No edit summary |
Cjthormodson (talk | contribs) No edit summary |
||
Line 30: | Line 30: | ||
#'''auto switch filaments to use waste or recycled plastic for infill and new plastic for outer shells''' | #'''auto switch filaments to use waste or recycled plastic for infill and new plastic for outer shells''' | ||
#reversable print bed for multiple materials | #reversable print bed for multiple materials | ||
[[User:Cjthormodson|Cjthormodson]] ([[User talk:Cjthormodson|talk]]) 07:04, 4 December 2018 (PST) | |||
#Purchase an all metal hot end to better control the temperature of the filament. | |||
#Create filament with a better tolerance | |||
#Be able to print at the micro scale for layer heights to enhance the surface finish and allow for better tolerances to be met on the prints | |||
#Redesign the 3D printed parts of the printer | |||
#Constant auto bed leveling if the bed is warped. | |||
#Develop a better support method | |||
#Allow for more materials to be printed to enhance material properties | |||
#Control filament environment to reduce humidity and other things | |||
#Control printer environment to to prevent swings in temperature. | |||
#Build a bed that prevents peeling of parts | |||
#Smaller extruder nozzle to enhance quality | |||
#Larger drive motor for more consistent filament flow | |||
#Self cleaning hotend | |||
#Make a hotend that never plugs up | |||
#Improve cooling on small parts to prevent melting | |||
#Better stepper motors for more precise movements | |||
#Better frames to prevent Z wobble | |||
#Auto stop if failed print is detected | |||
#Remote monitoring of the printer so the user can watch it print from phone or tablet | |||
#Have the printer be controlled remotely | |||
#Multiple extruders with different diameter nozzles for more detailed printing | |||
#Multiple extruders for different materials | |||
#Faster cooling on the material after extruded. | |||
#Prevent shrinking until after the part in completed. | |||
#Different priced materials for different sections of a print. Ex. 1 for low quality and 1 for high quality |
Revision as of 15:05, 4 December 2018
Azw (talk) 07:19, 1 December 2015 (PST) Djchopp (talk) 07:19, 1 December 2015 (PST)
- adjust print settings for specified areas of object for tighter tolerances
- increase variance on some print parameters (temperature) to allow some areas to be printed faster than others.
- use lower quality materials in don't care areas of parts
- change control parameter to pressure instead of temperature for different extrusion materials in different parts of object
- include only high quality parts where precision is important, else use crap quality
- map print bed to account for non uniformity in print surface.
- add guards around some mechanical areas of printer to prevent entanglement, leave others exposed to allow open movement.
- change frame material from high quality wood to low quality trash as it isn't mechanically important
- multiple print heads that are automatically changeable for quality where its needed
- use multiple print heads of varying quality in parallel
- alert user when printing difficult sections so it can be closely monitored
- use feedback to alter print speed based on head resistance
- control environment quality around print head but leave print enclosure at ambient
- allow for localization of thermal control for print bed to conserve energy and allow for better release
- include high precision components for bed leveling, cut costs in other locations
- change infill for unimportant areas of print to cut material usage
- cool filament before it enters extruder
- bigger, sharper teeth on drive gear to allow more filament force
- self cleaning drive gear
- control environment filament is stored in when it is in use
- flash cool filament after it is extruded
- add sacrificial edge to aid in print removal
- use subtractive manufacturing where tight tolerances needed.
- auto switch filaments to use waste or recycled plastic for infill and new plastic for outer shells
- reversable print bed for multiple materials
Cjthormodson (talk) 07:04, 4 December 2018 (PST)
- Purchase an all metal hot end to better control the temperature of the filament.
- Create filament with a better tolerance
- Be able to print at the micro scale for layer heights to enhance the surface finish and allow for better tolerances to be met on the prints
- Redesign the 3D printed parts of the printer
- Constant auto bed leveling if the bed is warped.
- Develop a better support method
- Allow for more materials to be printed to enhance material properties
- Control filament environment to reduce humidity and other things
- Control printer environment to to prevent swings in temperature.
- Build a bed that prevents peeling of parts
- Smaller extruder nozzle to enhance quality
- Larger drive motor for more consistent filament flow
- Self cleaning hotend
- Make a hotend that never plugs up
- Improve cooling on small parts to prevent melting
- Better stepper motors for more precise movements
- Better frames to prevent Z wobble
- Auto stop if failed print is detected
- Remote monitoring of the printer so the user can watch it print from phone or tablet
- Have the printer be controlled remotely
- Multiple extruders with different diameter nozzles for more detailed printing
- Multiple extruders for different materials
- Faster cooling on the material after extruded.
- Prevent shrinking until after the part in completed.
- Different priced materials for different sections of a print. Ex. 1 for low quality and 1 for high quality