Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Obvious 3D printer technology based on 19. Periodic action"

From Appropedia
Jump to: navigation, search
Line 9: Line 9:
 
# printer that has auto set up (bed cleaning, heat up automatic) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
 
# printer that has auto set up (bed cleaning, heat up automatic) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
 
#  
 
#  
# vibrating hot end (self cleaning) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
+
# vibrating hot end (self cleaning) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:39, 1 December 2015 (PST)
 
#
 
#
 
#
 
#

Revision as of 10:39, 1 December 2015

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.


  1. pulsing hot end Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  2. rotating bed, assembly line Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  3. multiple material print heads Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  4. assembly line of printers Cleyton (talk) 07:34, 1 December 2015 (PST)Erik Bain (talk) 07:39, 1 December 2015 (PST)
  5. print more efficiently with optics Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  6. printer that has auto set up (bed cleaning, heat up automatic) Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  7. vibrating hot end (self cleaning) Erik Bain (talk) 07:39, 1 December 2015 (PST) Cleyton (talk) 07:39, 1 December 2015 (PST)
  8. Print at lower motor frequencies Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)