Obvious 3D printer technology based on 21. Rushing through: Difference between revisions

Revision as of 15:19, 3 December 2015

Pneumatic or hydraulic systems

1) Replace T5-belt with chain to increase resolution during changes in direction. (Higher speed around corners).Thomas Korejsza (talk) 07:53, 1 December 2015 (PST) 2) Add faster motors for resolution. Thomas Korejsza (talk) 07:53, 1 December 2015 (PST) 3) Auto support system (brim/raft). Thomas Korejsza (talk) 07:53, 1 December 2015 (PST) 4) Return to home after error then immediately return to known position in gcode and begin printing again.Klbarie (talk) 07:19, 3 December 2015 (PST) 5) Heat up and extrude out major clog's.Klbarie (talk) 07:19, 3 December 2015 (PST) 6) Faster travel speed to reduce stringing.Klbarie (talk) 07:19, 3 December 2015 (PST) 7) Print a second part on top of a first print.Klbarie (talk) 07:19, 3 December 2015 (PST) 8) Integrated printed parts. Thomas Korejsza (talk) 07:53, 1 December 2015 (PST)

14) Add felt feet strips to reduce noise. Thomas Korejsza (talk) 07:53, 1 December 2015 (PST) 14) Add liquid cooling system instead of fan. Thomas Korejsza (talk) 07:53, 1 December 2015 (PST) 17) Adjusting 3D printing legs and build platform. Thomas Korejsza (talk) 07:53, 1 December 2015 (PST)

@@ Line 1: / Line 1: @@
 {{777}} [[category:4777 TRIZ 3D printers]]
+== Pneumatic or hydraulic systems ==
 ) Replace T5-belt with chain to increase resolution during changes in direction. (Higher speed around corners).[[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)
 ) Add faster motors for resolution. [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)
 ) Auto support system (brim/raft). [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)
-)
+)  Return to home after error then immediately return to known position in gcode and begin printing again.[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 07:19, 3 December 2015 (PST)
+) Heat up and extrude out major clog's.[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 07:19, 3 December 2015 (PST)
+) Faster travel speed to reduce stringing.[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 07:19, 3 December 2015 (PST)
+) Print a second part on top of a first print.[[User:Klbarie|Klbarie]] ([[User talk:Klbarie|talk]]) 07:19, 3 December 2015 (PST)
 )  Integrated printed parts. [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)
 ) Add felt feet strips to reduce noise. [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)
 ) Add liquid cooling system instead of fan. [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)
 ) Adjusting 3D printing legs and build platform. [[User:Thomas Korejsza|Thomas Korejsza]] ([[User talk:Thomas Korejsza|talk]]) 07:53, 1 December 2015 (PST)