No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
# force sensors in hot end for auto-leveling and calibration [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST) | # force sensors in hot end for auto-leveling and calibration [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST) | ||
# bulk group of printers printing simultaneously [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST) | # bulk group of printers printing simultaneously [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 06:59, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST) | ||
# | # '''running a current through connecting rods so printer knows when printer head is disconnected and can stop printing''' [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:05, 3 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:06, 3 December 2015 (PST) | ||
# continuous printing prevents jamming of hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:10, 3 December 2015 (PST) | # continuous printing prevents jamming of hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:10, 3 December 2015 (PST) | ||
# stores extra energy to conserve power [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:12, 3 December 2015 (PST) | # stores extra energy to conserve power [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:12, 3 December 2015 (PST) | ||
Revision as of 15:41, 3 December 2015
- design prints to reduce travel time Erik Bain (talk) 07:49, 1 December 2015 (PST) Cleyton (talk) 07:54, 1 December 2015 (PST)
- keep motors running at full speed Erik Bain (talk) 07:52, 1 December 2015 (PST) Cleyton (talk) 07:54, 1 December 2015 (PST)
- use multiple hot ends to keep printing continuous Erik Bain (talk) 07:52, 1 December 2015 (PST) Cleyton (talk) 07:54, 1 December 2015 (PST)
- quick automated calibration check at start of printing to ensure quality prints Erik Bain (talk) 06:59, 3 December 2015 (PST) Cleyton (talk) 07:06, 3 December 2015 (PST)
- force sensors in hot end for auto-leveling and calibration Erik Bain (talk) 06:59, 3 December 2015 (PST) Cleyton (talk) 07:06, 3 December 2015 (PST)
- bulk group of printers printing simultaneously Erik Bain (talk) 06:59, 3 December 2015 (PST) Cleyton (talk) 07:06, 3 December 2015 (PST)
- running a current through connecting rods so printer knows when printer head is disconnected and can stop printing Erik Bain (talk) 07:05, 3 December 2015 (PST) Cleyton (talk) 07:06, 3 December 2015 (PST)
- continuous printing prevents jamming of hot end Cleyton (talk) 07:10, 3 December 2015 (PST)
- stores extra energy to conserve power Cleyton (talk) 07:12, 3 December 2015 (PST)
- flywheel
- insulated hot end-less energy, faster printing Erik Bain (talk) 07:16, 3 December 2015 (PST) Cleyton (talk) 07:17, 3 December 2015 (PST)
- automatic adhesion (gluing or otherwise) Erik Bain (talk) 07:19, 3 December 2015 (PST) Cleyton (talk) 07:19, 3 December 2015 (PST)
- automatic starting of next part in QueueErik Bain (talk) 07:19, 3 December 2015 (PST) Cleyton (talk) 07:19, 3 December 2015 (PST)
- SMS text when part is done Erik Bain (talk) 07:19, 3 December 2015 (PST) Cleyton (talk) 07:19, 3 December 2015 (PST)
- remote monitoring via phone app Erik Bain (talk) 07:19, 3 December 2015 (PST) Cleyton (talk) 07:19, 3 December 2015 (PST)
- dual size heads, large for infill, small for border Cleyton (talk) 07:21, 3 December 2015 (PST)
- printer sleep mode to save power when not printing Cleyton (talk) 07:38, 3 December 2015 (PST)