(Created page with "{{777}} category:4777 TRIZ 3D printers # Print in vacuum to avoid contamination ~~~~ # Print with inert gas for GMAW 3DP ~~~~ # Print with inert gas injected into plastic ...")
 
mNo edit summary
Line 7: Line 7:
# Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST)
# Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST)
# Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST)
# Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:30, 1 December 2015 (PST)
# Print with inert gas inside a sol for insulation [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST)
# Print with inert gas to create foam to 3DP isolation [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST)
# Print with inert gas in hyper cold environment to have inert gas solid [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST)
# Print with inert gas in vacuum to have 3D printed gas in space [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST)
## Use for advertising [[User:J.M.Pearce|Joshua]] ([[User talk:J.M.Pearce|talk]]) 07:32, 1 December 2015 (PST)

Revision as of 15:32, 1 December 2015

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...
  1. Print in vacuum to avoid contamination Joshua (talk) 07:30, 1 December 2015 (PST)
  2. Print with inert gas for GMAW 3DP Joshua (talk) 07:30, 1 December 2015 (PST)
  3. Print with inert gas injected into plastic to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
  4. Print with inert gas injected into metal to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
  5. Print with inert gas injected into ceramic to reduce weight Joshua (talk) 07:30, 1 December 2015 (PST)
  6. Print with inert gas around object to avoid ionizing radiation from ruining resolution in SLA Joshua (talk) 07:30, 1 December 2015 (PST)
  7. Print with inert gas atmosphere while exposing to ionizing radiation to set up location of voxel Joshua (talk) 07:30, 1 December 2015 (PST)
  8. Print with inert gas inside a sol for insulation Joshua (talk) 07:32, 1 December 2015 (PST)
  9. Print with inert gas to create foam to 3DP isolation Joshua (talk) 07:32, 1 December 2015 (PST)
  10. Print with inert gas in hyper cold environment to have inert gas solid Joshua (talk) 07:32, 1 December 2015 (PST)
  11. Print with inert gas in vacuum to have 3D printed gas in space Joshua (talk) 07:32, 1 December 2015 (PST)
    1. Use for advertising Joshua (talk) 07:32, 1 December 2015 (PST)
Retrieved from "https://www.appropedia.org/w/index.php?title=Obvious_3D_printer_technology_based_on_39._Inert_environment&oldid=316300"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.