Warning! You are not logged in. Log in or create an account to have your edits attributed to your username rather than your IP, along with other benefits.

The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then publish the changes below to finish undoing the edit.

Latest revision Your text
Line 65: Line 65:
# Dampeners to reduce the 3d printer from shaking [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# Dampeners to reduce the 3d printer from shaking [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# Different fan speeds for different printing temperatures [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)
# Different fan speeds for different printing temperatures [[User:MatthewPollack|MatthewPollack]] ([[User talk:MatthewPollack|talk]]) 07:50, 1 December 2016 (PST)


# pause after layers of printing to prevent failed overhangs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pause after layers of printing to prevent failed overhangs [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
Line 74: Line 72:
# pulse the duty cycle of the fan to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the duty cycle of the fan to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# add a frequency to the glass to create a heated bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# add a frequency to the glass to create a heated bed [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# '''wipe the hot end between distant points to prevent stringing [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# wipe the hot end between distant points to prevent stringing [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strength[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulse the filament with two opposing pulses while printing with 100% fill to add an extra layer of strength[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# while using multiple 3D printers use canceling frequencies to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# while using multiple 3D printers use canceling frequencies to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# '''automatic bed cleaning [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# automatic bed cleaning [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# different print temperatures for different layers[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# different print temperatures for different layers[[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# different fan speeds at different temperatures [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# different fan speeds at different temperatures [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# print at different start times with multiple printers [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)  
# print at different start times with multiple printers [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)  
# higher quality stepper motor for better resolution [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)  
# higher quality stepper motor for better resolution [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)  
# '''find frequency of stepper motors and play a canceling frequency to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# find frequency of stepper motors and play a canceling frequency to reduce noise [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# '''smooth a printed object with a laser pulsed over the object [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# smooth a printed object with a laser pulsed over the object [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# auto bed leveling [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)  
# auto bed leveling [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)  
# pulsed rods for detection of print head knock off [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
# pulsed rods for detection of print head knock off [[User:Btrevett|Btrevett]] ([[User talk:Btrevett|talk]]) 07:13, 4 December 2018 (PST)
Line 98: Line 96:
# Pause longer between printing the wall and the infill to decrease potential problems [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer between printing the wall and the infill to decrease potential problems [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer after heating up to ensure homogenous heating of the hot end [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer after heating up to ensure homogenous heating of the hot end [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# '''Pause longer after heating up to ensure homogenous heating of the print bed [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer after heating up to ensure homogenous heating of the print bed [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer when calibrating to ensure proper calibration [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer when calibrating to ensure proper calibration [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer before changing direction of motors [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
# Pause longer before changing direction of motors [[User:Rgjones|Reis G.M. Jones]] ([[User talk:Rgjones|talk]]) 07:27, 4 December 2018 (PST)
Warning! All contributions to Appropedia are released under the CC-BY-SA-4.0 license unless otherwise noted (see Appropedia:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here! You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted material without permission!
Cancel Editing help (opens in new window)

Templates used on this page:

This page is a member of a hidden category:

Retrieved from "https://www.appropedia.org/Obvious_3D_printer_technology_based_on_19._Periodic_action"
Cookies help us deliver our services. By using our services, you agree to our use of cookies.