No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
[[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST) | [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST) | ||
[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 06:51, 3 December 2015 (PST) | |||
== Rushing through == | == Rushing through == | ||
| Line 17: | Line 18: | ||
# Retract already printed filament. | # Retract already printed filament. | ||
# Retract printed supports. | # Retract printed supports. | ||
# Print fast enough so warping is not an issue | |||
Revision as of 15:51, 3 December 2015
Thomas Korejsza (talk) 07:53, 1 December 2015 (PST)
Klbarie (talk) 06:51, 3 December 2015 (PST)
Rushing through
- Replace T5-belt with chain to increase resolution during changes in direction. (Higher speed around corners).
- Add faster motors for resolution.
- Auto support system (brim/raft).
- Return to home after error then immediately return to known position in gcode and begin printing again.
- Heat up and extrude out major clog's.
- Faster travel speed to reduce stringing.
- Print a second part on top of a first print.
- Integrated printed parts.
- Add felt feet strips to reduce noise.
- Add liquid cooling system instead of fan.
- Adjusting 3D printing legs and build platform.
- Retract already printed filament.
- Retract printed supports.
- Print fast enough so warping is not an issue