Editing Obvious 3D printer technology based on 12. Equipotentiality

{{777 notice}}{{TRIZ-3D}}

  [[User:Tacopaul11|Tacopaul11]] ([[User talk:Tacopaul11|talk]]) 07:21, 1 December 2015 (PST)

[[User:Nicolas Winkler|Nicolas Winkler]] ([[User talk:Nicolas Winkler|talk]]) 07:23, 1 December 2015 (PST)

# use counterweights on each axis to offset extruder weight [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST)
# raise and lower build plate [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST)
# cut mass from extruder [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST)
# lubricate up rails to reduce friction [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:02, 4 December 2018 (PST)
# align and level printer to reduce friction due to binding [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:05, 4 December 2018 (PST)
# jet material onto print to eliminate the need to change the Z-axis [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:05, 4 December 2018 (PST)
# limit the height of the printer [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:05, 4 December 2018 (PST)
# flip the printer on it's side to reduce change in height [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:08, 4 December 2018 (PST)
# flip printer upside down to use gravity to change Z height [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]])
# print in zero gravity [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:11, 4 December 2018 (PST)
# attach red helium filled balloon to extruder head to reduce extruder weight, stick in sewer for better effects [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:11, 4 December 2018 (PST)
# only print 1 layer [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:13, 4 December 2018 (PST)




# Move print bed up and down to allow for easier head changing. 
# Add counter weights to for the head unit to lower energy cost.
# Telescopic runners to increase z depth. 
# Springs along the runners to make the resting position of the head above he bed. 
# Counter weight for the filament, less work for the extruder motor.
# Drip molten material in controlled volumes to cool on the print surface.
# 
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#

























# For a DLP or SLA printer change the level of the resin rather than moving the print bed (similar to a water lock) [[User:Kerautio|Kerautio]] ([[User talk:Kerautio|talk]]) 07:51, 1 December 2016 (PST)

{{Page data}}

[[category:4777 TRIZ 3D printers]]
@@ Line 17: / Line 17: @@
 # attach red helium filled balloon to extruder head to reduce extruder weight, stick in sewer for better effects [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:11, 4 December 2018 (PST)
 # only print 1 layer [[User:Bproman|Bproman]] ([[User talk:Bproman|talk]]) 07:13, 4 December 2018 (PST)
-# Create components as lean as possible to reduce movements needed [[User:Ajwunder|Andrew W]] ([[User talk:Ajwunder|talk]]) 07:27, 4 December 2018 (PST)
-# Use a larger nozzle to cover more volume [[User:Ajwunder|Andrew W]] ([[User talk:Ajwunder|talk]]) 07:27, 4 December 2018 (PST)
-# Spring loaded part remover [[User:Ajwunder|Andrew W]] ([[User talk:Ajwunder|talk]]) 07:27, 4 December 2018 (PST)
-# Have plastics in a automated loading system to reduce plastic change over movement [[User:Ajwunder|Andrew W]] ([[User talk:Ajwunder|talk]]) 07:27, 4 December 2018 (PST)
-# Only print small parts [[User:Ajwunder|Andrew W]] ([[User talk:Ajwunder|talk]]) 07:27, 4 December 2018 (PST)