Get our free book (in Spanish or English) on rainwater now - To Catch the Rain.

Difference between revisions of "Obvious 3D printer technology based on 19. Periodic action"

From Appropedia
Jump to: navigation, search
 
(9 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{777}} [[category:4777 TRIZ 3D printers]]
+
{{777}}{{TRIZ-3D}} [[category:4777 TRIZ 3D printers]]
 +
#pulsing  feed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#printing changing dimension periodically from u to v to w within periodic time [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
# shooting filament [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#cleaning head periodically
 +
#printing periodically at very high heat [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
# printing at high heat and cooling periodically[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#Switch between different colors of filament[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#having an external nozzle to start print occassionally[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#changing motor speed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#rotating bed and nozzle[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#printing at different angle[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#reduce noise by printing at a lower speed periodically[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#increase speed periodically
 +
#extruding different solution at times for different fragrance [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#alarm generation [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)
 +
# monitoring the speed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)
 +
#print from image [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)
 +
#print on non flat bed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)
 +
#able to spray print to increase speed [[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:31, 4 December 2018 (PST)
 +
 
 +
#connecting to mobile app and show status of printing[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#getting print command from mobile app[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
# able to pause and start from cell phone[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#inducing NVH characteristics[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#inducing thermodynamics characteristics[[User:Athachir|thachireth]] ([[User talk:Athachir|talk]]) 07:28, 4 December 2018 (PST)
 +
#having lights for printing
 +
 
 +
 
 +
 
 +
 
 +
 
  
 
# pulsing hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
 
# pulsing hot end [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:34, 1 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:39, 1 December 2015 (PST)
Line 25: Line 56:
 
# sense when hot end has been detached and stop all movement. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 3 December 2015 (PST)
 
# sense when hot end has been detached and stop all movement. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:48, 3 December 2015 (PST)
 
# auto removal of finished print, start another instantly [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:51, 3 December 2015 (PST)
 
# auto removal of finished print, start another instantly [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:51, 3 December 2015 (PST)
# earthquake powered 3D printer. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:51, 3 December 2015 (PST)
+
# earthquake powered 3D printer. [[User:Cleyton|Cleyton]] ([[User talk:Cleyton|talk]]) 07:51, 3 December 2015 (PST) [[User:Erik Bain|Erik Bain]] ([[User talk:Erik Bain|talk]]) 07:53, 3 December 2015 (PST)
 +
 
 +
# '''Wipe off pad to remove excess filament from nozzle'''[[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:42, 1 December 2016 (PST)
 +
# '''Automatic bed scraper to lift part and also clean bed'''[[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
 +
# Phone app to remotely start and stop printer [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
 +
# '''Phone app to remotely watch printer using webcam'''[[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
 +
# Dampeners to reduce the 3d printer from shaking [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
 +
# Different fan speeds for different printing temperatures [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
 +
 
 +
 
 +
 
 +
# pause after layers of printing to prevent failed overhangs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# change frequency of stepper motors to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# pulse the hot end to prevent clogs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# pulse the incoming filament to remove dust [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# pulse the duty cycle of the fan to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# add a frequency to the glass to create a heated bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# '''wipe the hot end between distant points to prevent stringing [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strength[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# while using multiple 3D printers use canceling frequencies to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# '''automatic bed cleaning [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# different print temperatures for different layers[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# different fan speeds at different temperatures [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# print at different start times with multiple printers [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# higher quality stepper motor for better resolution [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# '''find frequency of stepper motors and play a canceling frequency to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# '''smooth a printed object with a laser pulsed over the object [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# auto bed leveling [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
# pulsed rods for detection of print head knock off [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
 +
 
 +
 
 +
# Print in bursts rather than continuously [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Heat extruder head in bursts rather than continuously attempting to maintain temp to reduce energy [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Print walls and infill in different time points to maintain continuous printing of those parts [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Make controlled environment and use fans in bursts to maintain temp [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Travel in bursts for reduced noise
 +
# Use large vat of melted filament and pressure to extrude so extrusion of filament is only in bursts [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Pause longer between different parts on the same print to reduce stringing [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Pause longer between different layers to increase print quality [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Pause longer between printing the wall and the infill to decrease potential problems [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Pause longer after heating up to ensure homogenous heating of the hot end [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# '''Pause longer after heating up to ensure homogenous heating of the print bed [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Pause longer when calibrating to ensure proper calibration [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
 +
# Pause longer before changing direction of motors [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)

Latest revision as of 15:33, 4 December 2018

MOST Delta filament as guide.JPG This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printing

Please leave comments using the discussion tab. The course runs in the Fall semester. It is not open edit.



