No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
[[User:Nicolas Winkler|Nicolas Winkler]] ([[User talk:Nicolas Winkler|talk]]) 07:23, 1 December 2015 (PST) | [[User:Nicolas Winkler|Nicolas Winkler]] ([[User talk:Nicolas Winkler|talk]]) 07:23, 1 December 2015 (PST) | ||
# | # Move print bed up and down to allow for easier head changing. | ||
# | # Add counter weights to for the head unit to lower energy cost. | ||
# | # Telescopic runners to increase z depth. | ||
# | # Springs along the runners to make the resting position of the head above he bed. | ||
# | # Counter weight for the filament, less work for the extruder motor. | ||
# | # Drip molten material in controlled volumes to cool on the print surface. | ||
# | # | ||
# | # | ||
# | # |
Revision as of 15:53, 1 December 2015
Tacopaul11 (talk) 07:21, 1 December 2015 (PST)
Nicolas Winkler (talk) 07:23, 1 December 2015 (PST)
- Move print bed up and down to allow for easier head changing.
- Add counter weights to for the head unit to lower energy cost.
- Telescopic runners to increase z depth.
- Springs along the runners to make the resting position of the head above he bed.
- Counter weight for the filament, less work for the extruder motor.
- Drip molten material in controlled volumes to cool on the print surface.