No edit summary
Line 20: Line 20:
#Limit radiant heat from extruder to focus on the print spot [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:38, 3 December 2015 (PST)
#Limit radiant heat from extruder to focus on the print spot [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:38, 3 December 2015 (PST)
#Use the material's inherent resistivity and run current through part keeping entire part at a desired temperature [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:38, 3 December 2015 (PST)
#Use the material's inherent resistivity and run current through part keeping entire part at a desired temperature [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:38, 3 December 2015 (PST)
#
#Dwell between layers to keep part below desired temperature [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:48, 3 December 2015 (PST)
#Use high thermal conductive inert gas to cool part quickly within a closed print volume [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:48, 3 December 2015 (PST)
#Use a cooling gas at extruder tip to rapidly cool part [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:48, 3 December 2015 (PST)
#Speed print speed to reduce excess heating of part [[User:Eli Gooding|Eli Gooding]] ([[User talk:Eli Gooding|talk]]) 07:48, 3 December 2015 (PST)

Revision as of 15:48, 3 December 2015

Homogeneity

Eli Gooding (talk) 06:58, 3 December 2015 (PST)

  1. Close off print volume to remove printing from all reactive atmosphere Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  2. Infill print volume with inert gas Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  3. Place evaporating cleaning solvent onto each print layer Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  4. Ensure consistent printing speed Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  5. Consistent print temperatures Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  6. Control cooling rates Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  7. Supply consistent or precision materia lEli Gooding (talk) 07:38, 3 December 2015 (PST)
  8. Supply or design material that has been fabricated for non-ideal conditions Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  9. Precision components for consistent printer production Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  10. Standardize all components of printer Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  11. Make all components with a "jig" or automation to ensure no variation between components Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  12. Print in a vacuum Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  13. Temperature controlled bed to keep material at wanted temperature Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  14. Temperature controlled print volume Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  15. Limit radiant heat from extruder to focus on the print spot Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  16. Use the material's inherent resistivity and run current through part keeping entire part at a desired temperature Eli Gooding (talk) 07:38, 3 December 2015 (PST)
  17. Dwell between layers to keep part below desired temperature Eli Gooding (talk) 07:48, 3 December 2015 (PST)
  18. Use high thermal conductive inert gas to cool part quickly within a closed print volume Eli Gooding (talk) 07:48, 3 December 2015 (PST)
  19. Use a cooling gas at extruder tip to rapidly cool part Eli Gooding (talk) 07:48, 3 December 2015 (PST)
  20. Speed print speed to reduce excess heating of part Eli Gooding (talk) 07:48, 3 December 2015 (PST)
Cookies help us deliver our services. By using our services, you agree to our use of cookies.