Obvious 3D printer technology based on 19. Periodic action: Difference between revisions

Revision as of 15:44, 1 December 2015

pulsing hot end Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
rotating bed Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
multiple material print heads Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
assembly line of printers Cleyton (talk) 07:34, 1 December 2015 (PST)Erik Bain (talk) 07:39, 1 December 2015 (PST)
print more efficiently with optics Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
printer that has auto set up (bed cleaning, heat up automatic) Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
vibrating hot end (self cleaning) Erik Bain (talk) 07:39, 1 December 2015 (PST) Cleyton (talk) 07:39, 1 December 2015 (PST)
Print at lower motor frequencies to reduce noise Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
print different components at the same time Erik Bain (talk) 07:44, 1 December 2015 (PST)
vibrating bed to releaase print when it's done Erik Bain (talk) 07:44, 1 December 2015 (PST)

@@ Line 2: / Line 2: @@
 # pulsing hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
-# rotating bed, assembly line [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
+# rotating bed [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
 # multiple material print heads [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
-#
 # assembly line of printers [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)[[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
 # print more efficiently with optics [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
 # printer that has auto set up (bed cleaning, heat up automatic) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
-#
 # vibrating hot end (self cleaning) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:39, 1 December 2015 (PST)
-#
+# Print at lower motor frequencies to reduce noise [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
-#
+# print different components at the same time [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:44, 1 December 2015 (PST)
-#
+# vibrating bed to releaase print when it's done [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:44, 1 December 2015 (PST)
-#
-# Print at lower motor frequencies [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
-#
-#
-#
-#
-#
-#
-#
-#
-#
-#
-#