Noedpatent.jpg
Notice: Broad and/or obvious patent claims for 3-D printing technology may hamper the open-source 3-D printing community's ability to innovate. Previous work on an algorithm protected 3-D printing materials. This page is part of a MTU Open Source 3-D Printing class project to investigate 3-D printing concepts using TRIZ and is presented here as a defensive publication of prior art to help identify obvious 'inventions' for 3-D printing.

Examiners: The ideas on this page dated Dec 3, 2015 and Nov 29, 2016 were developed by university students with less than a semester of formal 3-D printing experience (or by an instructor in class) and thus should be considered unpatentable because of obviousness to any person skilled in the art of additive manufacturing.
Appropedians: This page is open edit. Please fee free to add ideas and sign them below with ~~~~ or to use any of the ideas to built better open-source 3-D printers.


  1. pulsing feed thachireth (talk) 07:28, 4 December 2018 (PST)
  2. printing changing dimension periodically from u to v to w within periodic time thachireth (talk) 07:28, 4 December 2018 (PST)
  3. shooting filament thachireth (talk) 07:28, 4 December 2018 (PST)
  4. cleaning head periodically
  5. printing periodically at very high heat thachireth (talk) 07:28, 4 December 2018 (PST)
  6. printing at high heat and cooling periodicallythachireth (talk) 07:28, 4 December 2018 (PST)
  7. Switch between different colors of filamentthachireth (talk) 07:28, 4 December 2018 (PST)
  8. having an external nozzle to start print occassionallythachireth (talk) 07:28, 4 December 2018 (PST)
  9. changing motor speed thachireth (talk) 07:28, 4 December 2018 (PST)
  10. rotating bed and nozzlethachireth (talk) 07:28, 4 December 2018 (PST)
  11. printing at different anglethachireth (talk) 07:28, 4 December 2018 (PST)
  12. reduce noise by printing at a lower speed periodicallythachireth (talk) 07:28, 4 December 2018 (PST)
  13. increase speed periodically
  14. extruding different solution at times for different fragrance thachireth (talk) 07:28, 4 December 2018 (PST)
  15. alarm generation thachireth (talk) 07:31, 4 December 2018 (PST)
  16. monitoring the speed thachireth (talk) 07:31, 4 December 2018 (PST)
  17. print from image thachireth (talk) 07:31, 4 December 2018 (PST)
  18. print on non flat bed thachireth (talk) 07:31, 4 December 2018 (PST)
  19. able to spray print to increase speed thachireth (talk) 07:31, 4 December 2018 (PST)
  1. connecting to mobile app and show status of printingthachireth (talk) 07:28, 4 December 2018 (PST)
  2. getting print command from mobile appthachireth (talk) 07:28, 4 December 2018 (PST)
  3. able to pause and start from cell phonethachireth (talk) 07:28, 4 December 2018 (PST)
  4. inducing NVH characteristicsthachireth (talk) 07:28, 4 December 2018 (PST)
  5. inducing thermodynamics characteristicsthachireth (talk) 07:28, 4 December 2018 (PST)
  6. having lights for printing




