(Created page with "{{777}} category:4777 TRIZ 3D printers 1. pulsing hot end ~~~~ 2. rotating bed, assembly line ~~~~ 3. multiple material print heads ~~~~ 4. 5. assembly line of printers ...")
 
No edit summary
Line 1: Line 1:
{{777}} [[category:4777 TRIZ 3D printers]]
{{777}} [[category:4777 TRIZ 3D printers]]


1. pulsing hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# pulsing hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
2. rotating bed, assembly line [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# rotating bed, assembly line [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
3. multiple material print heads [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# multiple material print heads [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
4.
#
5. assembly line of printers [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# assembly line of printers [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
6. print more efficiently with optics [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# print more efficiently with optics [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
7. printer that has auto set up (bed cleaning, heat up automatic) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# printer that has auto set up (bed cleaning, heat up automatic) [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
8.
#
9.
#
10.
#
11.
#
12.
#
13.
#
14. Print at lower frequencies [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
# Print at lower motor frequencies [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST)
15.
#
16.
#
17.
#
18.
#
19.
#
20.
#
21.
#
22.
#
23.
#
24.
#
25.
#

Revision as of 15:37, 1 December 2015

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...
  1. pulsing hot end Cleyton (talk) 07:34, 1 December 2015 (PST)
  2. rotating bed, assembly line Cleyton (talk) 07:34, 1 December 2015 (PST)
  3. multiple material print heads Cleyton (talk) 07:34, 1 December 2015 (PST)
  5. assembly line of printers Cleyton (talk) 07:34, 1 December 2015 (PST)
  6. print more efficiently with optics Cleyton (talk) 07:34, 1 December 2015 (PST)
  7. printer that has auto set up (bed cleaning, heat up automatic) Cleyton (talk) 07:34, 1 December 2015 (PST)
  14. Print at lower motor frequencies Cleyton (talk) 07:34, 1 December 2015 (PST)
Retrieved from "https://www.appropedia.org/w/index.php?title=Obvious_3D_printer_technology_based_on_19._Periodic_action&oldid=316318"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.