Obvious 3D printer technology based on 01. Segmentation: Difference between revisions

This page was part of an MTU course MSE4777 OA and MSE4777 OB/MSE5777/EE4777/EE5777: Open-source 3-D printingPlease leave comments using the talk page. The course runs in the Fall semester. It is not open edit.Read more...

Bllafata (talk) 07:17, 1 December 2015 (PST) WayneHelminen (talk) 07:18, 1 December 2015 (PST)

1. Ants with print heads on them Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
2. Print with colonies of ants Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
3. Independent print heads for different materials Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
4. Breakup the parts of the printer so that it is locally sourced "junk" Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
5. Tablet interface, click on picture form online repository and it auto downloads, slices, and sends the gcode to the printer. Bllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
6. Nanobots that mate with nanobots of the connecting part WayneHelminen (talk) 07:44, 1 December 2015 (PST)
7. Nanobots that maintain the integrity of the machine WayneHelminen (talk) 07:44, 1 December 2015 (PST)
8. Part picker and 3D printer in one that places electrical components in desired locations as the print is madeBllafata (talk) 07:33, 1 December 2015 (PST) WayneHelminen (talk) 07:42, 1 December 2015 (PST)
9. Gather "lost" energy on indiviudal parts, i.e. heat exchanger on hotend to heat water to steam and power a small turbine to recoup some of that loss. Also attach with motors since those can get hot as well. Bllafata (talk) 07:49, 1 December 2015 (PST) WayneHelminen (talk) 06:52, 3 December 2015 (PST)
10. Printers hooked up in parallel to print large parts together. Bllafata (talk) 07:44, 1 December 2015 (PST)
11. Reduce waste by reducing the number of failed prints due to poor bed adhesion by having a quick adhesion test before long prints Bllafata (talk) 06:59, 3 December 2015 (PST) WayneHelminen (talk) 07:01, 3 December 2015 (PST)
12. Reduce parts by reducing a 3D printer to a pen-like device where you manually control the extrusion of the material. Bllafata (talk) 07:02, 3 December 2015 (PST)
13. 3D scanner, part picker and printer all in one (scanner on the arms of the printer/three different head atachments) so that you can place an item in the printer and have it scan, move and print a replica WayneHelminen (talk) 07:15, 3 December 2015 (PST)
14. Large scale printer with part picker to create buildings WayneHelminen (talk) 07:12, 3 December 2015 (PST)
15. Array of printer heads that simultaneously print array of parts WayneHelminen (talk) 07:12, 3 December 2015 (PST)
16. Not segmentation, but printing in a vacuum so that you can print in ‘space’ and not have to print on a bed WayneHelminen (talk) 07:12, 3 December 2015 (PST)
17. make certain joints on the 3DP detachable/movable to “build” a larger printer from smaller printers. WayneHelminen (talk) 07:04, 3 December 2015 (PST)
18. Segment the printer head to have different channels to print two materials simultaneously (maybe even at different temperatures.) WayneHelminen (talk) 07:04, 3 December 2015 (PST)
19. Attach printer heads to robotics arms to reduce print time and reduce overhang. WayneHelminen (talk) 07:04, 3 December 2015 (PST) Bllafata (talk) 07:06, 3 December 2015 (PST)
20. Reduce cost of materials by having a reclaimer break down objects to base components to be used in printing. Bllafata (talk) 07:06, 3 December 2015 (PST)
21. Easier to maintain by sensors knowing the next likely part to fail, and printing the replacement part for it. Bllafata (talk) 07:09, 3 December 2015 (PST)