J.M.Pearce (talk | contribs) mNo edit summary |
J.M.Pearce (talk | contribs) mNo edit summary |
||
Line 12: | Line 12: | ||
# Print with inert gas in vacuum to have 3D printed gas in space [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | # Print with inert gas in vacuum to have 3D printed gas in space [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | ||
## Use for advertising [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | ## Use for advertising [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST) | ||
# Print with inert gas injected into window in final step for low 3 glass multipane windows in 3DP home [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
# Print with inert gas injected into walls in final step for energy efficient 3DP home [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
# Print with inert gas injected into ceiling/floor in final step for energy efficient 3DP home [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
# Blow inert gas with pressure during FFF to improve resolution of fine prints [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
# Blow inert gas at 3D print at end of print to remove from print bed[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
## Use this to automate multiprints [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
## Use for batch printing[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
## Use for scaled production[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
# Cool motors of 3DP to drive higher speeds with inert gas[[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:35, 1 December 2015 (PST) | |||
# |
Revision as of 15:35, 1 December 2015
- Print in vacuum to avoid contamination Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas for GMAW 3DP Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas injected into plastic to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas injected into metal to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas injected into ceramic to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel Joshua (talk) 07:30, 1 December 2015 (PST)
- Print with inert gas inside a sol for insulation Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas to create foam to 3DP isolation Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas in hyper cold environment to have inert gas solid Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas in vacuum to have 3D printed gas in space Joshua (talk) 07:32, 1 December 2015 (PST)
- Print with inert gas injected into window in final step for low 3 glass multipane windows in 3DP home Joshua (talk) 07:35, 1 December 2015 (PST)
- Print with inert gas injected into walls in final step for energy efficient 3DP home Joshua (talk) 07:35, 1 December 2015 (PST)
- Print with inert gas injected into ceiling/floor in final step for energy efficient 3DP home Joshua (talk) 07:35, 1 December 2015 (PST)
- Blow inert gas with pressure during FFF to improve resolution of fine prints Joshua (talk) 07:35, 1 December 2015 (PST)
- Blow inert gas at 3D print at end of print to remove from print bedJoshua (talk) 07:35, 1 December 2015 (PST)