No edit summary |
No edit summary |
||
| Line 11: | Line 11: | ||
# Faster travel speed to reduce stringing. | # Faster travel speed to reduce stringing. | ||
# Print a second part on top of a first print. | # Print a second part on top of a first print. | ||
# | # Integrated printed parts. | ||
# Add felt feet strips to reduce noise. | # Add felt feet strips to reduce noise. | ||
# Add liquid cooling system instead of fan. | # Add liquid cooling system instead of fan. | ||
# Adjusting 3D printing legs and build platform. | # Adjusting 3D printing legs and build platform. | ||
# Retract already printed filament. | |||
# Retract printed supports. | |||
Revision as of 15:44, 3 December 2015
Thomas Korejsza (talk) 07:53, 1 December 2015 (PST)
Rushing through
- Replace T5-belt with chain to increase resolution during changes in direction. (Higher speed around corners).
- Add faster motors for resolution.
- Auto support system (brim/raft).
- Return to home after error then immediately return to known position in gcode and begin printing again.
- Heat up and extrude out major clog's.
- Faster travel speed to reduce stringing.
- Print a second part on top of a first print.
- Integrated printed parts.
- Add felt feet strips to reduce noise.
- Add liquid cooling system instead of fan.
- Adjusting 3D printing legs and build platform.
- Retract already printed filament.
- Retract printed supports.