No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
# raise and lower build plate [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST) | # raise and lower build plate [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST) | ||
# cut mass from extruder [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST) | # cut mass from extruder [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST) | ||
# | # lubricate up rails to reduce friction [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST) | ||
# align and level printer to reduce friction due to binding [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:05, 4 December 2018 (PST) | |||
# jet material onto print to eliminate the need to change the Z-axis [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:05, 4 December 2018 (PST) | |||
# limit the height of the printer [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:05, 4 December 2018 (PST) | |||
# | |||
Revision as of 15:05, 4 December 2018
Tacopaul11 (talk) 07:21, 1 December 2015 (PST)
Nicolas Winkler (talk) 07:23, 1 December 2015 (PST)
- use counterweights on each axis to offset extruder weight Bproman (talk) 07:02, 4 December 2018 (PST)
- raise and lower build plate Bproman (talk) 07:02, 4 December 2018 (PST)
- cut mass from extruder Bproman (talk) 07:02, 4 December 2018 (PST)
- lubricate up rails to reduce friction Bproman (talk) 07:02, 4 December 2018 (PST)
- align and level printer to reduce friction due to binding Bproman (talk) 07:05, 4 December 2018 (PST)
- jet material onto print to eliminate the need to change the Z-axis Bproman (talk) 07:05, 4 December 2018 (PST)
- limit the height of the printer Bproman (talk) 07:05, 4 December 2018 (PST)
- Move print bed up and down to allow for easier head changing.
- Add counter weights to for the head unit to lower energy cost.
- Telescopic runners to increase z depth.
- Springs along the runners to make the resting position of the head above he bed.
- Counter weight for the filament, less work for the extruder motor.
- Drip molten material in controlled volumes to cool on the print surface.