/2538/15

Solutions

  1. only allow bonding of printed material on certain areas of substrate to improve resolution (masking) Raclark (talk) 07:53, 1 December 2015 (PST)
  2. create print head with multiple extrusion points to speed printing in high resolution Raclark (talk) 07:53, 1 December 2015 (PST)
  3. stabilize printer with weights from shaking due to fast extruder head movement Raclark (talk) 07:43, 1 December 2015 (PST)
  4. design more universal and flexible extruder drive (like Chinese finger trap) Raclark (talk) 07:43, 1 December 2015 (PST)
  5. design retrofit of old parts to new printers to eliminate waste Raclark (talk) 07:43, 1 December 2015 (PST)
  6. use popular user interfaces to eliminate familiarizing time Raclark (talk) 07:43, 1 December 2015 (PST)
  7. add motion sensors to turn off printer if object enters print area Raclark (talk) 07:53, 1 December 2015 (PST)
  8. design cooled shield to protect user from accidentally touching hot end when heated Raclark (talk) 07:53, 1 December 2015 (PST)
  9. release chemical in air to bond with volatiles from printing to form inert and safe to breathe compound Raclark (talk) 07:53, 1 December 2015 (PST)
  10. release chemical in air to bond with volatiles from printing to form pleasant smelling compound Raclark (talk) 07:53, 1 December 2015 (PST)
  11. introduce additive to thermoplastic that releases a pleasant scent upon heating Raclark (talk) 07:53, 1 December 2015 (PST)
  12. design lighter parts by filling with lighter than air gas Raclark (talk) 07:06, 3 December 2015 (PST)
  13. print glue stick Raclark (talk) 07:06, 3 December 2015 (PST)
  14. add waste bin attachment to printer to keep waste Raclark (talk) 07:06, 3 December 2015 (PST)
  15. install noise dampening cushions Raclark (talk) 07:06, 3 December 2015 (PST)
  16. make all parts waterproof Raclark (talk) 07:06, 3 December 2015 (PST)
  17. print all parts from high temperature alloys Raclark (talk) 07:06, 3 December 2015 (PST)
  18. add thermal curtains for printing in cold environments Raclark (talk) 07:06, 3 December 2015 (PST)
  19. add thermal sink to convert excess heat to energy Raclark (talk) 07:11, 3 December 2015 (PST)
  20. use carbon nanotubes to strengthen prints Raclark (talk) 07:11, 3 December 2015 (PST)
  21. install safety latches on electronic cables Raclark (talk) 07:11, 3 December 2015 (PST)
  22. follow print path with laser to confirm print successful as it's printing Raclark (talk) 07:15, 3 December 2015 (PST)
  23. design printed parts with labels corresponding to how they fit into other printed parts Raclark (talk) 07:15, 3 December 2015 (PST)
  24. design sound-absorbent curtains Raclark (talk) 07:19, 3 December 2015 (PST)
  25. design self cleaning print bed to scrap excess glue Raclark (talk) 07:19, 3 December 2015 (PST)
  26. Stabilize printer by eliminating number of structural componentsJcvieau (talk) 07:40, 1 December 2016 (PST)
  27. Self cleaning/heating bed for reduce waste Jcvieau (talk) 07:39, 1 December 2016 (PST)
  28. Use of "Lock Tite" to eliminate loosening of connecting fastenersJcvieau (talk) 07:42, 1 December 2016 (PST)
Cookies help us deliver our services. By using our services, you agree to our use of cookies.