  1. pulsing hot end Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  2. rotating bed Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  3. multiple material print heads Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  4. assembly line of printers Cleyton (talk) 07:34, 1 December 2015 (PST)Erik Bain (talk) 07:39, 1 December 2015 (PST)
  5. print more efficiently with optics Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  6. printer that has auto set up (bed cleaning, heat up automatic) Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  7. vibrating hot end (self cleaning) Erik Bain (talk) 07:39, 1 December 2015 (PST) Cleyton (talk) 07:39, 1 December 2015 (PST)
  8. Print at lower motor frequencies to reduce noise Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  9. print different components at the same time Erik Bain (talk) 07:44, 1 December 2015 (PST)
  10. vibrating bed to releaase print when it's done Erik Bain (talk) 07:44, 1 December 2015 (PST)
  11. more steps in stepper motor to increase resolution Erik Bain (talk) 07:46, 1 December 2015 (PST) Cleyton (talk) 07:46, 1 December 2015 (PST)
  12. sound waves to sense location of bed, auto calibration Cleyton (talk) 07:48, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  13. sound waves to sense location of object, ensure quality print Cleyton (talk) 07:48, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  14. use optics to send more information Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  15. Split print into sections to ensure cooling time Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  16. Use multiple identical hot ends during print to put out more plastic Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  17. Sounds a proximity alarm Cleyton (talk) 06:59, 3 December 2015 (PST)
  18. print different sections at different times to have fully moveable parts. Cleyton (talk) 06:59, 3 December 2015 (PST)
  19. print in sections to allow time for hot end to stabilize Cleyton (talk) 07:48, 3 December 2015 (PST)
  20. play note when print is done Cleyton (talk) 07:48, 3 December 2015 (PST)
  21. play a noise cancelation note to quite all noise from printer Cleyton (talk) 07:49, 3 December 2015 (PST)
  22. play noise when print has error Cleyton (talk) 07:48, 3 December 2015 (PST)
  23. sense when hot end has been detached and stop all movement. Cleyton (talk) 07:48, 3 December 2015 (PST)
  24. auto removal of finished print, start another instantly Cleyton (talk) 07:51, 3 December 2015 (PST)
  25. earthquake powered 3D printer. Cleyton (talk) 07:51, 3 December 2015 (PST) Erik Bain (talk) 07:53, 3 December 2015 (PST)
  1. Wipe off pad to remove excess filament from nozzleMatthewPollack (talk) 07:42, 1 December 2016 (PST)
  2. Automatic bed scraper to lift part and also clean bedMatthewPollack (talk) 07:50, 1 December 2016 (PST)
  3. Phone app to remotely start and stop printer MatthewPollack (talk) 07:50, 1 December 2016 (PST)
  4. Phone app to remotely watch printer using webcamMatthewPollack (talk) 07:50, 1 December 2016 (PST)
  5. Dampeners to reduce the 3d printer from shaking MatthewPollack (talk) 07:50, 1 December 2016 (PST)
  6. Different fan speeds for different printing temperatures MatthewPollack (talk) 07:50, 1 December 2016 (PST)


  1. pause after layers of printing to prevent failed overhangs Btrevett (talk) 07:13, 4 December 2018 (PST)
  2. change frequency of stepper motors to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  3. pulse the hot end to prevent clogs Btrevett (talk) 07:13, 4 December 2018 (PST)
  4. pulse the incoming filament to remove dust Btrevett (talk) 07:13, 4 December 2018 (PST)
  5. pulse the duty cycle of the fan to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  6. add a frequency to the glass to create a heated bed Btrevett (talk) 07:13, 4 December 2018 (PST)
  7. wipe the hot end between distant points to prevent stringing Btrevett (talk) 07:13, 4 December 2018 (PST)
  8. pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strengthBtrevett (talk) 07:13, 4 December 2018 (PST)
  9. while using multiple 3D printers use canceling frequencies to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  10. automatic bed cleaning Btrevett (talk) 07:13, 4 December 2018 (PST)
  11. different print temperatures for different layersBtrevett (talk) 07:13, 4 December 2018 (PST)
  12. different fan speeds at different temperatures Btrevett (talk) 07:13, 4 December 2018 (PST)
  13. print at different start times with multiple printers Btrevett (talk) 07:13, 4 December 2018 (PST)
  14. higher quality stepper motor for better resolution Btrevett (talk) 07:13, 4 December 2018 (PST)
  15. find frequency of stepper motors and play a canceling frequency to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  16. smooth a printed object with a laser pulsed over the object Btrevett (talk) 07:13, 4 December 2018 (PST)
  17. auto bed leveling Btrevett (talk) 07:13, 4 December 2018 (PST)
  18. pulsed rods for detection of print head knock off Btrevett (talk) 07:13, 4 December 2018 (PST)


  1. Print in bursts rather than continuously Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  2. Heat extruder head in bursts rather than continuously attempting to maintain temp to reduce energy Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  3. Print walls and infill in different time points to maintain continuous printing of those parts Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  4. Make controlled environment and use fans in bursts to maintain temp Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  5. Travel in bursts for reduced noise
  6. Use large vat of melted filament and pressure to extrude so extrusion of filament is only in bursts Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  7. Pause longer between different parts on the same print to reduce stringing Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  8. Pause longer between different layers to increase print quality Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  9. Pause longer between printing the wall and the infill to decrease potential problems Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  10. Pause longer after heating up to ensure homogenous heating of the hot end Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  11. Pause longer after heating up to ensure homogenous heating of the print bed Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  12. Pause longer when calibrating to ensure proper calibration Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)
  13. Pause longer before changing direction of motors Reis G.M. Jones (talk) 07:27, 4 December 2018 (PST)