No edit summary
No edit summary
Line 33: Line 33:
# Dampeners to reduce the 3d printer from shaking [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# Dampeners to reduce the 3d printer from shaking [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# Different fan speeds for different printing temperatures [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# Different fan speeds for different printing temperatures [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# pause after layers of printing to prevent failed overhangs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# change frequency of stepper motors to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the hot end to prevent clogs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the incoming filament to remove dust [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the duty cycle of the fan to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# add a frequency to the glass to create a heated bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# wipe the hot end between distant points to prevent stringing [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strength[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# while using multiple 3D printers use canceling frequencies to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# automatic bed cleaning [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# different print temperatures for different layers[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# different fan speeds at different temperatures [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# print at different start times with multiple printers [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# higher quality stepper motor for better resolution [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# find frequency of stepper motors and play a canceling frequency to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# smooth a printed object with a laser pulsed over the object [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# auto bed leveling [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulsed rods for detection of print head knock off [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)

Revision as of 15:13, 4 December 2018

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...
Broad and/or obvious patent claims for 3-D printing technology may hamper the open-source 3-D printing community's ability to innovate. Previous work on an algorithm protected 3-D printing materials. This page is part of a MTU Open Source 3-D Printing class project to investigate 3-D printing concepts using TRIZ and is presented here as a defensive publication of prior art to help identify obvious 'inventions' for 3-D printing.
Examiners: The ideas on this page dated Dec 3, 2015 and Nov 29, 2016 were developed by university students with less than a semester of formal 3-D printing experience (or by an instructor in class) and thus should be considered unpatentable because of obviousness to any person skilled in the art of additive manufacturing.
Appropedians: This page is open edit. Please fee free to add ideas and sign them below with ~~~~ or to use any of the ideas to built better open-source 3-D printers.
  1. pulsing hot end Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  2. rotating bed Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  3. multiple material print heads Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  4. assembly line of printers Cleyton (talk) 07:34, 1 December 2015 (PST)Erik Bain (talk) 07:39, 1 December 2015 (PST)
  5. print more efficiently with optics Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  6. printer that has auto set up (bed cleaning, heat up automatic) Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  7. vibrating hot end (self cleaning) Erik Bain (talk) 07:39, 1 December 2015 (PST) Cleyton (talk) 07:39, 1 December 2015 (PST)
  8. Print at lower motor frequencies to reduce noise Cleyton (talk) 07:34, 1 December 2015 (PST) Erik Bain (talk) 07:39, 1 December 2015 (PST)
  9. print different components at the same time Erik Bain (talk) 07:44, 1 December 2015 (PST)
  10. vibrating bed to releaase print when it's done Erik Bain (talk) 07:44, 1 December 2015 (PST)
  11. more steps in stepper motor to increase resolution Erik Bain (talk) 07:46, 1 December 2015 (PST) Cleyton (talk) 07:46, 1 December 2015 (PST)
  12. sound waves to sense location of bed, auto calibration Cleyton (talk) 07:48, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  13. sound waves to sense location of object, ensure quality print Cleyton (talk) 07:48, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  14. use optics to send more information Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  15. Split print into sections to ensure cooling time Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  16. Use multiple identical hot ends during print to put out more plastic Cleyton (talk) 07:52, 1 December 2015 (PST) Erik Bain (talk) 07:54, 1 December 2015 (PST)
  17. Sounds a proximity alarm Cleyton (talk) 06:59, 3 December 2015 (PST)
  18. print different sections at different times to have fully moveable parts. Cleyton (talk) 06:59, 3 December 2015 (PST)
  19. print in sections to allow time for hot end to stabilize Cleyton (talk) 07:48, 3 December 2015 (PST)
  20. play note when print is done Cleyton (talk) 07:48, 3 December 2015 (PST)
  21. play a noise cancelation note to quite all noise from printer Cleyton (talk) 07:49, 3 December 2015 (PST)
  22. play noise when print has error Cleyton (talk) 07:48, 3 December 2015 (PST)
  23. sense when hot end has been detached and stop all movement. Cleyton (talk) 07:48, 3 December 2015 (PST)
  24. auto removal of finished print, start another instantly Cleyton (talk) 07:51, 3 December 2015 (PST)
  25. earthquake powered 3D printer. Cleyton (talk) 07:51, 3 December 2015 (PST) Erik Bain (talk) 07:53, 3 December 2015 (PST)
  1. Wipe off pad to remove excess filament from nozzleMatthewPollack (talk) 07:42, 1 December 2016 (PST)
  2. Automatic bed scraper to lift part and also clean bedMatthewPollack (talk) 07:50, 1 December 2016 (PST)
  3. Phone app to remotely start and stop printer MatthewPollack (talk) 07:50, 1 December 2016 (PST)
  4. Phone app to remotely watch printer using webcamMatthewPollack (talk) 07:50, 1 December 2016 (PST)
  5. Dampeners to reduce the 3d printer from shaking MatthewPollack (talk) 07:50, 1 December 2016 (PST)
  6. Different fan speeds for different printing temperatures MatthewPollack (talk) 07:50, 1 December 2016 (PST)
  1. pause after layers of printing to prevent failed overhangs Btrevett (talk) 07:13, 4 December 2018 (PST)
  2. change frequency of stepper motors to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  3. pulse the hot end to prevent clogs Btrevett (talk) 07:13, 4 December 2018 (PST)
  4. pulse the incoming filament to remove dust Btrevett (talk) 07:13, 4 December 2018 (PST)
  5. pulse the duty cycle of the fan to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  6. add a frequency to the glass to create a heated bed Btrevett (talk) 07:13, 4 December 2018 (PST)
  7. wipe the hot end between distant points to prevent stringing Btrevett (talk) 07:13, 4 December 2018 (PST)
  8. pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strengthBtrevett (talk) 07:13, 4 December 2018 (PST)
  9. while using multiple 3D printers use canceling frequencies to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  10. automatic bed cleaning Btrevett (talk) 07:13, 4 December 2018 (PST)
  11. different print temperatures for different layersBtrevett (talk) 07:13, 4 December 2018 (PST)
  12. different fan speeds at different temperatures Btrevett (talk) 07:13, 4 December 2018 (PST)
  13. print at different start times with multiple printers Btrevett (talk) 07:13, 4 December 2018 (PST)
  14. higher quality stepper motor for better resolution Btrevett (talk) 07:13, 4 December 2018 (PST)
  15. find frequency of stepper motors and play a canceling frequency to reduce noise Btrevett (talk) 07:13, 4 December 2018 (PST)
  16. smooth a printed object with a laser pulsed over the object Btrevett (talk) 07:13, 4 December 2018 (PST)
  17. auto bed leveling Btrevett (talk) 07:13, 4 December 2018 (PST)
  18. pulsed rods for detection of print head knock off Btrevett (talk) 07:13, 4 December 2018 (PST)
Retrieved from "https://www.appropedia.org/w/index.php?title=Obvious_3D_printer_technology_based_on_19._Periodic_action&oldid=377142"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.