Line 10: Line 10:
{{boxbottom}}
{{boxbottom}}


==Abstract==
==Objective==
 
To provide a low cost, open source solution for 3D-printing in high performance materials such as PEEK (polyether ether ketone), PEI (polyetherimide) and PC (polycarbonate), to increase the availability to engineers, makers and medical professionals to print in these materials.


== Bill of Materials==
== Bill of Materials==

Revision as of 16:40, 14 December 2018

OSHE HT Printer.jpg

High Temperature 3D Printer for Open Source Hardware Enterprise

Senior Design project developed by Aubrey Woern and Daniel Scsavnicki

Template:Statusboxtop Template:Status-design Template:Status-prototype You can help Appropedia by contributing to the next step in this OSAT's status. Template:Boxbottom

Objective

To provide a low cost, open source solution for 3D-printing in high performance materials such as PEEK (polyether ether ketone), PEI (polyetherimide) and PC (polycarbonate), to increase the availability to engineers, makers and medical professionals to print in these materials.

Bill of Materials

Tools needed for fabrication of the OSAT

  1. MOST Delta RepRap or similar RepRap 3-D printer
  2. Allen Wrench (For M5 and M3 Bolts)
  3. Soldering Iron and Solder

Skills and Knowledge Necessary to Make the OSAT

Technical Specifications and Assembly Instructions

Common Problems and Solutions

Cost savings

Case Study Prints

References

Cookies help us deliver our services. By using our services, you agree to our use of cookies.